Ultrakote UVSeal Single Pack Clear Polyurethane Concrete Sealer
High-gloss polyurethane topcoat with excellent UV and yellowing resistance
- Ideal clear protective coat for epoxy flake flooring systems
- Excellent wear, abrasion and chemical resistance for durable floor protection
- Suitable for interior and exterior commercial and industrial applications
Available in stock
Ultrakote UV Seal Single Pack UV Stable Clear Polyurethane Concrete Sealer
Ultrakote UVSeal is a premium UV-stable clear polyurethane concrete sealer designed to protect and enhance concrete, epoxy, flake, and metallic flooring systems. This single-pack moisture-curing aliphatic polyurethane forms a tough, durable, high-gloss protective coating that resists yellowing, abrasion, weathering, and hot tyre pickup.
Unlike traditional two pack polyurethane systems, Ultrakote UVSeal is a ready-to-use single-pack formula that requires no mixing. This makes it ideal for both professional installers and DIY users looking for a reliable and easy-to-apply concrete floor sealer. Once cured, the coating creates a smooth, glossy, easy-to-clean surface that provides long-lasting protection in both indoor and outdoor environments.
UVSeal is commonly used as a clear topcoat for decorative flake flooring, metallic epoxy floors, and sealed concrete surfaces where UV resistance and durability are essential. The aliphatic polyurethane formulation ensures excellent colour stability, making it suitable for areas exposed to sunlight such as garages, patios, balconies, and commercial entrances.
Key Advantages
- Single-pack polyurethane formula – no mixing required
- UV stable clear sealer that resists yellowing and sunlight damage
- Ideal topcoat for epoxy flake floors and metallic flooring systems
- Excellent abrasion resistance for high-traffic areas
- Resistant to hot tyre pickup, chemicals, and everyday wear
- Smooth high-gloss finish that enhances floor appearance
- Easy application with roller, brush, or spray
- Suitable for DIY users and professional installers
Areas of Use
Ultrakote UVSeal is designed for sealing and protecting a wide range of concrete and resin flooring systems including:
- Garage floors
- Decorative flake flooring systems
- Metallic epoxy flooring
- Sealed concrete floors
- Patios and balconies
- Warehouses and workshops
- Showrooms and retail spaces
- Commercial and industrial floors
The coating provides a durable protective layer that improves floor appearance while helping extend the life of the surface underneath.
Packaging and Coverage
Ultrakote UVSeal is available in 4L and 8L containers. Coverage will vary depending on the surface profile and porosity of the substrate.
Typical coverage rates:
- Flake flooring topcoat
- 4L – approximately 20 to 25 m² per coat
- 8L – approximately 40 to 50 m² per coat
Two coats are generally recommended to achieve optimal protection, durability, and finish quality.
Surface Preparation
- Proper surface preparation is critical for achieving long-lasting results when applying any polyurethane concrete sealer.
- For best results, concrete should be mechanically prepared using diamond grinding to remove laitance and open the surface pores. This allows the sealer to penetrate and bond properly.
- Existing concrete surfaces should be clean, dry, and free from contaminants such as grease, oil, dust, or curing compounds. Older surfaces may require degreasing, pressure washing, or acid etching prior to sealing.
Application Guidelines
- Ultrakote UVSeal can be applied using a roller, brush, or spray equipment. Two coats are typically recommended for most flooring systems.
- When applying to bare or porous concrete, the first coat can be thinned with approximately 5% general purpose thinners to improve penetration.
- For slip-resistant finishes, aluminium oxide or other anti-slip media can be added between coats depending on the level of slip resistance required.
- Once cured, the coating forms a durable, glossy protective layer that enhances the appearance of the floor while making it easier to clean and maintain.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
What Our Customers Say
See what trade professionals, contractors and customers have to say about their experience with ProTrade Warehouse.
