UltraKote Floating Anti-Slip Media
Lightweight anti-slip media designed for epoxy and polyurethane coatings
- Helps create safe, slightly slip-resistant flooring surfaces
- Easy-to-clean finish for garages, workshops and warehouses
Available in stock
Ultrakote Floating Anti-Slip Media is specifically formulated to produce easy-to-keep clean and safe-to-walk on floor coatings. The lightweight nature of fine anti-slip media will allow it to float in high solids epoxy and polyurethane products and it will not settle like heavier anti-slip media and does not change the physical properties of the coating.
It is the best solution for garage, warehouse and workshop floor-coating projects that require a slightly slip-resistant floor covering.
If you like to purchase the product in bulk, send us a message and we will get back to you with a competitive price.
Available in Fine and Medium.
Important notes
- Our recommendation is to add one container of Ultrakote Floating Anti-Slip Media per up to 10 litres of coloured epoxy or polyurethane product's final coat and mix it for one minute using an electric drill. Apply the mixed product using a 10 - 12mm nap roller
- To achieve a uniform finish, the product should be rolled down and then back rolled, for large floor areas, consider purchasing epoxy spike shoes to allow you to walk on the wet coating
- This anti-slip media might achieve P2 or R9 Slip rating - to achieve a higher slip rating, consider broadcasting aluminum oxide or sand over the wet epoxy film and applying a locking coat over the anti-slip media.
- Not suitable for restaurants, Commercial Kitchen floors and areas subject to water pooling.
- May change the look of clear products.
Back-rolling technique video
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
What Our Customers Say
See what trade professionals, contractors and customers have to say about their experience with ProTrade Warehouse.
