Solutions Sealers Densify K Colloidal Potassium Silicate Sealer
Densify-K is a high-performance colloidal potassium silicate sealer, primarily used as the first stage in the concrete polishing process. Suitable for both domestic and commercial applications, it provides exceptional durability and protection for concrete surfaces. This high solids formula chemically bonds to the substrate, offering superior dust-proofing and hardening capabilities. As a water-based densifying sealer, it ensures a safer, environmentally friendly application while delivering robust performance. It's invisible finish maintains the natural appearance of your concrete surfaces, making it an ideal choice for enhancing and protecting polished concrete.
Choose Densify-K for an effective and reliable solution in the concrete polishing process, ensuring your surfaces are hardened and dust-proofed to perfection.
Preparation:
- Always test product on an area first and allow a 1 hour cure time to determine the ease of application and suitability of your surface.
- Ensure surface is clean and free of residues and other contaminates.
- Use proper PPE as per details on the SDS.
- Do not thin product or alter formula.
- Concrete should be 28 days old
Coverage:
About 10 square metres per litre per coat depending on porosity of surface
Application:
Apply when surface temperature is between 5 – 35 degrees C. Use a broom, mop or squeegee to spread product evenly across the area. Saturate the surface without leaving puddles. Always remove excess product after 30 minutes. If a surface is particularly porous, a second coat can be applied preferably after 12 hours. Do not allow excess product to dry on surface. Densifying surface for floor polishing. Can be used as a hardener on a boney or weak slab. After application leave overnight before grinding slab and recoat with Densify K. Leave overnight after each application of Densify K and before resin grinding and using Densify L.
Download and read all the datasheets prior to application.
Visit Solutions Sealer to learn more about this product.
What is Densify K used for?
Densify K is designed as the first stage in the concrete polishing process, providing excellent surface hardening and dust-proofing. It strengthens concrete and prepares it for further polishing or sealing stages.
Will Densify K change the appearance of my concrete?
No. Densify K leaves an invisible finish that preserves the natural look of concrete while improving its durability and hardness.
How do I apply Densify K?
Apply when the surface temperature is between 5°C and 35°C using a broom, mop, or squeegee. Saturate the surface evenly without puddling, and remove any excess product after 30 minutes. For porous surfaces, a second coat can be applied after 12 hours.
What is the coverage rate of Densify K?
Coverage is approximately 10 square metres per litre per coat, depending on the surface porosity and condition.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
