SikaGrout Deep Pour Cementitious Grout - 20kg
Flowable precision cementitious grout for deep pours up to 500 mm
- Suitable for machine bedplates, anchor bolts, bridge bearings and precast sections
- 20 kg bag yields approximately 9.8 litres of grout
High Strength, Shrinkage Compensating Grout for Deep Pours up to 500mm
SikaGrout Deep Pour is a ready-mixed, high-quality Portland cement grout designed for deep pour applications up to 500mm. It features a unique two-stage expansion mechanism (Class A and C) to counteract shrinkage, achieves high early and 28-day strengths, and offers excellent flow characteristics.
Uses:
- Mass grouting/concreting
- Machine bedplates
- Anchor bolts
- Bridge bearing pads
- Pre-cast concrete sections
Features:
- Shrinkage compensating properties
- High early strengths
- High 28 day strengths
- Good flow characteristics
- Adjustable consistency
- Good impact and thermal resistance
- Non-corrosive to steel or iron
- Lab tested in accordance with AS 1478.2
Product Information:
- Composition: Cement, selected aggregates and special additives
- Packaging: 20 kg bags
- Appearance and colour: Grey powder
- Maximum grain size: Dmax: 4.0 mm
- Fresh mortar density: ~ 2,300 kg/m³
Application Information:
- Mixing ratio: 2.5 - 2.8 litres of water for 20kg powder
- Yield: 20 kg of powder yields approximately 9.8 litres of grout
- Layer thickness: min. 20 mm / max. 500 mm (for > 500 mm, add clean aggregate)
- Flowability: ~ 500 mm (Flow trough)
- Pot Life (at +20°C): ~30 minutes
- Setting time (at 23°C): Initial Set ~ 4 hrs 40 mins, Final Set ~ 7 hrs 45 mins
Application Instructions:
Substrate Quality / Pre-treatment: Surfaces must be clean, sound, and free of contaminants. Roughen surfaces for maximum bond. Saturate surfaces with water several hours prior to grouting, ensuring no standing water.
Mixing: Mechanically mix a full bag with 2.5 - 2.8 litres of water for 3-5 minutes until lump-free. Do not exceed maximum water amount.
Application: Can be placed by gravity flow or pump. Pour from one side to avoid air entrapment. Maintain grout head for continuous flow. Rodding or tamping can aid compaction. Cure for at least 7 days using appropriate methods.
Cleaning of Equipment: Clean all tools with water immediately after use. Hardened material can only be removed mechanically.
Need a reliable grout for deep pours? SikaGrout Deep Pour offers exceptional strength and shrinkage compensation.
Get unbeatable trade prices and fast nationwide shipping on all Sika products. Pick up your order from our store, Sika Wetherill Park in Sydney, or any Sika warehouse nationwide.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
What Our Customers Say
See what trade professionals, contractors and customers have to say about their experience with ProTrade Warehouse.
