Sikafloor-550 PA - High Performance Polyaspartic Resin Coating
Durable, UV & Abrasion Resistant Sikafloor Finish
Sikafloor-550 PA is a clear and pigmented 2-component polyaspartic resin coating. This Sikafloor product offers high solids, low viscosity, high strength, and a rapid cure time, along with excellent resistance to UV and abrasion.
Typical Uses:
As a high-performance resin coating and finish coat for Sikafloor flooring systems, Sikafloor-550 PA is ideal for:
- Automotive workshops
- Clean rooms
- Amenities areas
- Educational trade facilities
- General commercial premises
Key Advantages of this Resin Coating:
- Totally UV stable – maintains its appearance over time.
- Low VOC – contributes to better air quality.
- Excellent chemical and abrasion resistance – ensures long-lasting durability.
- Fast cure turn around time – minimizes downtime.
Product Details:
-
Composition: Aliphatic Polyurea Resin
-
Packaging Options: 8 litres & 40 litres kits
-
Shelf Life: 12 months from the production date
-
Storage: Keep in original, unopened packaging, dry, between +5 °C and +30 °C.
-
Appearance & Colours: Available as a Clear resin coating and in Pigmented - N45 Koala Grey, Light Grey, White, Window Grey, Golden Yellow, Dusty Grey.
-
Density (at +23°C): (Refer to the datasheet for specific densities of Clear and Pigmented Part A, Part B, and Mixed Resin)
-
Mixing Ratio: (Refer to the datasheet for specific mixing ratios by weight and volume for Clear and Pigmented versions)
Coverage:
Approx. 5 - 8 m² per litre per coat. Consumption depends on the surface profile and texture of the underlying Sikafloor system.
Application Guidelines:
-
Ambient Temperature: +2 °C min. / +25 °C max.
-
Pot Life (at ±23°C): Approximately 40 minutes.
-
Curing Time (at ±23°C): Around 24 hours.
-
Recoating Time (at ±23°C): Approximately 6 hours.
Application Instructions:
Substrate Preparation: Ensure the surface is clean, dry, and free from contaminants. Remove all dust and loose material. A pull-off strength of ≥ 1.5 N/mm² is required. Sikafloor-550 PA is a finish resin coating and should be applied over a suitable Sikafloor system. Consult Sika Technical for specific recommendations.
Mixing: Mechanically premix Part A until uniform. Pour Part B into Part A (or coloured Part A) and mix thoroughly for 1 minute. Only mix the amount needed within the pot life. Avoid excessive mixing speed. Do not seal the mixed product container.
Application: Before applying this resin coating, check substrate moisture, humidity, and dew point. Apply Sikafloor-550 PA by brush, roller, or spray. Ensure clean, dry tools. Avoid over-rolling. For the first coat, use 5-6 m²/litre. Thinning is not advised. For a textured floor, apply at 5 m²/litre and broadcast aggregate. Allow 6 hours to dry before removing excess aggregate. Apply the second resin coating within 6-18 hours, or sand after 18 hours. Use 6-8 m²/litre for the second coat. Allow 12 hours for pedestrian traffic, 24 hours for vehicles, and 2 days for chemical/heavy abrasion exposure.
Equipment Cleaning: Clean tools immediately with Thinner C. Cured resin coating can only be removed mechanically.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
