Nutech PaveCoat H2O Concrete Sealer
PaveCoat H2O is a cutting-edge, water-based acrylic penetrating sealer that delivers superior performance in various functional, decorative, and protective concrete applications. Designed to provide concrete with the utmost durability, PaveCoat H2O creates an ideal surface for pedestrian and light vehicle traffic, making it a cost-effective, environmentally friendly, and long-lasting choice. Its advanced formula seals, colours, and safeguards concrete, making it resistant to abrasions, stains, and other damages. The standard gloss finish of PaveCoat H2O enhances the aesthetic appeal of concrete surfaces and provides a refined and expertly crafted appearance.
Typical Uses
- Concrete driveways
- Garage floors
- Factory floors and workshops
- Stencil and slate impression concrete
Benefits
- Water-based, low VOC
- Available in clear and 29 standard colours
- Can be custom colour-matched upon request
- Highly durable
- Excellent UV light resistance
- Resistant to fading
- Non-yellowing
- Resistant to oil and grease
Appearance
Milky or coloured viscous liquid
Coverage Rate
6 m²/L
Provisions
PaveCoat H2O IS NOT suitable to recoat over any existing coatings other than recoating PaveCoat H2O finishes.
Anti-Slip properties: Without the addition of an anti-slip additive, PaveCoat may not be suitable for steep, smooth surfaces or areas of high trafficability. The addition of a Nutech AntiSlip Mix In product is recommended which will meet the performance criteria outlined in AS 4586 and AS 4663 Wet P2 or Wet P3 Pendulum rating, depending on the grade and addition level. Refer to the PaveCoat Application Guide for further information.
Note: For steep inclines and gradients greater than 1 in 14, a P5 or R12 rating will be required. Nutech Paint recommends EPiC PolyCryl (Exterior & Interior) OR EPiC Epoxy 500 (Interior only) with the addition of the suitable AntiSlip Cast On products for this application.
Recommended Substrates
- All types of concrete
- Footpaths
- Paving
- Driveways
- Tilt slab construction
- Asbestos and cement sheeting
- Slate flooring
- Concrete roof tiles
- Pattern paving
- Stamped and slate impression paving
- Stencil paving
- Spray paving
Substrate Note
PaveCoat H2O is recommended for NEW or OLD UN-COATED concrete surfaces only.
Powdery or Soft Concrete: DO NOT Etch or Acid Wash as this may damage the surface.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
