Nutech Agreseal Clear 20L | Exposed Aggregate Sealer
Nutech Agreseal High Gloss Exposed Aggregate Sealer Clear 20L
Agreseal is a deep penetrating, solvent based acrylic sealer that provides a glossy wet look to exposed aggregate, repelling water and enhancing the aggregate’s natural colour. Agreseal is a 2 coat system that will protect the surface from most stains such as grease and oil, providing a durable surface ideal for pedestrian and light vehicle traffic.
Features
- Improves surface performance of the concrete
- Enhances concrete and aggregate colours
- Helps protect against freeze/thaw damage
- Protects against most stains and many household chemicals
- Repels grease, oil and water
- Non-yellowing providing a high gloss, wet look
- Low maintenance to improves cleaning
- Easily recoated
Provisions
- DO NOT apply Agreseal late in the day as the risk of surface damage caused by dew and condensation increases.
- Sealer affected by moisture loses gloss and clear sealers may appear milky when dry.
- If bubbles appear due to air entrapment during application, scrubbing with a solvent wet broom the next day will repair any damage.
- Soft or damaged surfaces SHOULD NOT be sealed without special surface treatment to stabilise and harden the concrete.
- Before applying Nutech Agreseal to old, existing aggregate surfaces, test for the presence of an existing sealer. Refer Nutech Coatings Test Kit to assess compatibility.
Typical Applications
Typical projects include Domestic & Multi Density Residential, Industrial and Commercial applications where exposed aggregate are used and excellent exterior durability is required.
Appearance
Colourless viscous liquid
Coverage / Spread Rate
3-5m²/L
Note: Coverage will depend on the porosity and roughness of the surface.
To maximise performance do not over spread.
Packaging
20L
Storage
Cool, dry location. Avoid contact with direct sunlight and heat
Shelf Life
Stored 24 months @ 25°C
Recommended Substrates
Agreseal should only be used on:
- New or old exposed aggregate concrete surfaces
- Old, pre-coated compatible sealed concrete aggregate surfaces
The surface must be thoroughly dry before applying the first coat.
If the surface is affected by white efflorescence, broom over with clean Pavecoat Thinners to dissolve and dissipate all salts prior to sealing.
Note: DO NOT park vehicles on newly applied Agreseal for at least 7 days.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
What Our Customers Say
See what trade professionals, contractors and customers have to say about their experience with ProTrade Warehouse.