Flowcrete Satin Seal WB Water Based Polyurethane Sealer Clear 4Kg Kit
Two-component, clear water-based polyurethane sealer with UV-stable satin finish
- Suitable for decorative Flowcrete systems and polished concrete surfaces.
- Approx. 20–33m² coverage per 4kg kit for each coat.
- Low VOC, non-yellowing and suitable for internal and external areas.
Satin Seal (WB) is a two-component, clear high solids, UV light stable, water-based polyurethane sealer designed to provide a satin finish for decorative flooring systems.
It is typically used as a seal coat for Flowcrete decorative systems and can also be applied directly onto polished concrete surfaces.
The water-based polyurethane formulation provides excellent colour stability when exposed to UV light and offers a non-yellowing finish. With a pre-formulated satin finish, Satin Seal (WB) does not require the addition of a matting agent before application.
Designed for easy roller application, Satin Seal (WB) provides a smooth or non-slip satin finish and is suitable for internal and external applications according to the manufacturer requirements.
Key Benefits of Satin Seal (WB)
- Clear water-based polyurethane sealer
- UV light stable and non-yellowing formulation
- Satin finish appearance
- Low VOC formulation
- Easy roller application
- No matting agent required
- Suitable for internal and external applications
- Provides colour stability under UV exposure
Where Can Satin Seal (WB) Be Used?
Satin Seal (WB) is typically used as:
- A seal coat for Flowcrete decorative systems
- A clear protective seal coat over polished concrete
- A satin finish sealer for compatible flooring applications
Components:
- Base A: 3.17kg
- Hardener B: 0.83kg
- Kit size: 4kg
- Volume: Approximately 3.64 litres
| Application | Coat | Coverage Rate |
|---|---|---|
| Over Ground Concrete | First Coat | 0.12–0.2kg/m² Approx. 10m²/L–5.5m²/L |
| Second Coat | 0.12–0.2kg/m² Approx. 10m²/L–5.5m²/L |
|
| Note: A minimum of two coats should be applied over unsealed concrete. | ||
| Over Flowcrete Terrosso Flake | First Coat | 0.15–0.2kg/m² Approx. 7.7m²/L–5.5m²/L |
| Second Coat | 0.15–0.2kg/m² Approx. 7.7m²/L–5.5m²/L |
|
Important Note: Always refer to the latest Flowseal UV Satin Product Datasheet, Technical Data Sheet, and Safety Data Sheet for complete technical information, application requirements, limitations, and safety instructions before use.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
What Our Customers Say
See what trade professionals, contractors and customers have to say about their experience with ProTrade Warehouse.
