Epirez Multi II Concrete Repair
High-strength epoxy mortar for concrete repairs and construction bonding
- Non-sag formula suits vertical and overhead repair applications
- Bonds concrete, steel, timber, tiles and stone with strong adhesion
- 3kg covers approximately 1m² at 2mm thickness
EPIREZ Multi-Purpose Epoxy Concrete Repair is a high-strength epoxy mortar patching compound designed for repairing concrete and bonding a range of construction materials. Its non-sag, paste-like consistency makes it suitable for application to vertical and overhead surfaces by knife or trowel.
The equal-part epoxy system is designed for easy mixing and application. Once mixed, it forms a concrete-grey repair compound with excellent adhesion, good chemical and water resistance, and a non-shrink formulation.
Multi-Purpose Epoxy Concrete Repair can be used for damaged and honeycombed concrete, damaged factory floors, pipe repairs, and bonding tiles, metal, stone and timber to concrete.
Key Features and Benefits
- Multi-purpose epoxy repair: Suitable for concrete repairs and bonding applications.
- Non-sag consistency: Paste-like formulation stays in place on vertical and overhead surfaces.
- Equal-part mixing: Hardener and Compound are mixed in equal amounts.
- High strength: Ultimate compressive strength is 60 MPa.
- Excellent adhesion: Bonds to concrete, steel and timber surfaces.
- Non-shrink formulation: Designed for repair and bonding applications.
- Good chemical resistance: Suitable for applications requiring chemical resistance.
- Good water resistance: Provides resistance to water.
- 100% solids: Contains 0 g/L VOC.
- Concrete-grey finish: Mixed material produces a grey colour.
Where Can EPIREZ Multi-Purpose Epoxy Concrete Repair Be Used?
This epoxy repair compound is designed for a range of building, construction and repair applications.
- Repairing damaged concrete
- Repairing honeycombed concrete
- Joining and repairing pipes
- Bonding tiles to metal or concrete
- Bonding metal to concrete
- Bonding stone to concrete
- Bonding wood to concrete
- Repairing damaged factory concrete floors
Coverage and Kit Sizes
| Kit Size | Volume | Estimated Coverage | Application Thickness |
|---|---|---|---|
| 3 kg | 2 L | 1 m² | 2 mm |
| 12 kg | 8 L | 1 m² | 8 mm |
Concrete Surface Preparation
Remove previous coatings, loose crumbly material and drummy areas before applying the epoxy repair compound.
- New concrete must be at least 28 days old.
- Remove oil and grease contamination using a suitable surface degreaser.
- Hose off using high-pressure water.
- Captive blast clean to expose firmly adhered aggregate.
- Allow the surface to dry before application.
- Scrub or wire brush soiled concrete before washing with clean water.
- Allow the surface to dry after cleaning.
- Prime porous concrete with EPIREZ® Epoxy Primer / Sealer before application.
Steel Surface Preparation
Steel surfaces should be thoroughly prepared before applying Multi-Purpose Epoxy Concrete Repair.
- Abrasive blast clean to AS 1627 Part 4:2005.
- Prepare to a Class 3 white-metal finish.
- Achieve a minimum profile height of 75–100 microns.
- Remove paint, rust and other contamination by wire brushing, grinding or abrasive blasting.
- Remove grease and oil using a suitable solvent cleaner or surface degreaser.
Mixing Instructions
EPIREZ Multi-Purpose Epoxy Concrete Repair uses an equal-part mixing ratio of Hardener and Compound.
- Measure equal amounts of Hardener and Compound.
- Mix using a broad knife, spatula or low-speed drill and mixing paddle.
- Continue mixing until the material reaches an even colour.
- Apply the mixed material to the prepared surface with pressure.
The pot life is approximately 45 minutes at 25°C, so prepare only the amount that can be applied within the available working time.
Application
Apply the mixed epoxy repair compound to the prepared surface using a trowel, working the material into the surface with pressure.
For a smooth finish, use a damp trowel to finish the surface.
Protect the repaired area from mechanical and chemical exposure until the material is fully cured.
Because the cured product has excellent adhesion, it can be difficult to remove after hardening. Protect adjoining surfaces with masking tape and remove the tape before the material hardens.
Technical Specifications
| Specification | Technical Data |
|---|---|
| Product | EPIREZ® Multi-Purpose Epoxy Concrete Repair |
| Previous Name | EPIREZ® MULTI II |
| Product Type | Epoxy mortar patching compound |
| Mixing Ratio | Equal parts Hardener and Compound |
| Mixed Colour | Grey |
| Solids Content | 100% |
| VOC Content | 0 g/L |
| Pot Life @ 25°C | 45 minutes |
| Hardening Time @ 25°C | 6 hours |
| Cure Time @ 25°C | 24 hours |
| Application Temperature | 10°C to 30°C |
| Ultimate Compressive Strength | 60 MPa |
| Ultimate Tensile Strength | 12 MPa |
| Concrete Bond Strength | 2.7 MPa (substrate failure) |
| Steel Bond Strength | 10 MPa |
| Timber Bond Strength | 5.0 MPa (substrate failure) |
| Water Permeability | 2.0 × 10-17 m·s-1 |
| Concrete Coverage | 3 kg / 2 L: 1 m² at 2 mm; 12 kg / 8 L: 1 m² at 8 mm |
Important: Always read the current manufacturer's Technical Data Sheet before mixing, surface preparation or application.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
What Our Customers Say
See what trade professionals, contractors and customers have to say about their experience with ProTrade Warehouse.
