Dulux Luxafloor HSG Epoxy Floor Coating
Luxafloor HSG (High Solids Gloss) is a high gloss, two pack epoxy floor coating for concrete floors.
It is high build, making it an ideal choice for coating floors that are subject to heavy traffic. It is a durable epoxy floor coating option for commercial, industrial and garage floors.
Features
- Very high gloss finish
- Ideal for interior areas subject to high wear
- Easy to apply – good flow out
- Tintable – available in a wide range of colours
- Excellent chemical resistance
Uses
It is high build, making it an ideal choice for coating floors that are subject to heavy traffic, including industrial epoxy flooring, garage floor epoxy, and commercial floor coating applications.
Luxafloor HSG is available in a wide range of colours from the Luxafloor Colour Chart and can be tinted using the Dulux Colorfast tint system.
Resistance Guide
- Weatherability: Will yellow with time. Will chalk on exposure to UV. Neither yellowing nor chalking detracts from the protective properties of the coating. Use a weatherable topcoat if appearance is important.
- Solvents: Good resistance to splash and spillage of aromatic and aliphatic hydrocarbon solvents and alcohols.
- Heat Resistance: Up to 120°C dry heat.
- Water: Excellent resistance to fresh and salt water but not suitable for immersion.
- Salts: Excellent resistance to neutral and alkaline salts when suitably topcoated.
- Alkalis: Good resistance to splash and spillage of most common alkalis.
- Acids: Suitable for splash and spillage of mild acids.
- Abrasion: Excellent when fully cured. 128 mg weight loss per 1000 cycles, using a CS-17 wheel and a 1 kg load ASTM D4060.
Finish
High Gloss
Pot Life
1 hour (10 litre kit, 25°C)
Mixing Ratio V/V
Part A: 3 ,Part B: 1
Suitable Substrates
Suitably primed and properly prepared concrete by mechanical means (diamond ground, blast track or similar).
Download datasheets for more product information & application guide.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
