Dulux Luxafloor ECO2 Water Borne Epoxy Floor Coating - 10L
Dulux Luxafloor ECO2 - Waterborne Epoxy Floor Coating
Dulux Luxafloor ECO2 is a low-build, waterborne, two-pack epoxy floor coating that provides a durable, hardwearing surface. It is ideal for use in areas subject to foot traffic and is designed as an eco-friendly low VOC floor coating.
Luxafloor ECO2 can also be applied as a slip-resistant finish with the addition of Luxafloor Aggregates. It is available in a range of factory-made and tinted colours, as well as clear. This makes it suitable for a wide variety of commercial and industrial flooring applications.
Luxafloor ECO2 is especially useful in internal floor areas where the odour of conventional epoxy floor coatings prevents their use. Luxafloor Clear Coat may be used directly on concrete or as a protective coat over a Luxafloor ECO2 colour finish.
Features
- Tough film
- Waterborne, low VOC (less than 10g/L) and low odour
- Excellent adhesion to concrete
- Good chemical resistance
- Available in a range of factory-made and tinted colours, plus clear
Uses
Luxafloor ECO2 is a low-build, waterborne, two-pack epoxy floor coating that provides a hardwearing surface. It is ideal for use in internal floor areas where the odour of conventional epoxy floor coatings prevents their use
Resistance Guide
- Weatherability: Will yellow with time and chalk on exterior exposure (does not affect protective properties). Use a weatherable topcoat if required for appearance.
- Solvents: Good resistance to splash and spillage of aromatic and aliphatic hydrocarbon solvents and alcohols
- Water: Excellent resistance to fresh and salt water (not suitable for immersion)
- Heat Resistance: Up to 120°C dry heat
- Alkalis: Good resistance to splash and spillage of most common alkalis
- Salts: Excellent resistance to neutral and alkaline salts
- Abrasion: Excellent when fully cured (CS-17 Wheels 120mgs/1000 cycles, Taber Abraser 1000gm load/wheel)
- Acids: Good resistance to splash and spillage of dilute acids
Finish
Semi-gloss
Pot Life
2 hours (10 litre kit, 25°C)
Mixing Ratio (V/V)
Part A: 1 | Part B: 2
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
What Our Customers Say
See what trade professionals, contractors and customers have to say about their experience with ProTrade Warehouse.
