Devcon Brushable Ceramic 1KG | Ceramic Filled Epoxy Coating
Ceramic-filled epoxy coating for industrial erosion, corrosion and wear protection
- Suitable for pumps, valves, heat exchangers and water-circulating equipment
- Covers approximately 1.56m² per kg at 0.38mm thickness
Brushable Ceramic is a high-performance, ceramic-filled epoxy coating designed to seal, protect and repair surfaces exposed to erosion, corrosion and wear.
Its low-viscosity, self-levelling formulation can be applied using a short-bristle brush or roller. It is designed for industrial equipment including pump casings, impeller blades, gate valves, water boxes and fan blades, as well as heat exchangers, tube sheets and other water-circulating equipment.
Brushable Ceramic can also be used as a topcoat over repaired surfaces or to seal and protect new equipment exposed to erosion and corrosion.
Key Features and Benefits
- Ceramic-filled epoxy: Designed for demanding erosion, corrosion and wear protection.
- Excellent chemical resistance: Suitable for equipment exposed to demanding chemical environments.
- High temperature resistance: Suitable for service temperatures up to 177°C.
- Easy application: Can be applied using a short-bristle brush or roller.
- Low viscosity: Self-levelling liquid helps achieve an even coating.
- Pinholes and holidays: Two thin coats help provide complete substrate coverage.
- Machinable after cure: Can be machined, drilled or painted after functional cure.
Where Can Brushable Ceramic Be Used?
Brushable Ceramic is designed for industrial equipment and surfaces exposed to erosion, corrosion and wear.
- Pump casings
- Impeller blades
- Gate valves
- Water boxes
- Fan blades
- Heat exchangers
- Tube sheets
- Water-circulating equipment
- Repaired surfaces requiring a protective topcoat
- New equipment exposed to erosion and corrosion
Coverage
| Application Thickness | Coverage |
|---|---|
| 0.38 mm (0.015") | Approximately 1.56 m²/kg |
Technical Specifications
| Specification | Technical Data |
|---|---|
| Product | Brushable Ceramic |
| Product Type | Ceramic-filled epoxy coating |
| Colours | Blue or Red |
| Mix Ratio by Volume | 3.4:1 |
| Mix Ratio by Weight | 5.6:1 |
| Mixed Viscosity | 32,000 cP |
| Pot Life @ 75°F | 40 minutes |
| Recoat Time | 4–6 hours |
| Functional Cure | 16 hours |
| Density | 1.53 g/cm³ |
| Service Temperature | Up to 177°C |
| Ideal Application Temperature | 13°C to 32°C |
| Coverage | Approximately 1.56 m²/kg at 0.38 mm thickness |
| Recommended Coats | Two thin coats |
| Coat Thickness | 8–15 mils |
| Maximum Combined Thickness with Ceramic Repair Putty | 40 mils |
Important: Always read the current product Technical Data Sheet and Safety Data Sheet before surface preparation, mixing or application.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
What Our Customers Say
See what trade professionals, contractors and customers have to say about their experience with ProTrade Warehouse.