Chemforce TED : The Efflorescence Destroyer 5L

Chemforce TED Acidic Cleaner is a highly concentrated solution formulated to clean porous materials such as stone, concrete, brick, and grout. It removes stubborn efflorescence, rust stains, grout haze, limescale, and other mineral residues while producing far less fumes than hydrochloric acid.

Benefits of TED Acidic Cleaner

• High concentration – Contains 50–60% Urea Hydrochloride for powerful cleaning action.

• Lower fuming – Delivers strong performance with much less odour compared to hydrochloric acid.

• Effective stain removal – Cleans efflorescence, grout haze, rust marks, mortar mess, soap scum, limescale, and mineral deposits.

• Additional uses – Suitable for removing fireplace soot from masonry and brickwork.

• Safer handling – Temporary skin contact does not cause immediate burns, though rinsing immediately after contact is essential.

• Low metal corrosion – Little to no impact on metals, except aluminium.

Specific Gravity: 1.21

Colour:  Clear, colourless to light straw-yellow liquid

weight: 5L

How to Use

1. 1. Read Product Data Sheet and Material Safety Data Sheet before using
   2. Wear protective gloves/protective clothing/eye protection/face protection.
   3. TEST PRODUCT ON A SMALL AREA TO CHECK ACID SENSITIVITY BEFORE FULL APPLICATION.
   4. If satisfied with test results, remove all loose dust and dirt from the surface.
   5. Apply when surface temperature is 5 to 35 °C (40 – 95 °F).
   6. Pre-wet very porous surfaces with water to prevent cleaner penetrating too deeply.
   7. TED is highly concentrated and must be diluted with clean water. Recommended dilutions:
      • Efflorescence, rust marks – 1 part TED™ to 10 parts water
      • Grout haze, limescale, soap scum – 1 part TED to 20 parts water
   8. Pour, brush or spray mixed solution generously onto surface and leave for 3 minutes.
   9. Do not allow solution to dry on surface.
   10. Clean large areas in sections.
   11. Rub with a white nylon scrub pad, or similar, to clean the surface.
   12. TED  is highly acidic and must be neutralized before rinsing: Use Oxitec-M™ or dissolve 1 cup of bicarbonate of soda in a bucket of water. Pour, spray over the entire surface and leave for minimum 3 minutes.
   13. Rinse surface thoroughly several times with clean water.

NOTE: TED is highly acidic and will etch acid sensitive materials such as marble, limestone, travertine and onyx. Concrete should be wet before applying TED and neutralized immediately afterwards to minimize damage.

Precautions

• Do not handle until all safety precautions have been read and understood.
• Wear protective gloves/protective clothing/eye protection/ face protection.
• Avoid breathing dust/fume/gas/mist/vapours/spray.
• Wash thoroughly after handling.
• Use only outdoors or in a well-ventilated area.
• If on skin: Wash with plenty of soap and water.
• If inhaled: Remove to fresh air and keep at rest in a position comfortable for breathing.
• If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• Call a POISON CENTER or doctor/physician if you feel unwell.
• Specific treatment is advised - see first aid instructions.
• If skin or eye irritation occurs, get medical advice/attention.
• Take off contaminated clothing and wash before re-use.

Shop Chemforce products at ProTrade Warehouse with fast Australia-wide delivery and excellent value. Bulk order discounts available – contact us for details

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.