NuCourt Roll Coat
NuCourt Roll Coat is a water-based acrylic coating explicitly developed for short-nap roller applications to asphalt and concrete sports surfaces. Used in conjunction with the NuCourt Range of products as a complete finishing system, NuCourt Roll Coat will provide a long-lasting, resilient surface that is non-slip. NuCourt Roll Coat is manufactured in black, white and six industry standard colours. Custom tinting is available upon request for large-scale projects.
Typical Applications Include:
- Tennis Court Surfaces
- Sport Surfaces
- Concrete Surfaces
- Asphalt Courts
Benefits
- Low VOC
- Specifically designed for hard sports surfaces
- Developed for roller application
- UV stable and non-fading
- Can be line marked with NuCourt Line Marking
- Suitable for all weather conditions
- Excellent protection against bacteria and mould
- High build, smooth surface coating
Appearance
Coloured viscous liquid
Coverage Rate
4.5 m²/L
Suitable Surfaces
Application
Preparation:
The surface must be clean and free of all lichen, moss, grease, oil, chewing gum, silicon and other foreign matter.
Moss and Lichen Contamination: Use Nutech Hypo per the relevant TDS, allowing the surface to dry thoroughly after complete preparation.
Grease & Oil: Use EcoSafe Degreaser in accordance with the relevant TDS.
Use a high-pressure water blast (> 2500 PSI) to remove any grease, oil, food, or stains. Allow to dry thoroughly.
Repair: All non-structural cracking and any surface damage. Nutech Paint recommends seeking professional advice regarding any structural or drainage issues prior to the commencement of works.
Any ponding of water deeper than 20mm will require patch repairing.
Where the existing coating has been removed, patch repair the surface using NuCourt Fill Coat in accordance with the relevant TDS.
For preparation specific to concrete or asphalt surfaces, refer to the TDS.
Application:
First Coat: Apply one coat of NuCourt Roll Coat
Method:
- Pour a windrow of NuCourt Roll Coat parallel to the court edge.
- Apply even downward pressure and avoid leaving thick film sections on either side of the applicator.
- Walking in the direction of the windrow, spread with the applicator to obtain an even cover, then reverse direction.
- Always maintain a wet edge.
- Allow the coat to dry.
- After the coating is dry, inspect the surface and scrape or grind off any excess lumps or irregularities.
Second Coat: Apply NuCourt Roll Coat in the above-described method.
Top Coat Pre-Existing Surfaces:
In accordance with the methods described in the TDS.
For Line Marking:
Refer to NuCourt Line Marking.
Download Datasheets For detailed application information.
Â
Colour Accuracy Disclaimer:Â We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
