 
         
        Nutech NuPrime Primer is the Ultimate Solution for Powdery Roof Tiles and Concrete Surfaces. By applying NuPrime as a primer, you can effectively combat the powdery nature of roof tiles, creating a solid foundation for subsequent coatings. This advanced formula enhances the adhesion between coats and prepares the surface for NuTech’s wide range of durable exterior roof coating topcoats.
Nutech NuPrime is also recommended for use as a primer under the NuCourt range for concrete sport surfaces. Whether you’re designing a basketball court, tennis court, or any other sports facility, NuPrime is your go-to primer. Its exceptional adhesion properties ensure that the subsequent coatings in the NuCourt range adhere securely to the concrete surface, resulting in a resilient and professional-grade finish.
Benefits and Features
- Fast drying
- Promotes inter-coat adhesion
- Weatherproof
- Easy application
- Excellent penetration through oxidised powdery tile surfaces
- Stable non-yellowing coating
- Provides excellent protection against bacteria and mould
Application Conditions
- Only apply between 10°C and 30°C ambient air temperatures
- Ensure no surface moisture is present prior to application
- Consideration must be given to other climatic conditions such as wind and relative humidity
- Failure to observe these provisions may affect coating adhesion
- Avoid mist-spraying Nu-Prime on hot tiles to prevent flash surface drying
Suitable Surfaces: Concrete Roof Tiles
Specifications
| Appearance | Milky white viscous liquid | 
| pH | 8.5 – 9.5 | 
| Film Forming Temperature | 10°C | 
| Coats Required | 1 Coat | 
| Touch Dry | 30 Minutes | 
| Full Cure | 2 Hours | 
| VOC Levels | 12 g/L | 
| Ambient Application Temperature | 10°C – 30°C | 
| Coverage Rate | 4 m²/L | 
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
