Stellmann Non-Slip Clear is a water-based, dual component polyurethane coating specifically formulated to eliminate the risk of slipping on a wide range of substrates. It is a premium quality, transparent coating, UV-resistant, flexible and durable. Stellmann Non-Slip Clear has excellent adhesion to a wide range of surfaces in combination with Stellmann Clear Primer. Surfaces: tiles, ceramics, natural and engineered stone, marble, fibre cement, sandstone, terracotta, bluestone, slate, and other porous stone materials, acrylics, PU, epoxy, timber, metal and glass. The coating is touch dry in 60 minutes and trafficable in 12 hours (light pedestrian traffic).
Features
• Dual-component polyurethane coating
• Premium quality, water-based system
• Transparent,UV-resistant, and non-yellowing
• CSIRO Certified
• VOC-free
• Easy to apply by roller
• Excellent chemical and mechanical resistance
Properties
Gloss Level: Satin when applied by roller, Matt when spray applied
Colour: transparent
Number of coats: 1
Voc level: Less than 0.5% by weight
Touch Dry: 60 minutes
Where to Use P4 Slip Rating
P4 is ideal for shoes on and outdoor wet zones.
- Outdoor entry areas, walkways, external ramps including sloping driveways, foot paths, etc.,
- external carpark areas, pedestrian crossings, balconies, verandas, courtyards, serving areas,
- behind bars in hotels and pubs, swimming pool surrounds and communal shower rooms.
For residential barefoot bathrooms or showers, Non slip clear pro P3 is the better choice.
Whats In the Non slip clear pro P4 Box
15M² Pack
- 900gm Stellmann Non-Slip Part A
- 180gm Stellmann Non-Slip Hardener Part B
- Stellmann Clear Primer for superior adhesion
- Roller Sleeve
60M² Pack
- 3.6KG Stellmann Non-Slip Part A
- 0.72KG Stellmann Non-Slip Hardener Part B
- Stellmann Clear Primer
- Roller Sleeve
165M² Pack
For large-scale clear non-slip applications in Sydney, this 165m² pack offers the bulk materials you need:
- 10KG Stellmann Non-Slip Part A
- 2KG Stellmann Non-Slip Hardener Part B
- Stellmann Clear Primer
- Roller Sleeve
Stellmann Prep & Maintenance Cleaner sold separately, required to achieve best results.
Mix ratio:
5 to 1. Stellmann Non-Slip Clear Part A = 5 and Part B is 1.
Calculation: multiply the amount of Part A in the mixing cup by 0.2. The result is the amount of Part B that needs to be added. Alternatively, multiply the amount of Part A in the mixing cup by 1.2. The result is the total amount that needs to be reached by adding Part B. Example: 200 grams of Part A is added in a mixing cup. Add 40 grams of Part B. Calculation method 1: 0.2 x 200 = 40 grams. Method 2: 1.2 x 200 = 240.
How to Apply
-
Clean: Prep your surface using Stellmann Prep & Maintenance Cleaner — removes oils, soap, and grime for maximum grip.
- Prime: Apply the included primer with a sponge or mop.
- Coat: Roll on Non-Slip Clear PRO evenly. Dries in 12 hours — ready to use, fully P4-safe.
IMPORTANT PRECAUTIONS AND LIMITATIONS
Please carefully read the Data Sheet, Material Safety Data Sheet, and any precautionary labels on the containers before use.
- Do not apply in exterior situations when rain threatens.
- Do not apply when relative humidity is above 85% or is likely to go above 85% shortly after application.
- Do not apply to areas with faulty waterproofing or high moisture content.
- For outdoor applications, it is recommended to start in the later morning.
- Do not start application in direct sun when warmer than 30 degrees Celsius; consider spray application (HVLP) in these conditions.
- Avoid application in the late afternoon (check humidity and weather forecast).
- Practical spreading rates will vary depending on application method, surface roughness, and porosity.
- Suitable for application over bare substrate and water-based coatings.
APPLICATION OF STELLMANN NON SLIP TO METALS
Applying Stellmann Non-Slip coatings to metals, such as steel and aluminium, can be challenging due to their inherently smooth surfaces and limited bonding for coatings. To enhance adhesion, the use of a primer is essential, providing a chemical or mechanical bond between the coating and the metal. However, to achieve a similar adhesion of our coating to metals as to surfaces such as tiles, concrete, vinyl, or marble, it is recommended to sand the surface first.
Surface Preparation
Before applying Stellmann Non-Slip coatings to metal surfaces, it is recommended to sand the surface with a 400 grit pad to increase the surface area and improve primer and coating adhesion.
Primer Application
A standard Stellmann Clear Primer is a water-based primer is suitable for use on metals. Alternatively, the Mipa Coatings 1K Haftpromoter Primer, a single-component, solvent-based option, is also effective and available from Mipa Australia.
Application
Refer to the Stellman Non-Slip Clear PRO Technical Data Sheet for the installation instructions.
Galvanised Steel / Raised Profiles
Please be aware that galvanized steel and other metals with raised profiles are more susceptible to accelerated wear. The sharp edges and points on these raised areas, combined with their limited surface area, create higher levels of mechanical stress and abrasion compared to flat surfaces. This additional stress can result in faster wear and deterioration of the coating, as raised profiles are more exposed to friction, impacts, and external elements like weathering or abrasive contact.
Download the technical datasheet for step-by-step application guidelines and review all available documents. Still unsure which anti-slip coating is right for you? Contact us today!
