Double Garage Epoxy Floor Package - 2 X Flowcoat OP 10kg Epoxy Coating Package
Includes two 10kg Flowcoat OP kits to cover a standard double garage
- Hard-wearing epoxy coating with a distinctive orange-peel textured finish
- Suitable for garages, workshops, warehouses and commercial concrete floors
- Available in Light Grey or Bridge Grey for easy colour selection
Flowcrete Flowcoat OP Double Garage Epoxy Floor Package – 2 x 10kg
PRODUCT LAUNCH SPECIAL – $499
Coat approximately 50m² with this Flowcrete Flowcoat OP epoxy flooring package. It includes 2 x 10kg Flowcoat OP kits in your choice of Light Grey or Bridge Grey, producing a hard-wearing orange-peel textured finish.
In stock and ready for pickup or delivery. Special package pricing is available while stock lasts.
What's Included
- 2 x 10kg Flowcrete Flowcoat OP epoxy kits
- 20kg total of pre-tinted epoxy coating
- Choice of Light Grey or Bridge Grey
- Professional-grade, low-VOC epoxy coating
- Characteristic orange-peel textured finish
Package price: $499 — normally $580 when purchased separately. Save $81 with this package.
Need more coverage? Additional 10kg kits are available for $245 each when purchased with this package. Contact us for a quote.
Coverage
The 20kg package provides approximately 50m² when applied as a standard two-coat Flowcoat OP system at approximately 0.2kg/m² per coat.
- First coat: approximately 0.2kg/m²
- Second coat: approximately 0.2kg/m²
This application produces the characteristic orange-peel finish of Flowcoat OP. Actual coverage can vary depending on the concrete surface, preparation, porosity, application method and wastage.
Important: Higher-build or slip-resistant systems may require additional material.
Suitable For
- Double garages
- Residential garages
- Home workshops
- Automotive workshops
- Commercial workshops
- Warehouses
- Industrial areas
- Maintenance and service areas
Before You Start
The concrete must be sound, clean, dry and free from laitance, dust, oil, grease and other contamination.
Mechanical surface preparation such as diamond grinding or suitable shot blasting is recommended to remove contamination and provide the required surface profile.
Primer is not included. Flowprime AU may be required where specified, including certain porous substrates. Follow the manufacturer's current technical data sheet for primer requirements and application.
Any cracks, damaged areas or surface defects should be repaired with a suitable compatible repair product before coating.
How to Apply
- Prepare the concrete: Mechanically prepare the floor and thoroughly vacuum to remove dust and loose material.
- Repair cracks and defects: Fill cracks, holes and damaged areas with a suitable compatible repair product. Allow repairs to cure fully before coating.
- Check moisture: Make sure the substrate meets the manufacturer's moisture requirements before coating.
- Prime if required: Apply Flowprime AU only where needed, such as on very porous concrete. Follow the manufacturer's mixing and recoat requirements.
- Mix Flowcoat OP: Stir Base A to redistribute any settlement, then add Hardener B.
- Mix thoroughly: Use a slow-speed drill with a suitable helical mixer for approximately 90 seconds. Avoid excessive air entrainment.
- Add Xylene if required: Where required by the application conditions, add approximately 2–7% Xylene and mix for a further 30 seconds.
- Apply the first coat: Apply at approximately 0.2kg/m² using the appropriate roller and/or squeegee.
- Apply the second coat: Apply at approximately 0.2kg/m² within the manufacturer's specified overcoat window.
- Allow to cure: Keep the floor protected during curing and do not allow traffic until the coating has sufficiently cured.
Download datasheets from documents tab for full product information and application instructions.
Recommended Equipment
- 10–12mm nap roller
- Slow-speed drill with helical mixer
- Squeegee
- Industrial vacuum, Floor Grinder
- Digital scales where required
- Spike shoes
Important Application Conditions
- Application temperature: 5°C–35°C
- Keep the substrate at least 3°C above dew point
- Maximum overcoat time at 20°C: 24 hours
- Working time is approximately 20 minutes at 20°C
- Working time decreases as temperature increases
- Maintain adequate ventilation during application
- Protect the finished floor from water during the initial curing period
- Flowcoat OP is not UV stable and may discolour with UV exposure
Curing Times
| Temperature | Foot Traffic | Vehicle Traffic | Full Chemical Cure |
|---|---|---|---|
| 10°C | 48 hours | 96 hours | 12 days |
| 20°C | 24 hours | 72 hours | 7 days |
| 30°C | 18 hours | 48 hours | 6 days |
Lower temperatures will increase curing times.
Need a UV-Resistant Finish?
Flowcoat OP is not UV stable and may discolour when exposed to sunlight. For areas exposed to direct sunlight or outdoor conditions, use a suitable UV-resistant clear topcoat over the completed Flowcoat OP system.
Key Product Features
- Hard-wearing epoxy floor coating
- Distinctive orange-peel textured finish
- Low-VOC formulation
- Good abrasion resistance
- Good chemical resistance
- Seamless and easy to maintain
- Suitable for commercial and industrial environments
Important
This package includes the 2 x 10kg Flowcoat OP epoxy kits only. Primer, repair products, slip-resistant aggregate and application equipment are not included.
Always follow the manufacturer's current technical data sheet and system requirements before application.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
What Our Customers Say
See what trade professionals, contractors and customers have to say about their experience with ProTrade Warehouse.