PaveCoat AntiSlip Mix In
AntiSlip Mix In has been developed to increases the friction coefficient of all Nutech single pack floor coating systems, reducing the slip potential under both wet and dry conditions. As a mix in additive, it has been designed for use in the Nutech single pack sealer and coating systems such as; PaveCoat, PaveCoat Petrol Resistant, PaveCoat H2O and EPiC Industrial Enamel.
AntiSlip Mix In when applied in the correct methods, will achieve a Pendulum Classification of P2 or P3 and meets AS4586 & AS4663.
Features:
- Substantially improves safety of sealed surfaces in wet and dry conditions
- Simple mixing to achieve a uniform distribution
- Flexible and scuff resistant
- Less abrasive surface to reduce personal injury due to falls
Provisions:
- AntiSlip Mix In IS NOT suitable for inclined or steep surfaces.
- NOT RECOMMENDED for use in 2 pack concrete finishing systems OR in AquaStop or Silicon Sealer.
- Nutech recommends the use of PolyCryl and the addition of AntiSlip Cast On to achieve up to an R12 or P5 slip rating. Refer to the relevant TDS for further information.
Appearance:
Dry white powder
Typical Applications:
Ideal around wet areas, pools, factory loading docks, access ramps (with less than 15 degrees incline), stairs, entrance foyers, public pedestrian and vehicle areas.
Coverage / Spread Rate:
1 to 2 jars per 20L (400g to 800g)
Recommended Substrate:
All painted surfaces that require a non-slip textured finish.
Download Datasheet for the application procedures.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
