EPiC PolyCryl
EPiC PolyCryl is a high-strength, solvent-based, functional acrylic 2-pack coating that protects concrete, timber, masonry and primed metal surfaces. EPiC PolyCryl has been developed to provide excellent interior and exterior durability with operational benefits of hardness, abrasion and scuff resistance for various applications.
EPiC PolyCryl provides superior protection against petrol, oil, fatty oils, acid, and alkalis and is ideally suited as a sacrificial anti-graffiti finish.
Benefits
- Excellent interior and exterior durability
- Isocyanate free
- Hard-wearing
- Excellent adhesion and hardness
- High resistance to corrosion and abrasion
- Impervious to water and moisture
- Easy application
Appearance
Clear or Coloured Viscous Liquid
Coverage Rate
8 – 10 m²/L
Suitable Surfaces
- Concrete Slabs
- Metals Surfaces
Application
For detailed substrate preparation and application steps, please download the PolyCryl application guide.
Equipment Type
Do not store the mixed product in spray equipment to avoid damage.
Surface Preparation
Prepare bare concrete surfaces using EcoSafe Etch or Nu-EcoSafe Ultra Etch following the recommendations in the relevant TDS. Allow the surface to dry thoroughly before application.
Mixing
Mixing 3 Parts A to 1 Part B (single 2-pack kit). Mix using a drill mixer; hand stirring is not sufficient. Leave to stand for 10 minutes before use to allow full activation.
Do not use after the pot life has expired (8 hours).
Thinning
For spray application, use 10% – 15% with X-5 Solvent. Do not thin for brush or roller application.
Bare concrete and masonry surface thin 20% – 25% with X-5 Solvent for first coat application for increased penetration and adhesion.
Application
- Roller or brush: Apply two even coats, observing minimum film thickness recoat and dry times as outlined in the TDS
- Spray: Apply 2-3 even coats, observing minimum film thickness, recoat and dry times as outlined in the TDS
Drying and Curing
EPiC PolyCryl should be touch dry and able to be recoated after 4 hours. For a full cure, allow drying for 7 days.
Clean Up
Clean all surfaces and equipment using X-5 Solvent.
Download Datasheet for full application details.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
