EPiC Industrial Enamel
NuTech Industrial Enamel is a modified single-pack urethane enamel with a high gloss finish. It can be applied to various surfaces, including Concrete, Timber and Metal Surfaces primed with a suitable Metal Primer. EPiC Industrial Enamel is for general purpose use.
Benefits
- NuTech EPiC Industrial Enamel has excellent durability for a single-pack coating.
- It has excellent corrosive and abrasive properties.
- It is hard-wearing when cured and has ideal Gloss and Colour retention.
Appearance
White and coloured liquid
Coverage Rate
8 – 10 m²/L
Application
Preparation
All surfaces must be free from Rust, Oil, Grease, and all other surface contamination. Bare concrete should be acid etched to increase surface porosity.
Application
Brush, roller, spray. Stir thoroughly before use. Use a good-quality brush and a good-quality solvent-resistant sleeve. Spray application will depend on the type of finish required.
Thinning
Use thin 10% – 15% Nutech Mineral Turps for spray application. Do not thin for brush or roll applications. For bare concrete, thin the first coat by 20% – 25% using Nutech Mineral Turps.
Drying and Recoating
Industrial enamel will touch dry after 25 minutes (at 25°C) and can be recoated within 4 hours or after 24 hours.
A hard cure will be achieved after seven days.
Clean Up
NuTech Mineral Turps
Suitable Surfaces
- Concrete Slabs
- Metal Surfaces
Download Datasheet for full information.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
