Sikafloor 94 Epoxy primer & Binder Resin

Sikafloor 94 100% Solid Low Viscosity Epoxy Primer

Name: Sikafloor 94 100% Solid Low Viscosity Epoxy Primer
Brand: Sika
SKU: SF-94-30
Price: 630.0 AUD
Availability: InStock

two component, low viscosity, 100% Solid Epoxy Primer and Binder resin system

$630.00 - $1,300.00

$630.00 Inc GST

$630.00 - $1,300.00 Inc GST

$630.00 Inc GST

Quantity

Product Description

Low viscosity, solvent free epoxy Primer and general purpose Binder resin. Sikafloor 94 is a two component, low viscosity, 100% Solid Epoxy Primer and Binder resin system

Uses

Primer for concrete surfaces with Sikafloor resin systems.
Binder resin for Epoxy mortar Sub-fill mortar screeds.
Binder for epoxy Coving mixes.
Flow and scratch coat layering prior to Sikafloor systems.

Advantages

Low viscosity
Excellent substrate penetration
Very low odour - VOC
Excellent binder for mortars
Fast to cure
Can be accelerated with Sikafloor Booster
Economical
Good Chemical Resistance

Colour

Yellowish transparent

Packaging

Available in proportioned 30 kg
Part A+B

Application Info

Mixing ratio
Part A Part B = 2 :1 (by Mass and Volume)

Ambient air temperature
Application range recommended +5 to +30 Degrees C

Pot Life
10 Degrees C - 30 mins.
20 Degrees C - 20 mins.

Waiting time to overcoating
10 degrees C 15 hours
20 degrees C 8 hours
Note: Waiting times are approximately halved with the addition of Sikafloor Booster

Consumption
Primer
CSP 2-3 profile 5-6m2 L approx.
CSP 4-5 profile 2-3m2 L approx.

Mortar
Range of 1:5 to 1:8 mixed litre of Sikafloor®-94 to kg blended silica sands

Mixing
Part A and B to be mixed the correct ratio for a minimum of 2 minutes

Application
Primer
Roll product evenly on and into the surface.
If the product is completely absorbed then an additional coat should be applied within 24 hours.

Mortar
When used as a binder in Profiling screeds or Coving mixes, the substrate should also be primed with Sikafloor®-94

Documents

Sika's SIKAFLOOR 94 Data Sheets

Sikafloor 94 Product Datasheet

Sikafloor 94 Safety Datasheet - Part A

Sikafloor 94 Safety Datasheet - Part B

Frequently Asked Questions

Disclaimer

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.