Nutech PaveCoat Same Day Cure & Seal Sealer 20L

Nutech PaveCoat Cure & Seal – Same Day Concrete Sealer

PaveCoat Cure & Seal is a solvent based, acrylic penetrating concrete sealer designed for “same day” application. PaveCoat Cure & Seal can be applied directly to green curing concrete which will assist in water retention and improve cure strength.

Features

• Improves the curing efficiency of concrete
• Reduces concrete salt 'efflorescence' on coloured surfaces
• Provides greater wear resistance and durability
• Improved colour retention
• Prevents surface dusting
• Suitable for a range of smooth and rough surfaces
• Excellent surface penetration
• Ideal for faux brick, without additional thinning

Appearance

Clear viscous liquid

Coverage / Spread Rate

5m²/L

Note: Coverage will depend on the porosity and roughness of the surface. To maximise performance do not over spread.

Recommended Substrates

• All types of concrete
• Footpaths
• Paving
• Driveways
• Tilt slab construction
• Asbestos and cement sheeting
• Slate flooring
• Concrete roof tiles
• Pattern paving
• Stamped and slate impression paving
• Stencil paving
• Spray paving

Note: 

PaveCoat Cure & Seal is recommended for NEW or OLD UN-COATED concrete surfaces only.

Powdery or Soft Concrete: DO NOT Etch or Acid Wash as this may damage the surface. 

Provisions

• PaveCoat Cure & Seal IS NOT RECOMMENDED for pre coated concrete floors.
• PaveCoat Cure & Seal will penetrate the fresh concrete surface and should not provide a gloss finish.
• Should a gloss finish be required, apply one additional coat of PaveCoat Clear.
• Refer to the relevant PaveCoat TDS for further application details.
• If in doubt, contact Nutech Paint for further recommendations.

Refer to the datasheet for full information.

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.