Skip to content

UltraKote UltraGuard 95 Polyaspartic Floor Coating Clear

high solids, non-yellowing, low voc Polyaspartic floor coating system.

Original price $400.00 - Original price $400.00
Original price
$400.00 Inc GST
$400.00 - $400.00 Inc GST
Current price $400.00 Inc GST
Request a quote

UltraGuard 95 Clear Polyaspartic Coating System

UltraKote’s UltraGuard 95 Polyaspartic is a high-performance, two-component clear polyaspartic floor coating designed to combine decorative appeal with exceptional durability. Engineered with advanced aliphatic chemistry, it delivers outstanding UV stability and colour retention—far exceeding traditional epoxy coatings in sunlight resistance.

With a simple 1:1 mix ratio and extended pot life, UltraGuard 95 is easy to apply using standard flooring tools, making it ideal for both commercial and residential environments.

1 Litre Colour Packs (Grey, Black, and White) are available separately at $70.00 each.

Features & Benefits

  • UV Resistant – Maintains integrity under direct sunlight.
  • Non-Yellowing – Colour stability in outdoor and high-light areas.
  • High Solids (95%) – Achieves up to 300µm DFT in a single coat.
  • Chemical Resistance – Withstands most household and commercial chemicals.
  • Excellent Slip Resistance – Enhances safety on coated surfaces.
  • Flexible in Cold Conditions – Retains elastomeric properties at low temperatures.
  • Low Odour & Low VOC – Safer for indoor application.
  • Custom Finish Options – Compatible with anti-slip powders and decorative flakes.

Typical Uses

UltraGuard 95 is ideal for upgrading and protecting concrete floors, countertops, and other hard surfaces. Perfect for:

  • Garage floors
  • Warehouses
  • Showrooms
  • Driveways & patios
  • Aircraft hangars
  • Mechanical workshops
  • Car parks
  • Hospitals & shopping centres
  • Commercial kitchens & food courts
  • Salons & lobbies

Surface Preparation

General: Ensure the surface is stable, dry, clean, and free from dust, grease, oil, and loose material.

New Slabs:

  • Moisture content must be within acceptable limits.
  • Concrete must be cured for at least 60 days.
  • Mechanically grind smooth-finished slabs for proper adhesion.

Old Slabs:

  • Remove old coatings by grinding to 60–100 grit.
  • Clean and prepare the surface to be dust-free and oil-free.
  • If primer is required, please ensure test area is conducted to ensure compatibility with primer.
  • If applying onto substrates such as vinyl, terrazzo, or polished concrete it is recommended to test adhesion.
  • It is always recommended to check adhesion to substrate before application.

     

Note: All substrates should have a mechanical key before application of the first coat. It’s recommended to at least finish at 60–80 grit if direct to concrete or 100–150 grit if coating on top of a coating system.

Application Conditions

  • Do not apply UltraGuard 95 when ambient and/or surface temperature is below 0°C or above 30°C.
  • Do not apply UltraGuard 95 if relative humidity is more than 80%.
  • Do not apply UltraGuard 95 if moisture content of substrate is more than 5%.

Optimum application conditions are between 20°C and 25°C with a relative humidity of 35% to 50%.

Application Method

  1. Mix Part A and Part B at a 1:1 ratio by volume.
  2. Avoid excessive aeration—use hand paddle mixing.
  3. Apply within 30–60 minutes of mixing.
  4. Pour onto the floor in ribbons, spread with a 10–12 mm nap mohair/microfibre roller or T-bar applicator.
  5. Brush edges with a bristle paint brush.

Coverage

  • 6–10 m² per L of mixed material
  • Achieves 100–300µm dry film thickness (depending on surface porosity)

Dilution

Up to 7% Xylene by volume (must be moisture-free)

Recoating

  • Recoat after 5–6 hours at 25°C (35% RH)
  • Maximum recoat window: 18 hours
  • If exceeded, abrade surface with 100–180 grit before recoating

Decorative Flake Option

  • Broadcast flakes into the first coat within 1.5 hours of application at 25°C (35% RH).
  • Once dry, remove excess flakes and seal with a final clear coat.

Clean-Up

  • Clean tools immediately with moisture-free Xylene before curing.

Additional Information

UltraGuard 95 is trusted in demanding environments for its:

  • Rapid installation times
  • UV stability & non-yellowing properties
  • Resistance to weathering and corrosion
  • Decorative versatility with flakes and quartz chips
  • Suitability for both indoor and outdoor concrete

Commonly applied in garages, warehouses, showrooms, workshops, driveways, hangars, and food preparation areas, UltraGuard 95 ensures a long-lasting, professional finish with reduced downtime compared to traditional coating systems.

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
W
Wayne

Used UltraGuard 95 on my shed floor. No weird smell and super hard after curing. Would recommend if you want something fast

M
Moey

this clear coat is solid went down quick looks great and the floor looks bulletproof now easy to clean and no stress with cars rolling in and out good stuff

C
Carlos

this product was great the finish result came out crystal clear and no bubbles or haze up and what i really liked was the fast result it was really worth it
as long as you dont take to long once its mixed you would be fine

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare