SOUDAFIX VE400-SF is a two-component anchoring resin for the pressure-free securing of threaded rods (ETA: M8-M30), studs, reinforcement bars (ETA: Ø8-Ø32), threaded collars, profiles etc in various solid and hollow materials, such as cracked and uncracked concrete, solid brick, hollow brick, porous concrete, natural stone (see remarks), plasterboard walls, etc… Fire resistant class of F120 and has a high resistance to chemicals.
Features & Benefits
- High compression strength
- High fire resistance F120
- Fast cure
- Wide application area, even in wet drill holes, under water and at temp. as low as –10°C
- Styrene free (low odour)
- Cartridge re-usable by simply exchanging static mixer
- Watertight and impermeable fixing
- High chemical resistance
Applications
- Securing of heavy loads in solid and hollow building materials
- Pressure free anchoring even close to edges
- Can be used as repair mortar
Packaging
Colour: dark grey after mixing
Cartridge: 380 ml for use with special two-component gun
Shelf Life
18 months in original packaging. Store at cool and dry place at temperatures between +5°C en +25°C.
Note: There is a risk of staining on porous substrates such as natural stone. On such substrates a preliminary compatibility test is recommended.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
