Skip to content

Sikafloor 24 Purcem - 15.2kg kit

Original price $180.00 - Original price $180.00
Original price
$180.00 Inc GST
$180.00 - $180.00 Inc GST
Current price $180.00 Inc GST
Choose a Color
Request a quote

Fast Curing, Food Grade Approved Polyurethane Floor Coating 

Sikafloor-24 PurCem is a water-based, coloured polyurethane hybrid floor coating approved for food-grade environments. This fast-curing system can be applied to create a smooth or textured, matt, impervious, and hard-wearing surface, typically at a thickness of 1.5–3.0 mm. It's ideal for new floors or rapid refurbishment of existing resin-based floors in various industrial and commercial settings.

Uses:

  • Food and Beverage processing areas (dry or wet)
  • Food facilities (re-surfacing/refurbishing existing seamless floors)
  • Engineering process areas
  • Warehouse logistics
  • Manufacturing facilities
  • Warehouse floor refurbishment

Characteristics / Advantages:

  • Fast cure - short downtime
  • HACCP - Food grade approval
  • Good chemical resistance
  • High mechanical resistance
  • High glass transition point
  • Non-tainting / odourless
  • Low VOC
  • Can be applied to substrates with high moisture content (7 days old or mature damp concrete or 10% moisture pbw)

Sustainability:

  • LEED® Rating: Low Emitting Materials - Paints and Coatings (VOC ≤ 50 g/l)
  • VOC - Australian Standards ASTM D3960 - Green Star

Product Information:

  • Composition: Water-based polyurethane cement hybrid
  • Packaging (Full Kit):
    • Part A (neutral): 2.80 kg plastic container
    • Part B: 3.00 kg plastic container
    • Part C: 9.00 kg plastic bag
    • Part D Pigment: 0.4 kg plastic tub (if coloured)
    • Total Ready to Mix Unit: 15.2 kg (8.5L)
  • Shelf life: Part A (9 months), Part B (6 months), Part C (6 months - protect from humidity), Part D (9 months) from date of production
  • Storage conditions: Dry conditions between +5 °C and +30 °C in original, unopened packaging
  • Appearance and colour: Part A (light beige liquid), Part B (brown liquid), Part C (natural grey powder), Part D (colour pack as per list below for part A neutral)

Standard RAL colours: Traffic Grey 7042, Dusty Grey 7037, Curtain Call S46B9, Oxide red 3009, Sky Blue 5015, Beige 1001

Available on request:    Grass Green 6010, Maize Yellow 1006,

  • Density (Mixed): ~ 1.75 kg/l ± 0.03 (at +20 °C)

Application Information:

  • Mixing ratio: Mix full units only
  • Consumption: ~1.75 kg/m²/mm
  • Layer thickness: Scratch coat (0.5-1.0mm), Smooth system (1.5-2.0mm), Textured system (2.0-3.0 mm)
  • Ambient air/Substrate temperature: +10 °C min. / +40 °C max.
  • Relative air humidity: 85 % max.
  • Substrate moisture content: Can be installed on substrates with higher moisture content (visibly dry, min 1.5 N/mm² pull-off strength)
  • Pot Life:
+10 °C: ~ 35–40 minutes
+20 °C: ~ 22–25 minutes
+30 °C: ~ 15–18 minutes
+35 °C: ~ 12–15 minutes


Important Considerations:

  • Do not apply to PCC mortars that may expand due to moisture.
  • Ensure good ventilation during application in confined spaces.
  • Protect freshly applied coating from damp, condensation, and direct water contact for at least 24 hours.
  • Do not apply to cracked or unsound substrates.
  • Allow a minimum of 48 hours after application before placing in service near foodstuffs.
  • Discolouration may occur with UV exposure but does not affect performance.
  • Avoid scrubbing with water for the first three days after application.

Application Instructions:

Substrate Quality / Pre-treatment: Surface must be clean, dry, free of contaminants, and have a pull-off strength ≥ 1.5 N/mm². Remove all dust and loose material. Test area recommended if unsure.

Mixing: Premix Part A (with Part D for colour). Add Part B and mix for 30 seconds. Gradually add Part C (aggregate) using a double paddle mixer for at least 2 minutes. Scrape down sides and bottom to ensure complete mixing.

Application: Apply as a scratch coat with a steel trowel or as a body coat with a toothed trowel, pin screed, or steel trowel. Remove air with a spike roller. For textured floors, broadcast aggregate to excess and remove after hardening. Apply Sikafloor 31 or 33 PurCem finish coats as needed. Follow application guidelines strictly.

Cleaning of Equipment: Clean all tools with Thinner C immediately after use. Cured material can only be removed mechanically.

Get unbeatable trade prices and fast nationwide shipping on all Sika products. Pick up your order from our store, Sika Wetherill Park in Sydney, or any Sika warehouse nationwide. 

 

water-based, coloured polyurethane hybrid floor coating approved for food-grade environments

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare