Solutions Sealers Natural Clean 5L Green

Natural Clean is a neutral PH cleaner which will not damage sealed or unsealed surfaces. Being a concentrate you can clean up to 1000sq metre per litre.

Suitable for:
Suitable for sealed and unsealed surfaces, internal or external Machine or general cleaning equipment

Application

• Use a clean microfibre applicator, or clean synthetic mop and bucket to apply solution.
• It can also be used in a spray container for spot cleaning.
• If a regular maintenance dilution has been used on sealed or unsealed surfaces, rinsing is not usually necessary. Stronger solutions will need to be rinsed.
• For heavier foreign deposits allow the solution to dwell for 15 minutes, agitate with a brush, stiff broom or floor scrubbing machine.
• If any residue is present after scrubbing remove with water, mop or wet vacuum and rinse

Dilution:

• For regular maintenance cleaning, 2/3 capful (10 ml) to one bucket of hot water.
• For deep cleaning heavily soiled areas that will need scrubbing up to 250ml per 10 litres of water allowing a dwell time of 15 minutes.
• If neutralizing stone or tiles, 2 capfuls (30ml) to 10 litres of water

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.