Solutions Sealers Infuse | Solvent Based Impregnating Sealer

Solutions Sealers Infuse is a premium long-life impregnating colour enhancer that not only brings out the natural beauty of your stone and concrete surfaces but also provides superior water and stain repellency. This solvent-based sealer chemically bonds to the substrate, ensuring lasting protection and enhanced appearance. With Infuse, enjoy excellent colour enhancement that revitalizes the look of your surfaces. Its advanced formula makes cleaning easier, keeping your stone and concrete surfaces looking pristine with minimal effort. Additionally, when applied correctly, Infuse will not alter the slip rating of your surfaces, maintaining their safety and functionality.

Features:

• Excellent colour enhancement
• Provides water repellency and stain protection
• Solvent-based impregnating sealer
• Chemically bonds to the substrate
• Eases cleaning of stone and concrete surfaces
• Maintains slip rating if applied correctly
• Colourless

Application:

• Use a lambswool applicator, airless sprayer (Or soft white cotton cloth for finer pored surfaces). Tape up and prepare area to be sealed. Confirm test area & product is suitable .
• Apply when surface temp is between approx. 5°- 35° C.
• Allow good ventilation and adequate air flow. Use proper PPE as per details on Safety Data Sheet.
• Apply sealer slowly with a cross direction for complete coverage.
• Avoid puddling the sealer and remove any excess INFUSE after 10 - 15mins from initial application. Allow 15 - 30mins between coats. Keep surface dry and free from traffic for 2-4 hours.
• On finer surfaces like Marble and Travertine etc: polish sealer into surface and removing excess as you go.
• Do not pour sealer directly on the surface nor allow puddling.
• The amount of coats will depend on the look required and the porosity of the surface being sealed. Generally we suggest 1 - 2 coats on an average porosity masonry surface.

CAUTION:

 On initial application, surface may be slippery for the first 24 - 36 hours. After this time a quick wash with NATURAL CLEAN scrubbing with a soft bristle broom or Polyvac with a soft pad. Check machine suitability on your surface type.

Coverage:

Visit Solutions Sealer to learn more about this product.

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.