Sikagard-552 W Aquaprimer is a one-component, water-dispersed adhesion promoting primer designed for water-dispersed polymer paint coatings. It's an environmentally friendly and water vapour permeable primer that's part of a system complying with EN 1504-2 as a protective coating.
Uses:
- Priming coat for concrete and dense mineral substrates like fibre cement, aerated concrete, gypsum, and thin renderings (e.g., Sika MonoTop-723 N, Monotop FC).
- Can also be used as a primer on firmly adhering existing water-based coatings.
- Improves adhesion of cement resurfacing mortars on concrete surfaces treated with hydrophobic impregnation.
- Suitable for protection against ingress, moisture control, and increasing resistivity (EN 1504-9 principles).
Characteristics / Advantages:
- Water dispersed - solvent-free
- Environmentally friendly
- Water vapour permeable
- Can be used as an adhesion promoter for coating or cement based resurfacing mortar
Product Information:
-
Composition: Acrylate dispersion
-
Packaging: 15 lt pail
-
Appearance and colour: Milky white liquid
-
Density (at 20 °C): ~1.0 kg/l
-
Solid content by volume: ~20 %
Application Information:
-
Consumption: ~0.10–0.12 kg/m² (8–10 m² per litre) depending on substrate absorbency.
-
Ambient air temperature: +8 °C min. / +35 °C max.
-
Relative air humidity: < 80 %
-
Substrate temperature: +8 °C min. / +35 °C max.
-
Waiting time to overcoating: Refer to the datasheet for specific waiting times based on substrate temperature (2.5 hours to 12 hours). Allow 100% longer when applying on existing coatings. Apply cement-based mortars when primer is still tacky.
Important Considerations:
- Do not apply when there is expected rain.
- Do not apply on concrete younger than 28 days.
- Do not apply a resurfacing mortar onto Sikagard-552 W Aquaprimer that has dried out - the bonding of the mortar might be impaired coating respectively.
Application Instructions:
Substrate Quality / Pre-treatment: Substrate must be dense and free from loose particles. Tensile strength > 1 N/mm². Prepare concrete (steam cleaning, water jetting, or blastcleaning; new concrete > 28 days). For thin renderings, allow 4 days curing before priming. Test adhesion of existing coatings.
Application: Sikagard-552 W Aquaprimer is ready to use; do not dilute. Shake thoroughly. Apply by brush, roller, or airless spray.
Cleaning of Equipment: Clean tools with water immediately after use. Hardened material can only be removed mechanically.
Get unbeatable trade prices and fast nationwide shipping on all Sika products. Pick up your order from our store, Sika Wetherill Park in Sydney, or any Sika warehouse nationwide.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
