Sikafloor 01 Primer - Synthetic Resin Primer - 5L

Concentrated Primer for Flooring & Tiling Systems

Sikafloor-01 Primer is a concentrated synthetic resin primer designed for pre-treating surfaces before the application of cement and gypsum-based products. This solvent-free primer seals porous concrete, enhances bond strength, and eliminates dust.

Uses:

Applied in combination with suitable materials from Sikafloor®, SikaBond®, Sikadur®, SikaTite®, & Davco® ranges. It is suitable for pre-treating various surfaces to enhance bond strength for internal and external commercial, residential, and industrial installations.

Characteristics / Advantages:

• EMICODE EC 1PLUS certified (Very Low VOC)
• BLUE ANGEL certified (Eco-friendly)
• Solvent-free
• Seals porous concrete
• Low consumption - high coverage
• Non-combustible
• Great penetration into porous concrete surfaces
• Can be applied neat over timber/wood, CFC & Scyon
• Suitable for application on subfloor heating systems
• Eliminates dust
• Versatile water dilution

Sustainability:

• Green Star VOC-SCQMD Rule 1168
• EPD according to ISO 14025 and EN 15804
• Solvent-free according to TRGS 610

Product Information:

• Composition: Synthetic resin
• Packaging: 5L plastic bottle
• Appearance and colour: Blue
• Density: 1L = 1kg

Application Information:

• Mixing ratio: 1:3 with clean cool water (refer to datasheet for substrate-specific dilution)
• Consumption: 1:3 dilution ~ 7 - 8 m² per mixed litre (average, depends on substrate)
• Ambient air temperature: +5 °C to +35 °C
• Substrate temperature: +5 °C to +35 °C
• Waiting time to overcoating: Refer to the datasheet for substrate-specific waiting times (approx. 10 mins to 24 hours per coat at 23 °C).

Important Considerations:

• Do not mix or apply Sikafloor-01 Primer in temperatures below 10°C and above 35°C.
• Sikafloor-01 Primer is not recommended as a trafficable seal coat over cement-based materials.

Application Instructions:

Substrate Quality / Pre-treatment: Concrete should be cured, sound (min. pull off 1.5 MPa), clean, dry, and porous. Timber should be clean and sanded. Refer to datasheet for specific substrate preparation.

Mixing: Mix Sikafloor-01 Primer with clean cool water at the recommended ratio (1:3 is common for porous concrete).

Application: Apply diluted primer with a soft bristle broom or long-napped roller, ensuring good penetration and film build. For very porous surfaces, a second coat is recommended. Apply neat on timber/wood, CFC & Scyon. Apply subsequent materials as soon as primer is dry (within 24 hours).

Cleaning of Equipment: Clean all tools with water immediately after use.

 Get unbeatable trade prices and fast nationwide shipping on all Sika products. Pick up your order from our store, Sika Wetherill Park in Sydney, or any Sika warehouse nationwide. 

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.