Sikafloor Level Eco 20 KG

Sikafloor Level Eco is an economical, polymer-modified cementitious levelling and smoothing compound designed for high build applications up to 75mm. It's suitable for both manual and pump application in commercial and residential projects, providing a smooth underlayment for various floor coverings.

Uses:

• Applied as an underlayment in combination with suitable materials from Sikafloor, SikaBond, Sikadur, SikaTite, SikaTile & Davco ranges.
• Suitable for pumping application over large areas.
• Levelling uneven concrete substrates up to 75mm in thickness.
• For use on new or old internal concrete substrates.

Features:

• Very Low VOC
• Non-combustible
• Green Star Certified
• High strength
• Economical levelling solution
• Simply mix & apply - No slaking or re-mixing required
• Good pot life and working time - slow setting
• Pump or manual application

Product Information:

• Composition: Polymer modified cement compound
• Packaging: 20kg Bag (48 bags per pallet)
• Appearance and colour: Grey powder
• Volatile organic compound (VOC) content: 1 Gram per litre

Technical Information:

• Compressive strength: 1 day cure – 14-15 MPa, 28 day cure – 25-30 MPa
• Flexural strength (28 day cure): 5-5.5 MPa
• Water absorption: Porous

Application Information:

• Yield: 12 litres - 4 m² at 3mm thickness
• Layer thickness: 3 - 75mm
• Mixing ratio: 3.5 - 3.8 litres of clean, cool water per 20kg bag
• Pot Life (at 23°C): 20 minutes
• Initial set time (at 23°C): 80 minutes
• Waiting time to overcoating (at 23°C): Allow 24+ hours (dependent on thickness and conditions).

Limitations of Use:

• Do not install over particleboard, hardwood, parquet, or metal. Suitable for concrete only.
• Do not apply below 10°C or above 35°C, or in hot and windy conditions.
• Protect from extreme temperatures and winds for 12 hours after application.
• Existing concrete joints must be reflected through the Sikafloor product.
• Not recommended as a trafficable surface or for sloped/wet areas or exterior applications.

Application Instructions:

Substrate Quality / Pre-treatment: Concrete should be cured, sound (min. pull off 1.5 MPa), clean, dry, and porous. Prime with Sikafloor 01 Primer or Sikafloor Level Pro Primer (for porous) or Sikafloor-14 Prep 'N' Prime (for non-porous/high moisture).

Mixing: Mix one 20kg bag with 3.5 - 3.8 litres of clean, cool water for at least 2 minutes to a lump-free consistency. Avoid part-bag mixing.

Application: Pour or pump and spread with a gauged spreader. Use a flat steel trowel for touch-ups. Ensure good airflow for drying. For a second coat ("wet-on-wet"), apply within 2-4 hours. Otherwise, re-prime and apply the next day.

Cleaning of Equipment: Clean tools with warm water and detergent while wet.

 Get unbeatable trade prices and fast nationwide shipping on all Sika products. Pick up your order from our store, Sika Wetherill Park in Sydney, or any Sika warehouse nationwide. 

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.