Fast-Acting Cementitious Mortar for Stopping Leaks
Sika Plug is a chloride-free, ready-to-use powder based on high alumina cement that quickly sets into a plugging mortar when mixed with water. It's designed for rapid water-stopping and leak sealing in various substrates.
Uses:
- Rapidly sealing water leaks in concrete, mortar, and brickwork.
- Pre-treatment to the installation of the Sikalastic 1K cementitious waterproofing system.
Characteristics / Advantages:
- Easy to use - just add water.
- No special equipment required.
- Rapid setting and high early strength gain.
- Excellent adhesion to mineral substrates.
- Rapid water-stopping capacity and hydraulic resistance.
- No cracking and very low shrinkage.
Product Information:
-
Composition: High Alumina cement
-
Packaging: 10kg plastic bucket
-
Appearance and colour: Grey Cement powder
-
Density (mixed approx.): 2.0 kg/litre
Application Information:
-
Mixing ratio (approx. by mass): 3 parts powder : 1 part water
Application Instructions:
Substrate Quality / Pre-treatment: Concrete, mortar, brickwork should be sound, clean, and free from contaminants. Steel/iron should be clean and rust-free. Roughen the leak area and create a "V" shape if possible. Porous substrates must be pre-soaked.
Mixing: Due to rapid setting, mix only small quantities at a time. Quickly and thoroughly mix the powder and water in a suitable container to a workable consistency. Use only the amount that can be immediately applied by gloved hand or trowel.
Application: Firmly work the mixed mortar into the leaking crevice, V-cut, or joint. Hold in place until sufficiently hard. Strike off flush if desired. Repeat until the leak is stopped. For high water pressure, a timber plug may be used under Sika Plug.
Cleaning of Equipment: Clean all tools immediately after use with water. Hardened material can only be removed mechanically.
Need a fast solution to stop water leaks? Sika Plug is your go-to rapid setting mortar. Get unbeatable trade prices and fast nationwide shipping on all Sika products, including Sika Plug.
Pick up your order from our store, Sika Wetherill Park in Sydney, or any Sika warehouse nationwide.
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
