Soudal All Purpose Silicone Sealant 300ml Concrete Grey

Soudal All Purpose Silicone is a high-quality, flexible, neutral cure silicone suitable for a wide range of sealing, waterproofing, and bonding applications where protection against mould and mildew is required. This product is the ultimate all-rounder silicone and is suitable for the broadest range of applications.

It offers strong adhesion to ceramics, glass, aluminium (including powder-coated and anodised), PVC, stainless steel, zinc and galvanised coated surfaces, timber, concrete, fibreglass, laminate, painted surfaces, and more. For best performance, clean non-porous surfaces with Soudal Cleaner & Degreaser before application.

FEATURES & BENEFITS

• Quality neutral cure
• Roof & gutter
• Kitchen & bathroom
• Glass & glazing
• Mould resistant
• Water potable
• Food safe (clear and white colour)

APPLICATIONS

A high-quality, flexible, neutral cure silicone suitable for a wide range of applications, including:

Bathrooms & Kitchens: For sealing baths, sinks, toilets, showers, tiles, plumbing fixtures, glass, tiles, etc.

Roofs & Gutters: For sealing and guttering, flashings, cladding, roofing, down pipes, ducting, lap joints, sheet metal, etc. Available in matching Colorbond metal colours.

Windows & Glazing: For sealing around windows, display cabinets, frames, and architraves, etc.

PACKAGING

Colour options: Beige, Grey, Alu Grey, Ivory, Black, Brilliant White, Transparent, Dark Grey, Stone, Pewter, Charcoal, Alabaster, Titania, Taupe
Packaging: 300 ml cartridge
Shelf life: 15 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°C.

NOTE

•  Do not use on natural stones like marble, granite, etc. (staining). Use Soudal Silirub MA or Silirub+ S8800 for this application.
• Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.
• A total absence of UV can cause a colour change of the sealant.
  In an acid environment or in a dark room, a white sealant can slightly turn yellow. Under the influence of sunlight, it will return to its initial colour.
• When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution.
• This will cause the sealant not to adhere to that surface. Therefore, we recommend only dipping the finishing tool in this solution.
• We strongly recommend not to apply the Finishing Solution in full sunlight as it will dry very fast in these circumstances.
• Do not use on polycarbonate. Use Silirub PC instead.
• Do not use in applications where continuous water immersion is possible.
• When using different reactive joint sealants, the first joint sealant must be completely hardened before the next one is applied.

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.