EPiC AquaFloor – High Strength, 2 Pack, Water Based Polyurethane
EPiC AquaFloor is a high-strength, water-based, low-VOC, 2-pack polyurethane floor coating. It protects concrete, timber, masonry, and primed metal surfaces. EPiC AquaFloor has been developed to provide excellent exterior and interior durability and protect against petrol, oil, fatty oils, alkali, acid, and efflorescence. It is ideal for various applications, such as commercial and industrial floors and walls.
EPiC AquaFloor is also food-grade compliant and can be used in various areas, including restaurants, hospitals, and supermarkets.
Protects Against
- Petrol
- Oil
- Fatty Oils
- Alkali
- Acid
- Efflorescence
Benefits
- Excellent interior and exterior durability
- Hardwearing
- Excellent adhesion
- Excellent hardness
- High resistance to abrasion
- Impervious to water and moisture
- Corrosion-resistant
- Easy application by brush, roll or spray
Appearance
Clear or Coloured Viscous Liquid
Coverage Rate
8 – 10 m²/L
Suitable Surfaces
- Concrete Slabs
- Exterior Timber
- Interior Timber
- Metals Surfaces
Application
For detailed substrate preparation and application steps, please download the AquaFloor application guide.
Equipment Type
Do not store the mixed product in spray equipment to avoid damage.
Surface Preparation
Prepare bare concrete surfaces using EcoSafe Etch or Nu-EcoSafe Ultra Etch following the recommendations in the relevant TDS. Allow the surface to dry thoroughly before application.
Mixing
Mixing 4 Parts A to 1 Part B (single 2-pack kit). Mix using a drill mixer; hand stirring is not sufficient. Leave to stand for 10 minutes before use to allow full activation.
Please do not use it after the pot life has expired (2 hours).
Thinning
For spray application, use 10% – 15% with clean water. Do not thin for brush or roller application.
Bare concrete and masonry surfaces should be thinned by 20%—25% before the first coat is applied for penetration and adhesion.
Application
- Roller or brush: Apply two even coats, observing minimum film thickness, recoat and dry times as outlined in the TDS
- Spray: Apply 2-3 even coats, observing minimum film thickness, recoat and dry times as outlined in the TDS
Drying and Curing
EPiC AquaFloor should be touch dry and able to be recoated after 8 hours. For a full cure, allow drying for seven days.
Download Datasheets for full information.Â
Â
Colour Accuracy Disclaimer:Â We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
