Sikafloor 14 Prep 'N' Prime 10L

Prepare Non-Porous Surfaces with Sikafloor 14 Prep 'N' Prime 

Looking for a reliable primer to ensure excellent adhesion on smooth, non-absorbent surfaces in your Australian construction projects? Sikafloor®-14 Prep 'N' Prime is a solvent-free, 1-component primer specifically designed to create a strong bond for subsequent flooring materials.

Why Choose Sikafloor 14 Prep 'N' Prime for Non-Porous Substrates in Australia?

This advanced primer offers several key advantages for preparing challenging surfaces:

• Excellent Adhesion: Specially formulated for sound, smooth, and non-absorbent substrates like tiles and existing coatings.
• Ready to Use: Single component and requires no mixing, saving you time and effort.
• Solvent Free & Very Low VOC: A more environmentally friendly and user-friendly option for indoor and outdoor applications.
• Fast Drying: Typically dries in 50 minutes or more at 23°C, allowing for quick overcoating.
• Internal & External Use: Suitable for a wide range of projects.
• Easy Application: Can be easily applied with a brush or roller.
• Promotes Grip: Dries to a keyed surface that enhances the adhesion of subsequent levelling compounds and other materials.
• Time-Saving: A practical alternative to mechanical grinding on non-porous surfaces.
• Compatible with Sika Systems: Designed for use with various Sikafloor®, SikaBond®, Sikadur®, SikaTite®, and Davco® products.

Where Can You Use Sikafloor®-14 Prep 'N' Prime in Australia?

This primer is ideal for preparing the following clean and bonded surfaces:

• Ceramic & porcelain tiles
• Terrazzo
• Non-porous coatings
• Sikafloor®-158 W Fast Barrier (Moisture Barrier)
• Vinyl flooring
• Davco® or SikaTite® acrylic membranes
• Sikafloor® Epoxy Coatings (cured for at least 24 hours)

Key Product Features:

Here's a summary of the key features of Sikafloor®-14 Prep 'N' Prime:

• Solvent Free
• 1-Component, Ready to Use
• Very Low VOC
• Fast Drying
• Non DG Storage
• Light Blue Liquid (easy to see coverage)

Application Guidelines (Refer to Full Product Data Sheet for Detailed Instructions):

• Consumption: Approximately ~ 8m² per litre (may vary based on substrate texture and application).
• Ambient Temperature: +5 °C to 35 °C.
• Waiting Time to Overcoating: Minimum 50 minutes at 23°C (must be completely dry).

Important Considerations:

Please note the following important points before using Sikafloor®-14 Prep 'N' Prime:

• Do not apply over concrete surfaces.
• Should not be applied over solvent-based finishes.
• External applications require full drainage and are not suitable for submerged conditions.
• Only apply over SikaTite® or Davco® acrylic membranes.
• Sikafloor® 100% Solids Epoxy must be cured for at least 24 hours before application.
• Do not apply onto wet or damp substrates.
• Bond testing is recommended to verify product suitability for specific substrates.

Packaging: 10 Ltr Pail

Ensure a strong foundation for your flooring projects in Australia with Sikafloor®-14 Prep 'N' Prime!

For detailed product specifications, substrate preparation instructions, and safety information, please refer to the latest local Product Data Sheet and Safety Data Sheet available for Australia.

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.