APCO RapidPave Paving Enamel 20L

APCO RapidPave Paving Enamel – Heavy Duty Concrete & Driveway Paint

Upgrade and protect your surfaces with APCO RapidPave Paving Enamel, a premium polyurethane-based paving paint suitable for protection of driveways, paths, verandas, courtyards and workshop floors made with timber & concrete. This fast-drying, heavy-duty coating delivers a durable, low-gloss finish that resists wear, weather, and everyday spills.

Ideal for both interior and exterior use, RapidPave provides a tough, long-lasting finish for residential and commercial spaces.

Download product datasheets and safety datasheets from the documents tabs for full product information including  preparation and application.

Why Choose APCO RapidPave?

• Heavy-duty concrete & driveway paint
• Fast drying – touch dry in 20 minutes
• Recoat in just 2 hours
• Durable polyurethane enamel finish
• Suitable for concrete and timber surfaces
• Low sheen finish (20–25% gloss level)
• Compatible with anti-slip additives
• Easy application – brush, roller, or spray

Best For

• Driveways
• Pathways
• Verandas
• Courtyards
• Garage & workshop floors

Not Suitable For

• Clay or terracotta pavers
• Rubber or vinyl surfaces
• Pool surrounds or wet areas
• Marine environments
• Surfaces with rising moisture

Product Specifications

• Coverage: 12–14m² per litre
• Touch Dry: 20 minutes
• Recoat Time: 2 hours
• Full Cure: Approx. 7 days
• Heat Resistance: Up to 120°C
• Finish: Low gloss (20–25%)
• Thinning: Up to 10% with mineral turps

Surface Preparation

• Ensure surface is clean, dry, and contaminant-free
• New concrete must cure for 4–6 weeks
• Acid etch smooth concrete for best adhesion
• Remove all loose or flaking paint before recoating

If water beads on the surface, further cleaning is required.

Application Guide

1. Stir thoroughly before use
2. Apply using brush, roller, or spray
3. Apply 2 coats (thin first coat up to 10%)
4. Allow 2 hours between coats

Avoid painting in damp, cold, or humid conditions.

Driveway Use & Garage Floors: Hot Tyre Pick Up 

• Allow minimum 7 days curing before parking
• Avoid placing hot tyres on fresh coating
• Let tyres cool for 10–20 minutes before parking

Maintenance

• Clean with mild detergent and water
• Avoid harsh scrubbing or pressure washing
• Regular cleaning helps maintain finish

Pro Tips

• Add aggregate for slip resistance on slopes
• Mix thoroughly and re-mix during use for consistency
• Always test on a small area over unknown coatings

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.