Soudal SMX 20 Plus Timber Flooring Adhesive - Light Brown

SMX-20 PLUS is a universal timber flooring adhesive based upon SMX® hybrid polymers. Suitable for indoor bonding of engineered boards, ready to use timber and solid wood. SMX-20 PLUS contains no water or solvents, minimising the risk of deforming the parquet to a minimum. Once fully cured (approx. 24 hrs) an elastic and non-shrinkable adhesive layer is formed, which is resistant to moisture and heat.

Features & Benefits:

• Fast curing
• Walk on after 8 hr, sand after 24 hrs
• Ready to use, no mixing required
• Remains permanently elastic
• Free of isocyanates, solvents & water.

Applications:

• Suitable for indoor bonding of engineered boards, ready to use parquet and solid wood.
• Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (large particle size chipboard), including floors with under floor heating and cooling.

Shelf life:

• Foil bag at least 9 months in unopened packaging in a cool and dry storage at temperatures between +5°C and +25°C
• 3 alu-bags in a plastic bucket (3 x 6 kg = 18kg) at least 12 months in unopened packaging in a cool and dry storage at temperatures between +5°C and +25°C no longer usable. In that case, the properties required for the intended use must be checked.

Notes:

• Never install flooring on subfloors, which are not protected against possible rising damp.
• Do not apply the adhesive at temperatures below 10°C or above 35°C
• Minimum temperature of the substrate should be at least 15°C.
• Do not apply the adhesive when the relative humidity is above 75%.
• Never install flooring on a substrate which contains too much moisture or on substrates with a higher humidity value than recommended by the wood supplier.
• Never install wood which is too dry (<7% humidity). This can expand at higher humidity or when the humidity rises and cause damage.
• Do not install flooring if the walls and ceilings in the area are not dry (e.g. after plastering or painting etc.)
• When placing parquet onto floor cooling the minimum water temperature must not fall below 18°C. This to prevent condensation on top of the parquet
• Do not dilute the adhesive

Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.