Sealant Remover is a ready to use and rapid spray based on hydrocarbons for removing cured silicone and MS polymers.
Properties
- Fast acting
- Does not drip
- Specifically for silicones and MS polymers
Applications
- Removal of old silicone residue, spilled silicone or spilled MS polymers from different kind of surfaces
- Removes all residue of spilled silicone
Packaging
Colour: yellow-transparent
Packaging: 400 ml aerosol
Shelf Life
3 years in unopened packaging in a dry and cool environment at temperatures between +5°C and +25°C.
Substrates
Substrates: coated metals, ceramic tiles, laminated plate, painted surfaces, glass, aluminium, some synthetic materials (NOT nylon and PMMA)
Nature: dry
Application Method
Apply on dry ground and dry conditions. Remove hard putty first with a knife. Shake the canister thoroughly and apply Sealant Remover on the surface to be cleaned. Leave to work for at least 10 min. Wipe dry with a clean cloth. Repeat if necessary. Wash thoroughly with water to avoid surface degradation.
Note: Sealant Remover can cause staining on porous surfaces. Due to the wide variety of possible plastics and paints and to avoid damage to the surface, a preliminary compatibility test is recommended
Colour Accuracy Disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
