{"product_id":"epirez-safe-step-100-light-grey-4l","title":"Epirez Safe Step 100 Anti-Slip Coating 4l","description":"\u003cp\u003eEPIREZ Safe Step 100 is a single-pack epoxy ester anti-slip coating designed for areas with heavy pedestrian traffic. It provides a durable, textured safety surface with optimum adhesion to metal, concrete and wood surfaces.\u003c\/p\u003e\n\u003cp\u003eSafe Step 100 is designed for both indoor and outdoor applications where a durable non-slip surface is required. It is easy to apply by roller or trowel and can also be touched up by brush.\u003c\/p\u003e\n\u003cp\u003eThe cured coating provides chemical resistance and fire retardancy, with resistance to gasoline, oil, acids, alkalis and aliphatic solvents.\u003c\/p\u003e\n\u003ch3\u003eKey Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-pack system:\u003c\/strong\u003e Resin, grit and colour are combined in one ready-to-use coating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy pedestrian grade:\u003c\/strong\u003e Designed for areas exposed to heavy pedestrian traffic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-slip performance:\u003c\/strong\u003e Tested by CSIRO with an anti-slip rating of up to R13.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad substrate compatibility:\u003c\/strong\u003e Suitable for concrete, asphalt, timber and metal surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy application:\u003c\/strong\u003e Can be applied by roller or trowel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple touch-ups:\u003c\/strong\u003e Brush application can be used for touch-up work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistant:\u003c\/strong\u003e Resists gasoline, oil, acids, alkalis and aliphatic solvents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire retardant:\u003c\/strong\u003e Provides fire retardancy in the cured state.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor and outdoor use:\u003c\/strong\u003e Designed for both indoor and outdoor applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere Can EPIREZ Safe Step 100 Be Used?\u003c\/h3\u003e\n\u003cp\u003eSafe Step 100 is designed for pedestrian areas where a durable anti-slip surface is required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePedestrian ramps in factories\u003c\/li\u003e\n\u003cli\u003eShopping centres and other busy areas\u003c\/li\u003e\n\u003cli\u003eWet areas such as pool surrounds\u003c\/li\u003e\n\u003cli\u003eAreas behind hotel bars\u003c\/li\u003e\n\u003cli\u003eStairways\u003c\/li\u003e\n\u003cli\u003eCatwalks\u003c\/li\u003e\n\u003cli\u003eNursing homes\u003c\/li\u003e\n\u003cli\u003eSchools\u003c\/li\u003e\n\u003cli\u003eChange rooms\u003c\/li\u003e\n\u003cli\u003eEquipment platforms\u003c\/li\u003e\n\u003cli\u003eBakeries\u003c\/li\u003e\n\u003cli\u003eFood processing plants\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAnti-Slip Performance\u003c\/h3\u003e\n\u003cp\u003eEPIREZ Safe Step 100 has been tested by \u003cstrong\u003eCSIRO\u003c\/strong\u003e and has an anti-slip rating of \u003cstrong\u003eup to R13\u003c\/strong\u003e according to \u003cstrong\u003eAS 4586:2013 Appendix D\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe coating creates a textured, non-slip surface. Roller application produces an irregular, ridged profile, while trowel application creates a rough, textured surface.\u003c\/p\u003e\n\u003cp\u003eFor roller application, the non-slip aggregate should be properly exposed to achieve the intended non-slip characteristics. If the aggregate is not adequately exposed, the coating may become slippery when wet.\u003c\/p\u003e\n\u003ch3\u003eCoverage and Kit Size\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Size\u003c\/th\u003e\n\u003cth\u003eApplication Method\u003c\/th\u003e\n\u003cth\u003eEstimated Coverage\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e4 L\u003c\/td\u003e\n\u003ctd\u003eRoller or trowel\u003c\/td\u003e\n\u003ctd\u003e4.8 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eApplication of EPIREZ Safe Step 100\u003c\/h3\u003e\n\u003cp\u003eSafe Step 100 can be applied by roller or trowel. The coating can be applied at surface temperatures between 10°C and 40°C.\u003c\/p\u003e\n\u003cp\u003eApplication is not recommended when the surface temperature is below 10°C or above 40°C. Lower temperatures and high humidity can increase drying times, while higher temperatures can shorten them.\u003c\/p\u003e\n\u003cp\u003eExterior applications should be protected from rain for at least \u003cstrong\u003e12–24 hours\u003c\/strong\u003e after application, depending on humidity.\u003c\/p\u003e\n\u003cp\u003eProtect the coating from heavy or extended exposure to water, oil and chemicals for \u003cstrong\u003e5–7 days\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eMixing Instructions\u003c\/h3\u003e\n\u003cp\u003eSafe Step 100 is a \u003cstrong\u003esingle-pack epoxy system\u003c\/strong\u003e. The resin, grit and colour are combined as one part, so no Part A and Part B mixing is required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStir the contents thoroughly before use.\u003c\/li\u003e\n\u003cli\u003eApply directly from the can.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRoller Application\u003c\/h3\u003e\n\u003cp\u003eRoller application provides the most effective non-slip characteristics with an irregular, ridged profile.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse a hard-faced roller.\u003c\/li\u003e\n\u003cli\u003ePour a ribbon of Safe Step 100 approximately 600 mm long and 150 mm wide.\u003c\/li\u003e\n\u003cli\u003eRoll in slow, straight strokes using moderate pressure.\u003c\/li\u003e\n\u003cli\u003eAvoid excessive rolling or pressing down too heavily.\u003c\/li\u003e\n\u003cli\u003eRoll across welds or joints rather than along them.\u003c\/li\u003e\n\u003cli\u003eDo not apply the material too thickly, as it may not cure properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTrowel Application\u003c\/h3\u003e\n\u003cp\u003eTrowel application creates a rough, textured surface with excellent non-slip characteristics.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse a flexible-bladed plasterer's finishing trowel approximately 100 mm × 300 mm.\u003c\/li\u003e\n\u003cli\u003eUse smooth edges rather than a notched trowel.\u003c\/li\u003e\n\u003cli\u003ePour a ribbon of Safe Step 100 approximately 600 mm long and 150 mm wide.\u003c\/li\u003e\n\u003cli\u003eHold the trowel at approximately 45° to the surface.\u003c\/li\u003e\n\u003cli\u003eSpread using a sweeping motion.\u003c\/li\u003e\n\u003cli\u003eReverse the trowel angle for the opposite stroke.\u003c\/li\u003e\n\u003cli\u003eUse straight strokes when covering corners and similar areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConcrete Surface Preparation\u003c\/h3\u003e\n\u003cp\u003eProper surface preparation is important before applying Safe Step 100.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove oil, grease, dirt, wax and other contamination using an emulsifiable water-based cleaner or degreaser.\u003c\/li\u003e\n\u003cli\u003eClean the surface with fresh water.\u003c\/li\u003e\n\u003cli\u003eApply an acidic etch such as EPIREZ® Concrete Etch \u0026amp; Cleaner.\u003c\/li\u003e\n\u003cli\u003eRinse again with fresh water.\u003c\/li\u003e\n\u003cli\u003eAllow the surface to dry completely before application.\u003c\/li\u003e\n\u003cli\u003eRoughen smooth or glazed surfaces.\u003c\/li\u003e\n\u003cli\u003ePrime porous surfaces with a suitable sealer before application.\u003c\/li\u003e\n\u003cli\u003eNew concrete should be cured for at least 28 days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor porous surfaces, EPIREZ® Crack Repair Epoxy Sealer is listed as a suitable sealer option.\u003c\/p\u003e\n\u003ch3\u003eMetal and Galvanised Surface Preparation\u003c\/h3\u003e\n\u003cp\u003eRemove paint, rust and mill scale from metal and galvanised surfaces, preferably by grit blasting.\u003c\/p\u003e\n\u003cp\u003ePrime the prepared surface with a suitable etch primer before applying Safe Step 100.\u003c\/p\u003e\n\u003ch3\u003eTimber Surface Preparation\u003c\/h3\u003e\n\u003cp\u003eTimber should be primed with EPIREZ Crack Repair Epoxy Sealer or another suitable wood primer before applying Safe Step 100.\u003c\/p\u003e\n\u003ch3\u003eChemical Resistance\u003c\/h3\u003e\n\u003cp\u003eIn the cured state, Safe Step 100 provides resistance to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGasoline\u003c\/li\u003e\n\u003cli\u003eOil\u003c\/li\u003e\n\u003cli\u003eAcids\u003c\/li\u003e\n\u003cli\u003eAlkalis\u003c\/li\u003e\n\u003cli\u003eAliphatic solvents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eTechnical Data\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eEPIREZ® Safe Step 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eEpoxy ester, single-pack anti-slip coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating Type\u003c\/td\u003e\n\u003ctd\u003eSingle-pack epoxy ester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Slip Rating\u003c\/td\u003e\n\u003ctd\u003eUp to R13 according to AS 4586:2013 Appendix D, as tested by CSIRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Traffic\u003c\/td\u003e\n\u003ctd\u003e12 hours at 20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeavy Traffic\u003c\/td\u003e\n\u003ctd\u003e72 hours at 20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull Chemical Resistance\u003c\/td\u003e\n\u003ctd\u003e7 days at 25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash Point\u003c\/td\u003e\n\u003ctd\u003e42°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC Content\u003c\/td\u003e\n\u003ctd\u003e340 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume Solids\u003c\/td\u003e\n\u003ctd\u003e61%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Temperature\u003c\/td\u003e\n\u003ctd\u003e10°C to 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Methods\u003c\/td\u003e\n\u003ctd\u003eRoller or trowel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003e4.8 m² per 4 L by roller or trowel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eAvailable in 4 colours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Always read the current manufacturer's Technical Data Sheet before mixing, surface preparation or application.\u003c\/em\u003e\u003c\/p\u003e","brand":"Epirez","offers":[{"title":"Light Grey","offer_id":41373292691520,"sku":"E460004","price":262.5,"currency_code":"AUD","in_stock":true},{"title":"Dark Grey","offer_id":41373292724288,"sku":"E460005","price":262.5,"currency_code":"AUD","in_stock":true},{"title":"Yellow","offer_id":41373292757056,"sku":"E460006","price":262.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/EpirezSafeStep100LightGrey4l.jpg?v=1787265511","url":"https:\/\/protradewarehouse.com.au\/products\/epirez-safe-step-100-light-grey-4l","provider":"Protrade Warehouse | Trade \u0026 DIY Supplies Australia-Wide","version":"1.0","type":"link"}