{"title":"Steel Reinforcement Primers","description":"","products":[{"product_id":"sikadur-32-lp","title":"Sikadur 32 LP - Epoxy Bonding Agent \u0026 Reinforcement Corrosion Protection","description":"\u003cp\u003eSikadur 32 LP is a moisture-tolerant, structural, two-part bonding agent based on epoxy resins and special fillers. It's designed with a longer pot life for use at higher temperatures (+20 °C to +40 °C). This versatile product offers excellent adhesion to various construction materials and provides high bond strength. Available from ProTrade Warehouse across Australia for experienced professionals.\u003c\/p\u003e\n\u003ch3\u003eUses\u003c\/h3\u003e\n\u003cp\u003eSikadur-32 LP is for experienced professionals and can be used for corrosion protection of reinforcement and as a structural bonding agent and adhesive for concrete elements (including bonding fresh to hardened concrete), hard natural stone, ceramics, fibre-cement, Monotop Repair Mortars, bricks, masonry, render, steel, iron, aluminium, wood, polyester\/fibreglass, epoxy resin materials, and glass.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to mix and apply.\u003c\/li\u003e\n\u003cli\u003eSuitable for dry and damp concrete substrates.\u003c\/li\u003e\n\u003cli\u003eVery good adhesion to most construction materials.\u003c\/li\u003e\n\u003cli\u003eHigh bond strength.\u003c\/li\u003e\n\u003cli\u003eHardens without shrinkage.\u003c\/li\u003e\n\u003cli\u003eDifferent coloured components (for mixing control).\u003c\/li\u003e\n\u003cli\u003eNo primer needed.\u003c\/li\u003e\n\u003cli\u003eHigh initial and ultimate mechanical strengths.\u003c\/li\u003e\n\u003cli\u003eImpermeable to liquids and water vapour.\u003c\/li\u003e\n\u003cli\u003eGood chemical resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eComposition:\u003c\/strong\u003e Epoxy resin and selected fillers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 3 lt (A \u0026amp; B) kit, 18 lt (A \u0026amp; B) kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour (Mixed):\u003c\/strong\u003e Concrete grey (Component A: white, Component B: dark grey)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e 24 months from date of production\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage conditions:\u003c\/strong\u003e Store in original, unopened, and undamaged sealed packaging in dry conditions between +5 °C and +30 °C. Always refer to packaging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDensity (mixed):\u003c\/strong\u003e 1.4 ± 0.1 kg\/l (at +23 °C)\u003c\/p\u003e\n\u003ch3\u003eApplication Information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio:\u003c\/strong\u003e Part A : Part B = 2 : 1 by weight or volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption:\u003c\/strong\u003e ~1.3 kg\/m² per mm of thickness (theoretical, does not account for surface variations or wastage).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e ~1 mm max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSag flow:\u003c\/strong\u003e Non-sag up to 1.0 mm thickness on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial temperature:\u003c\/strong\u003e +20 °C min. \/ +40 °C max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient air temperature:\u003c\/strong\u003e +20 °C min. \/ +40 °C max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDew point:\u003c\/strong\u003e Steel substrate temperature during application must be at least +3 °C above dew point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate temperature:\u003c\/strong\u003e +20 °C min. \/ +40 °C max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate moisture content:\u003c\/strong\u003e Must be dry or mat damp (no standing water). Brush the material well into the substrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot Life:\u003c\/strong\u003e ~145 minutes at +20 °C, ~55 minutes at +30 °C, ~35 minutes at +40 °C (for 200g mass). Pot life shortens with higher temperatures and larger quantities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen time:\u003c\/strong\u003e ~270 minutes at +20 °C, ~240 minutes at +30 °C, ~120 minutes at +40 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Considerations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConsult a structural engineer for design calculations in structural applications due to creep behaviour of polymers under load. Long-term structural design load should be significantly lower than failure load.\u003c\/li\u003e\n\u003cli\u003eWhen using multiple units, mix the next unit only after the previous one has been used.\u003c\/li\u003e\n\u003cli\u003eProvide temporary support for heavy components positioned vertically or overhead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eECOLOGY, HEALTH AND SAFETY\u003c\/h3\u003e\n\u003cp\u003eFor information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Safety Data Sheet (SDS).\u003c\/p\u003e\n\u003ch3\u003eAPPLICATION INSTRUCTIONS\u003c\/h3\u003e\n\u003ch4\u003eSUBSTRATE QUALITY\u003c\/h4\u003e\n\u003cp\u003eHardened mortar and concrete must be older than 28 days (depending on any minimal strength requirements). Verify the substrate strength by testing (concrete, masonry, natural stone). The substrate surface (all types) must be clean, dry or mat damp (no standing water) and free from contaminants such as dirt, oil, grease, existing surface treatments and coatings etc.\u003cbr\u003eSteel substrates must be de-rusted to a condition similar to Sa 2.5. The substrate must be sound and all loose or friable particles must be removed.\u003c\/p\u003e\n\u003ch4\u003eSUBSTRATE PREPARATION\u003c\/h4\u003e\n\u003cp\u003eConcrete, mortar, stone and brick\u003cbr\u003eConcrete and other hardened mineral substrates must be prepared by suitable means such as high pressure water jetting and \/ or blast cleaning, in order to obtain surfaces that are sound, clean, dry or mat damp (no standing water) and free from any cement laitance, ice, grease, oils, old coatings or other surface treatments. Any loose or friable particles must also be removed to achieve a contaminant free and open textured surface.\u003c\/p\u003e\n\u003cp\u003eSteel\u003cbr\u003eSteel surface must be cleaned and prepared thoroughly to an acceptable quality standard equivalent to Sa 2.5 i.e. normally by blast cleaning and then removing any dust by vacuum. Avoid dew point conditions.\u003c\/p\u003e\n\u003ch4\u003eMIXING\u003c\/h4\u003e\n\u003cp\u003ePre-batched units:\u003cbr\u003eMix components A+B together for at least 3 minutes with a mixing spindle attached to a slow speed electric drill (max. 300 rpm) until the material becomes smooth in consistency and a uniform grey colour. Avoid aeration while mixing. Then, pour the whole mix into a clean container and stir again for approx. 1 more minute at low speed to keep air entrapment at a minimum. Mix only that quantity which can be used within its pot life.\u003c\/p\u003e\n\u003ch4\u003eAPPLICATION METHOD \/ TOOLS\u003c\/h4\u003e\n\u003cp\u003eApply the mixed Sikadur 32 LP to the prepared surface by brush, roller, spray or with a trowel, and ensure uniform and complete coverage. On hardened concrete substrates mechanically prepared to receive fresh concrete, always apply by brush and work the material well into the substrate.\u003c\/p\u003e\n\u003cp\u003ePlace the fresh concrete whilst the Sikadur 32 LP layer is still ‘tacky’. If the material becomes glossy and loses tackiness, apply a fresh coat with additional Sikadur®-32 LP and proceed.\u003c\/p\u003e\n\u003ch4\u003eCLEANING OF EQUIPMENT\u003c\/h4\u003e\n\u003cp\u003eClean all tools and application equipment with Sika Colma Cleaner immediately after use. Hardened material can only be mechanically removed.\u003c\/p\u003e\n\u003cp\u003eGet Sikadur-32 LP epoxy bonding agent from ProTrade Warehouse. Collect from any Sika warehouse or our Silverwater store. Delivery available Australia wide.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Sika","offers":[{"title":"3L","offer_id":40567432052800,"sku":"32-LP-3","price":130.0,"currency_code":"AUD","in_stock":true},{"title":"18L","offer_id":40567432085568,"sku":"32-LP-18","price":775.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sikadur_32_LP.png?v=1767827405"},{"product_id":"sika-monotop-910n","title":"Sika MonoTop 910N Steel Reinforcement Primer 10kg","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBonding Primer and Reinforcement Corrosion Protection\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSika MonoTop-910 N is a cementitious, polymer modified one-component coating material containing silica fume used as a bonding primer and reinforcement corrosion protection for reinforcement. Sika MonoTop-910 N meets the requirements of EN 1504-7.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified to EN 1504-7\u003c\/li\u003e\n\u003cli\u003eEasy to mix, just add water\u003c\/li\u003e\n\u003cli\u003eUser-friendly application\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to concrete and steel\u003c\/li\u003e\n\u003cli\u003eGood resistance to water and chloride penetration\u003c\/li\u003e\n\u003cli\u003eGood mechanical strengths\u003c\/li\u003e\n\u003cli\u003eCan be brushed on or applied using a spray gun\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for control of anodic areas (Principle 11, method 11.1 of EN 1504-9)\u003c\/li\u003e\n\u003cli\u003eSuitable as a bonding primer on concrete and mortar\u003c\/li\u003e\n\u003cli\u003eSuitable in concrete repair as reinforcement corrosion protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eProduct Information\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eComposition:\u003c\/strong\u003e Portland cement, silica fume, re-dispersible polymer powder, selected aggregates and additives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 10 kg Pail\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf Life:\u003c\/strong\u003e 12 months\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage Conditions:\u003c\/strong\u003e Store properly in undamaged original sealed packaging, in dry cool conditions between +5 °C and +35°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance and Colour:\u003c\/strong\u003e Grey powder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDensity:\u003c\/strong\u003e Fresh mortar density ~1.9 kg\/l\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoluble Chloride Ion Content:\u003c\/strong\u003e ≤ 0.01 %\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eTechnical Information\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompressive Strength:\u003c\/strong\u003e ~50 MPa after 28 days\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTensile Adhesion Strength:\u003c\/strong\u003e ≥ 2.0 MPa after 28 days\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSystem Information\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eSika MonoTop-910 N is part of the range of Sika mortars complying with the relevant part of European Standard EN 1504, comprising the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Primer \/ Reinforcement Corrosion Protection:\u003c\/strong\u003e Sika MonoTop 910 N - Normal Use\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e Repair Mortars:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSika MonoTop-352 NFG - Class R3 Structural lightweight repair mortar\u003c\/li\u003e\n\u003cli\u003eSika MonoTop-412 NFG - Class R4 Structural repair mortar\u003c\/li\u003e\n\u003cli\u003eSika MonoTop-612 N - Class R4 Structural high build repair mortar\u003c\/li\u003e\n\u003cli\u003eSika MonoTop-436 N - Class R4 Structural micro-concrete repair mortar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevelling Mortar:\u003c\/strong\u003e Sika MonoTop-723 N - Pore sealer and levelling mortar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eApplication Information\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMixing Ratio:\u003c\/strong\u003e For large volume: 2.0 - 2.2 litres of water per 10 kg bag; 4.0 - 4.4 litres of water per 20 kg bag. For small volume: 4 parts of powder to 1 part of water by volume.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsumption:\u003c\/strong\u003e Bonding Primer: ~1.5 – 2.0 kg of powder per m² per mm thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLayer Thickness:\u003c\/strong\u003e As bonding primer - sufficient to coat the concrete surface in a thin layer filling unevenness, pores, and pits. As reinforcement corrosion protection - 2 mm minimum thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmbient Air Temperature:\u003c\/strong\u003e +5°C minimum; +30°C maximum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate Temperature:\u003c\/strong\u003e +5°C minimum; +30°C maximum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePot Life:\u003c\/strong\u003e ~90 to 120 minutes at +20°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInitial Set Time:\u003c\/strong\u003e ~5.5 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Set Time:\u003c\/strong\u003e ~7.5 hours.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eApplication Instructions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate Quality \/ Pre-treatment:\u003c\/strong\u003e Concrete should be thoroughly clean, free from dust, loose material, surface contamination, and materials that reduce bond or prevent suction or wetting by repair materials. De-laminated, weak, damaged, and deteriorated concrete should be removed by suitable means.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing:\u003c\/strong\u003e Sika MonoTop-910 N can be mixed with a low-speed (\u0026lt;500 rpm) electric drill mixer. For small quantities, it can also be mixed by volume in a 4:1 powder-to-water ratio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Apply by brush, roller, or suitable spraying equipment to the prepared (pre-wetted) substrate. Apply the bonding primer while it is still wet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCuring Treatment:\u003c\/strong\u003e Protect the fresh mortar immediately from premature drying and contamination using an appropriate curing method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning of Equipment:\u003c\/strong\u003e Clean all tools and application equipment with water immediately after use.\u003c\/p\u003e\n\u003cp\u003eDownload the product datasheet for more detailed information on application and use of Sika MonoTop-910 N. We ensure that every product from Protrade Warehouse meets the highest standards.\u003c\/p\u003e\n\u003cp\u003eFor further assistance or more product details, feel free to reach out!\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567434346560,"sku":"MT-910N-10","price":70.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sika_MonoTop_910N.png?v=1767827285"},{"product_id":"sikatop-armatec-110-epocem","title":"SikaTop Armatec 110 Epocem 20KG Kg Kit  Bonding primer","description":"\u003ch2\u003eSikaTop Armatec-110 EpoCem - Bonding Primer \u0026amp; Corrosion Protection\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e3-Component Coating with Corrosion Inhibitor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSikaTop Armatec-110 EpoCem is a cementitious epoxy resin compensated 3-component coating material containing a corrosion inhibitor. It is used as a bonding primer and for reinforcement corrosion protection. SikaTop Armatec-110 EpoCem meets the requirements of EN 1504-7.\u003c\/p\u003e\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9)\u003c\/li\u003e\n\u003cli\u003eIn concrete repair as corrosion protection for reinforcement.\u003c\/li\u003e\n\u003cli\u003eAs a bonding primer on concrete and mortar.\u003c\/li\u003e\n\u003cli\u003eFor Increasing cover in Low Cover Concrete rectification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContains EpoCem technology - improved bonding agent\u003c\/li\u003e\n\u003cli\u003eExtended open times for repair mortars\u003c\/li\u003e\n\u003cli\u003eCompatible with most Sika MonoTop repair mortars\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to concrete and steel\u003c\/li\u003e\n\u003cli\u003eContains corrosion inhibitor\u003c\/li\u003e\n\u003cli\u003eCertified for application under dynamic load conditions\u003c\/li\u003e\n\u003cli\u003eGood resistance to water and chloride penetration\u003c\/li\u003e\n\u003cli\u003eHigh shear strength\u003c\/li\u003e\n\u003cli\u003eLong pot life\u003c\/li\u003e\n\u003cli\u003eEasy to mix\u003c\/li\u003e\n\u003cli\u003eCan be brushed on or applied using spray gun\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposition:\u003c\/strong\u003e Portland cement, epoxy resin, selected aggregates and additives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20KG Kit( A + B + C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage conditions:\u003c\/strong\u003e Store properly in undamaged original sealed packaging, in dry cool conditions between +5 °C and +25 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance and colour:\u003c\/strong\u003e Mixed components dark grey, Component A: white liquid, Component B: colourless liquid, Component C: dark grey powder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity (A+B+C at 23 °C approx.):\u003c\/strong\u003e ~2.0 kg\/l\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile adhesion strength (after 28 days):\u003c\/strong\u003e ≥ 2.0 N\/mm² (MPa) (EN 1542)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShear adhesion strength (EN 15184):\u003c\/strong\u003e Pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoefficient of thermal expansion (EN 1770):\u003c\/strong\u003e ~18 x 10⁻⁶ 1\/K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermeability to carbon dioxide (AS\/NZS 4548.5):\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDry Film Thickness: 3.4 mm\u003c\/li\u003e\n\u003cli\u003eCO₂ Diffusion Coefficient: 1.6 x 10⁻⁵ cm²\/sec\u003c\/li\u003e\n\u003cli\u003eDiffusion Resistance Coefficient (μ): 10390\u003c\/li\u003e\n\u003cli\u003eEquivalent Air Layer Thickness (R): 35 m\u003c\/li\u003e\n\u003cli\u003eEquivalent Thickness of Concrete (S c)*: 90 mm (* A μc value of 400 used for calculation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion test (EN 15183):\u003c\/strong\u003e Pass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSystem Information:\u003c\/h3\u003e\n\u003cp\u003eSikaTop Armatec-110 EpoCem is part of the Sika repair system complying with EN 1504, including Bonding Primer \/ Reinforcement Corrosion Protection, Light Weight Repair Mortar (Sika MonoTop-352 series), Structural Repair Mortar (Sika MonoTop-412 series), and Pore Sealer and Levelling Mortar (Sika MonoTop-723 N).\u003c\/p\u003e\n\u003ch3\u003eApplication Information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption (as reinforcement corrosion protection):\u003c\/strong\u003e ~ 2 kg per m² per layer (~1 mm thick), minimum 2 layers (~2 mm total).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption (as a bonding primer, substrate):\u003c\/strong\u003e \u0026gt; 1.5 to 2.0 kg per m²\/mm dependent on substrate conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYield:\u003c\/strong\u003e Approx. 4lt per 8kg kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient air temperature:\u003c\/strong\u003e +5 °C minimum; +30 °C maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate temperature:\u003c\/strong\u003e +5 °C minimum; +30 °C maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot Life (at +20 °C):\u003c\/strong\u003e ~ 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaiting time to overcoating (maximum before repair mortar application):\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e+5 °C: 6 hours\u003c\/li\u003e\n\u003cli\u003e+10 °C: 5 hours\u003c\/li\u003e\n\u003cli\u003e+20 °C: 2 hours\u003c\/li\u003e\n\u003cli\u003e+30 °C: 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Instructions:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate Quality \/ Pre-treatment:\u003c\/strong\u003e Concrete shall be free from dust, loose material, surface contamination. Remove delaminated, weak, damaged concrete. Pre-wet concrete thoroughly. Steel reinforcement: remove rust, scale, mortar, clean to SA 2 (ISO 8501-1) using abrasive blast cleaning or high-pressure water-blasting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing:\u003c\/strong\u003e Mix with a low speed (\u0026lt; 250 rpm) electric drill mixer. Shake components A and B. Pour A and B into a vessel and mix for 30 seconds. Slowly add component C while mixing. Mix all three for a minimum of 3 minutes, minimizing air entrapment. Let stand for 5–10 minutes until brushable consistency. DO NOT ADD WATER.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs reinforcement corrosion protection:\u003c\/strong\u003e Apply first layer (~1 mm) to cleaned reinforcement with a medium hard brush or spray gun. Apply the second layer when the first is hard to the fingernail (~2–3 hours at +20 °C). Apply subsequent repair mortars wet on dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs a bonding primer:\u003c\/strong\u003e Apply to prepared substrate with a medium hard brush or spray gun, ensuring it fills all pores (minimum 0.5 mm thickness). Apply subsequent repair mortars wet on wet. Protect freshly applied material from contamination and rain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCuring Treatment:\u003c\/strong\u003e Protect fresh mortar from rain until set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning of Equipment:\u003c\/strong\u003e Clean all tools with water immediately after use. Hardened material can only be mechanically removed.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567438114880,"sku":"1A4F63","price":300.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/SikaTop_Armatec_110_Epocem.png?v=1767827165"}],"url":"https:\/\/protradewarehouse.com.au\/collections\/steel-reinforcement-primers.oembed","provider":"Protrade Warehouse | Trade \u0026 DIY Supplies Australia-Wide","version":"1.0","type":"link"}