{"title":"Concrete Densifiers","description":"\u003chr style=\"border: none; height: 3px; background-color: #ffd401;\"\u003e\n\u003cp\u003eConcrete densifiers are chemical hardeners—typically lithium, sodium, or potassium silicates—designed to penetrate deep into concrete surfaces. They react with free lime within the substrate to form a denser, harder, and more durable surface. Whether you’re working with new slabs or restoring existing floors, densifiers play a critical role in improving performance and longevity.\u003c\/p\u003e\n\u003cp\u003eFor contractors and DIY users alike, concrete densifiers are essential when preparing floors for polishing or when looking to reduce dusting and surface wear. They are widely used across residential, commercial, and industrial environments where durability and low maintenance are priorities.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey Benefits of Using a Concrete Densifier\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIncreased hardness and density\u003c\/strong\u003e\u003cbr\u003eConcrete densifiers significantly improve the compressive strength of the surface, making it more resistant to abrasion, heavy traffic, and mechanical wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduced dusting\u003c\/strong\u003e\u003cbr\u003eOlder or untreated concrete can release fine dust over time. Densifiers eliminate this issue by binding loose particles and stabilising the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved polishing results\u003c\/strong\u003e\u003cbr\u003eIf you’re aiming for polished concrete, a densifier is a non-negotiable step. It allows the surface to achieve a higher gloss level while improving clarity and long-term finish retention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduced moisture ingress\u003c\/strong\u003e\u003cbr\u003eBy filling pores within the concrete, densifiers help limit water penetration and improve resistance to stains and mild chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLong-lasting performance\u003c\/strong\u003e\u003cbr\u003eUnlike topical coatings, densifiers penetrate into the concrete and become part of the structure. This means they won’t peel, flake, or wear off over time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTypes of Concrete Densifiers\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/protradewarehouse.com.au\/products\/crommelin-lithium-densifier-15l-clear\" target=\"_blank\" title=\"Lithium Densifiers\" rel=\"noopener\"\u003e\u003cstrong\u003eLithium silicate densifiers\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003eThe most commonly used option for polished concrete. They are highly reactive, easy to apply, and do not leave behind excess residue that requires removal.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/protradewarehouse.com.au\/collections\/concrete-densifiers\/products\/sikafloor-curehard-24-floor-sealer\" target=\"_blank\" title=\"sodium silicate densifier\" rel=\"noopener\"\u003e\u003cstrong\u003eSodium silicate densifiers\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003eA more economical choice, often used on large-scale industrial projects where cost efficiency is important.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/protradewarehouse.com.au\/collections\/concrete-densifiers\/products\/chemforce-forti-kal-potassium-silicate-densifier\" target=\"_blank\" title=\"Potassium Silicate Densifier\" rel=\"noopener\"\u003e\u003cstrong\u003ePotassium silicate densifiers\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003eKnown for deeper penetration, making them suitable for certain specialised applications.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/protradewarehouse.com.au\/collections\/concrete-densifiers\/products\/chemforce-forti-col-colloidal-silica-densifier\" target=\"_blank\" title=\"Colloidal Silica Densifier\" rel=\"noopener\"\u003e\u003cstrong\u003eColloidal silica densifiers\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003eFormulated with ultra-fine particles, these penetrate deeper into the substrate and react faster, creating a very dense and durable surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eAt Protrade Warehouse, we stock a range of professional-grade concrete densifiers, including trusted solutions from \u003ca href=\"https:\/\/protradewarehouse.com.au\/collections\/chemforce\" target=\"_blank\" title=\"Chemforce concrete densifiers\" rel=\"noopener\"\u003eChemforce\u003c\/a\u003e, suitable for both polishing systems and general concrete hardening applications.\u003c\/p\u003e\n\u003cp\u003eIf you’re planning to grind and polish your concrete floor, proper surface preparation is key. We also offer \u003ca href=\"https:\/\/protradewarehouse.com.au\/collections\/hire-concrete-floor-grinder-sydney\" target=\"_blank\" title=\"Hire Concrete Floor Grinder \u0026amp; Floor Preparation Equipment\" rel=\"noopener\"\u003efloor grinder and dust extractor hire\u003c\/a\u003e services across Sydney and nearby areas—giving you access to the right equipment to complete the job efficiently and achieve a professional finish.\u003c\/p\u003e\u003chr style=\"border: none; height: 3px; background-color: #ffd401;\"\u003e","products":[{"product_id":"sikafloor-curehard-24-floor-sealer","title":"Sikafloor Curehard 24 - 20ltr","description":"\u003cp\u003eSikafloor CureHard-24 is a one part, clear sodium silicate based liquid to harden and provide an impregnating seal fresh on hardened concrete.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eUSES\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eSikafloor CureHard-24 may only be used by experienced professionals.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal old or new concrete surfaces, where a hard surface with light to moderate abrasion resistance is required e.g. warehouses, industrial plants, stores, shopping malls, parking structures, service stations, hangars etc.\u003c\/li\u003e\n\u003cli\u003eas an impregnating sealer  on concrete slabs where no specific curing efficiency or standards are required\u003c\/li\u003e\n\u003cli\u003eSuitable for interior or exterior applications as an impregnating sealer.\u003c\/li\u003e\n\u003cli\u003eAs a densifier in the process of grinding and polishing concrete.\u003c\/li\u003e\n\u003cli\u003eDust-proofing of prefabricated concrete elements.\u003c\/li\u003e\n\u003cli\u003eSuitable for protection against ingress (Principle 1, method 1.2 of EN 1504-9)\u003c\/li\u003e\n\u003cli\u003eSuitable for physical resistance (Principle 5, method 5.2 of EN 1504-9)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eCHARACTERISTICS AND ADVANTAGES\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReady to use\u003c\/li\u003e\n\u003cli\u003eEasy to apply\u003c\/li\u003e\n\u003cli\u003eImproved chemical and abrasion resistance compared to untreated concrete\u003c\/li\u003e\n\u003cli\u003eReduced dusting of concrete floors\u003c\/li\u003e\n\u003cli\u003eVery low VOC\u003c\/li\u003e\n\u003cli\u003eNon-yellowing\u003c\/li\u003e\n\u003cli\u003eGood penetration - designed to pentrate, not provide a surface seal\u003c\/li\u003e\n\u003cli\u003eSolvent free\u003c\/li\u003e\n\u003cli\u003eColourless and odourless\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOUR\u003c\/strong\u003e\u003cbr\u003eClear liquid\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePACKAGING\u003c\/strong\u003e\u003cbr\u003e20L\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSUBSTRATE QUALITY\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eSurfaces must be sound, open textured, clean, free from frost, laitance, surface water, oils, grease, coatings, all loosely adhering particles and other surface contaminants. If in doubt apply a test area first.\u003c\/p\u003e\n\u003cp\u003eNote that Sikafloor CureHard-24 used a a general sealer will not penetrate burnished or fully polished concrete and is not suitable for this appliction.\u003cbr\u003eFor best results with new concrete floors wait for 7–14 days after placement or until after cement has sufficiently hydrated prior to treatment with Sikafloor® CureHard-24.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSUBSTRATE PREPARATION\u003c\/strong\u003e\u003cbr\u003eThe substrate must be prepared by suitable cleaning method such as high pressure water cleaning or by ride-on cleaning machines. Allow drying prior to application. All dust, dirt, loose and friable material must be completely removed from all surfaces before application of the product, preferably by brush and \/ or vacuum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONSUMPTION\u003c\/strong\u003e\u003cbr\u003eApprox 0.15–0.25 l\/m2\/coat (4–7 m2\/l\/coat). as a densifier Approx 8-10m2 as a general sealer\/imprenator\u003cbr\u003e*This figure is theoretical and does not include for any additional material required due to surface porosity, surface profile, variations in level and wastage etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAIT TIME TO OVERCOAT\u003cbr\u003e\u003c\/strong\u003eWhere 2 coats are required, to ensure maximum densification, the second coat can be installed 2–4 hours following the first.\u003cbr\u003eAllow previous coats to become tack free before applying additional coats.\u003c\/p\u003e\n\u003ctable style=\"width: 341px;\" height=\"114\" width=\"481\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 129.99px;\"\u003e\u003cstrong\u003eTemperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 197.01px;\"\u003e\u003cstrong\u003eTime\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 129.99px;\"\u003e+5 °C\u003c\/td\u003e\n\u003ctd style=\"width: 197.01px;\"\u003e~ 3.5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 129.99px;\"\u003e+10 °C\u003c\/td\u003e\n\u003ctd style=\"width: 197.01px;\"\u003e~ 3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 129.99px;\"\u003e+20 °C\u003c\/td\u003e\n\u003ctd style=\"width: 197.01px;\"\u003e~ 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 129.99px;\"\u003e+25 °C\u003c\/td\u003e\n\u003ctd style=\"width: 197.01px;\"\u003e~ 1.5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eTimes are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDRYING TIME\u003c\/strong\u003e\u003cbr\u003eThe surface is touch-dry after 2 hours at +20 °C.\u003cbr\u003eMaximum sealing and hardening effect achieved after ~7 days at +20 °C.\u003c\/p\u003e\n\u003cp\u003eAPPLIED PRODUCT READY TO USE\u003c\/p\u003e\n\u003ctable style=\"width: 397px; height: 90px;\" height=\"97\" width=\"499\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 206.948px; height: 19.5938px;\"\u003eSubstrate temperature\u003c\/td\u003e\n\u003ctd style=\"width: 176.052px; height: 19.5938px;\"\u003eFully serviceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 206.948px; height: 19.5938px;\"\u003e+10°C\u003c\/td\u003e\n\u003ctd style=\"width: 176.052px; height: 19.5938px;\"\u003e~ 6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 206.948px; height: 19.5938px;\"\u003e+20°C\u003c\/td\u003e\n\u003ctd style=\"width: 176.052px; height: 19.5938px;\"\u003e~ 5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 206.948px; height: 19.5938px;\"\u003e+30°C\u003c\/td\u003e\n\u003ctd style=\"width: 176.052px; height: 19.5938px;\"\u003e~ 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNote: Times are approximate and will be affected by changing ambient and substrate conditions.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAPPLICATION\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eHardened Concrete | Full hardening - densifying process\u003c\/b\u003e\u003cbr\u003eApply in a continuous film using a high volume low pressure spray unit.\u003cbr\u003eTo ensure maximum penetration, scrub material into the surface with a soft bristle broom or floor-scrubbing machine (min. 30 minutes), until the material begins to gel and becomes slippery. Wet the material slightly with a water spray and rework it into the surface for another 10 to 20 minutes. After this process, rinse the floor and remove any excess material using a squeegee, wet vacuum or mop.\u003cbr\u003eOn porous, rough-textured or broom-finished surfaces, a second coat may be required.\u003cbr\u003eFor large surfaces and higher placing rates, mechanical equipment such as ride-on cleaning machines can be also used to place, brush in and remove the excess material from the surface.\u003cbr\u003eThanks to proceeding chemical reaction the rate of water-tightness increases gradually, whereas maximum sealing and hardening effect occurs earliest after 7 days. Gloss of the surface gradually increases during 30 to 90 days depending upon cleaning frequency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAs a densifier in grind\/polish system\u003c\/strong\u003e\u003cbr\u003eApply Product by spray or squeegee to the surface at the 80 grit stage of grinding. Two applications are recommended. If product is applied at the\u003ca rel=\"noopener\" href=\"https:\/\/protradewarehouse.com.au\/collections\/concrete-polishing\" target=\"_blank\"\u003e polishing stage\u003c\/a\u003e uneven colour may result.  Do not use Sikafloor® CureHard-24 as a final sealer on polished, finished floors as a sealer - it will not penetrate and will result in an unsatisfactory outcome that will have to be stripped off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAs a general sealer\u003c\/strong\u003e\u003cbr\u003eApply with manual spray equipment or roller at a rate of approx 8-10m2 per litre depending on the porosity of the substrate. Apply evenly without any excess product or pooling on the surface. Two coats recommended. Do not allow excess product to remain on the surface - whitening or stickiness of the excess product may occur and leave discolouration. Do not apply as a general sealer on fully burnished\/closed\/dense concrete surfaces as it will be unable to penetrate.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567431364672,"sku":"SF-24-20","price":180.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sikafloorcurehard24-ConcreteHarderner.png?v=1767827525"},{"product_id":"chemforce-forti-kal-potassium-silicate-densifier","title":"Chemforce Forti-Kal Potassium Silicate Densifier","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eForti-Kal™ Potassium Silicate Concrete Densifier\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePure, premium quality potassium silicate\u003c\/li\u003e\n\u003cli\u003eUV and chemically resistant – lasts for decades, even outdoors\u003c\/li\u003e\n\u003cli\u003eWater-based, zero VOC formulation\u003c\/li\u003e\n\u003cli\u003eManufactured in Australia\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eProduct Applications\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch4\u003e1. Anti-Dusting and Curing Treatment for Fresh Concrete\u003c\/h4\u003e\n\u003cp\u003eTo attain full strength, newly poured concrete needs to retain its water content for long enough for the maximum amount of cement to react and form the correct hydrogels to make the maximum number of bonds.\u003cbr\u003eTreating the concrete with penetrating Forti-Kal™ will form CSH hydrogel inside the pores of the concrete, substantially restricting water bleed and evaporation and retaining water so the concrete can cure properly.\u003c\/p\u003e\n\u003ch4\u003e2. Primer \/ Moisture Barrier for Green Concrete\u003c\/h4\u003e\n\u003cp\u003eFreshly poured concrete contains a lot of water which will evaporate and cause coatings to blister and delaminate, salts to redeposit underneath and lift tiles, damp and mould growth under carpeting, insulation matting, wood etc. Therefore 60 days of curing is usually required before applying a coating or floor covering over the fresh slab.\u003cbr\u003eTreating the concrete with penetrating Forti-Kal™ will form CSH hydrogel inside the pores of the concrete, substantially restricting water bleed and evaporation, so coatings and other floor coverings can be immediately applied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e If a 100% membrane is needed against water and water vapour, for example:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eareas where water can pool and sit for extended periods, such as bathrooms\u003c\/li\u003e\n\u003cli\u003eareas where concrete will move and crack over time\u003c\/li\u003e\n\u003cli\u003esurfaces there can be chemical spills\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA suitable acrylic or epoxy class 3 membrane with sufficient elasticity, elongation and chemical resistance is recommended.\u003c\/p\u003e\n\u003ch4\u003e3. Concrete Densifier for Polished Concrete Floors\u003c\/h4\u003e\n\u003cp\u003eForti-Kal™ is a potassium silicate, which has a smaller molecular size than a potassium silicate so can be used to impregnate concrete in the earlier stages of grinding and later stages, after using a 400 grit polishing pad (impregnating twice is recommended for optimal results).\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to Use Forti-Kal™\u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRead full Product Data Sheet before using Forti-Kal™.\u003c\/li\u003e\n\u003cli\u003eTest on an inconspicuous area and allow to dry to check the result.\u003c\/li\u003e\n\u003cli\u003eEnsure the concrete is dry inside before applying. If applying on freshly poured (green) concrete, it is recommended to give the concrete a minimum 2 hours cure time before applying.\u003c\/li\u003e\n\u003cli\u003eApply when surface temperature is above 2°Celsius (36°F) and below 27°Celsius (80°F).\u003c\/li\u003e\n\u003cli\u003eApply generously and evenly with a pump sprayer, so the surface remains glistening wet for at least 2 minutes. \u003cstrong\u003eAVOID POOLING.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDO NOT over apply – all of the product should penetrate without leaving any excess on the surface. If product all penetrates within 5 minutes, apply more.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow Much Forti-Kal™ to Use\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003ea) As a primer \/ curing agent \/ moisture barrier \/ anti-dusting treatment – it is important to get enough product into the pores. \u003cstrong\u003eMinimum 2 coats recommended.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eb) For optimal polished concrete, impregnate twice:\u003c\/p\u003e\n\u003cp\u003ei) First impregnation – after grinding with 80 to 100 grit metal-bond pad. If the first coat penetrates within 5 minutes, apply a second lighter coat (and further coats if necessary).\u003c\/p\u003e\n\u003cp\u003eii) Second impregnation – after 400 grit resin bond pad. If it is not penetrating well, dilute 2 parts Forti-Kal™ to 1 part water. \u003c\/p\u003e\n\u003cp\u003eiii) Allow treated surface to cure for minimum 4 hours before grinding. Forti-Kal™ cures faster than sodium, potassium, lithium densifiers, but longer cure = harder = more shine. \u003c\/p\u003e\n\u003cp\u003eiv) For the best results, try Forti-Col™ new technology colloidal silica densifier.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eCoverage\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication rate per coat:\u003c\/strong\u003e approximately 6 to 15 m² \/ L (240 to 600 square ft \/ G), depending on concrete density and porosity.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eRecommended Dilution\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eForti-Kal™ is ready-to-use out of the container.\u003c\/li\u003e\n\u003cli\u003eFor freshly poured or dense concrete, Forti-Kal™ can be diluted a little more – 2 parts Forti-Kal™ to 1 part water (no more than 1 part Forti-Kal™ to 1 part water).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAppearance\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClear colourless to light straw yellow liquid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Chemforce","offers":[{"title":"5L","offer_id":40715649450048,"sku":"chemforce-forti-kal-potassium-silicate-densifier","price":55.0,"currency_code":"AUD","in_stock":true},{"title":"20L","offer_id":40715649482816,"sku":"chemforce-forti-kal-potassium-silicate-densifier1","price":155.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/ChemforceForti-Kal_PotassiumSilicateDensifier.png?v=1767827526"},{"product_id":"chemforce-forti-grout-polymer-grouting-patching-agent-20l","title":"Chemforce Forti-Grout Polymer Grouting \u0026 Patching Agent 20L","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eChemforce Forti-Grout™ Polymer Grouting \u0026amp; Patching Agent\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003ePremium ready-to-use polymer grouting and patching agent for concrete polishing.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBenefits of Forti-Grout™\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOptimal adhesion\u003c\/li\u003e\n\u003cli\u003eHigh solids, high purity, UV resistant, non-yellowing polymer\u003c\/li\u003e\n\u003cli\u003eOptimised for superior adhesion, filling, bonding and strength\u003c\/li\u003e\n\u003cli\u003eEco-friendly and zero volatile organic compounds (VOC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to Use Forti-Grout™\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch4\u003eGrouting pinholes (up to 3mm) \u0026amp; hairline cracks:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMix well before use.\u003c\/li\u003e\n\u003cli\u003eIt is recommended to grout min 4 hours after your first saturation densification.\u003c\/li\u003e\n\u003cli\u003eYou can use 80 to 150 grit metal pads to grout if you are aiming for a cream finish.\u003c\/li\u003e\n\u003cli\u003eSpray Forti-Grout™ generously for only 1.5m in front of the grinder (it dries fast).\u003c\/li\u003e\n\u003cli\u003eFor better colour matching lightly sprinkle some cement powder over it and broom in quickly.\u003c\/li\u003e\n\u003cli\u003eDon’t delay – grind over it while it is still damp – it dries quickly. If grout is sticking to diamond pads, increase rotational speed.\u003c\/li\u003e\n\u003cli\u003eFor edges apply grout with a paint brush 1 metre in front of the hand grinder. Use a variable speed grinder with a 100 grit soft bond cup disc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePatching wider cracks and larger holes (more than 3mm):\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMix Forti-Grout™ with ready mix cement mortar, which matches the colour of the slab.\u003c\/li\u003e\n\u003cli\u003eUse the same quantity of Forti-Grout™ as recommended quantity of water. For e.g. if cement requires 100mL of water, use 100mL of Forti-Grout™.\u003c\/li\u003e\n\u003cli\u003eUse a suitable spatula to slightly over fill holes and cracks, as it will shrink and also so you can grind it down to slab level so it is flat and seamless.\u003c\/li\u003e\n\u003cli\u003eGive filled areas at least two hours to partially harden before grinding. Heater can be used to speed curing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFilling sandy areas around large aggregate:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWhen very porous large aggregate is used in concrete, water \u0026amp; cement can penetrate into the stones leaving a sandy, rough area around each stone.\u003c\/li\u003e\n\u003cli\u003eUse Forti-Grout™ to fill these areas, NOT densifier, because with little calcium hydroxide in sandy areas, the densifier remains highly water soluble and will wash out over time when floor is cleaned.\u003c\/li\u003e\n\u003cli\u003eLightly sprinkle some ready mix cement powder \/ mortar over it and broom in quickly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eClean-Up and Appearance\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean tools with water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Milky white liquid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Chemforce","offers":[{"title":"Default Title","offer_id":40715649515584,"sku":"CF-FG-20L","price":135.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/ChemforceForti-GroutPolymerGrouting_PatchingAgent.png?v=1767827345"},{"product_id":"chemforce-forti-col-colloidal-silica-densifier","title":"Chemforce Forti-Col Colloidal Silica Densifier","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFORTI-COL™ Concrete Densifier – Colloidal Silica for Polishing, Curing \u0026amp; Sealing\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eColloidal silica is the latest and best technology amongst the silicates:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSmaller molecule size = better penetration and quicker curing.\u003c\/li\u003e\n\u003cli\u003eSmaller particle size = greater surface area with more reactive sites = better CSH (hydrogel) structures inside the pores.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eFormulated with advanced additives to optimize penetration\u003c\/li\u003e\n\u003cli\u003eContains smaller particles than other colloidal densifiers\u003c\/li\u003e\n\u003cli\u003eLower, non-caustic pH is safer for people \u0026amp; surfaces\u003c\/li\u003e\n\u003cli\u003eDoes not break down under UV so lasts for decades, even outdoors\u003c\/li\u003e\n\u003cli\u003eWater-based, zero VOC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eApplications of Forti-Col™ Concrete Densifier\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcrete densifier for polishing:\u003c\/strong\u003e Forti-Col™ is a colloidal silicate with the smallest particle size – smaller than other silicates so it can be used to impregnate concrete in the earlier stages of grinding (after 80 to 100 grit grind) and later stages (after using a 400 grit polishing pad). Impregnating twice – once in the early grinding stages and again after the 400 grit pad, is recommended for optimal results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-dusting and curing treatment for green (freshly poured) concrete:\u003c\/strong\u003e To attain full strength, newly poured concrete needs to retain its water content for long enough for the maximum amount of cement to react and form the correct hydrogels to make the maximum number of bonds. Treating the concrete with penetrating Forti-Col™ will form CSH hydrogel inside the pores of the concrete, substantially restricting water bleed and evaporation so water is retained and the concrete can cure properly. Because Forti-Col™ is more reactive and has more bonding sites per molecule, it builds on itself and forms better hydrogel structures in the pores than other silicates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimer \/ moisture barrier membrane for green concrete:\u003c\/strong\u003e Treating the concrete with penetrating Forti-Col™ will form CSH hydrogel inside the pores of the concrete, substantially restricting water bleed and evaporation so coatings and other floor coverings can be applied immediately. Freshly poured concrete contains a lot of water which evaporates and causes coatings to blister and delaminate, salts to redeposit underneath and lift tiles, damp and mould growth under carpeting, insulation matting, wood etc. So, slabs are usually left to cure for 60 days before installing flooring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e If a 100% membrane is needed against water and water vapour, for example:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e areas where water can pool and sit for extended periods, such as bathrooms\u003c\/li\u003e\n\u003cli\u003e areas where concrete will move and crack over time\u003c\/li\u003e\n\u003cli\u003e surfaces where there can be chemical spills\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ea suitable acrylic or epoxy class 3 membrane with sufficient elasticity, elongation and chemical resistance is recommended.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAvailable Pack Sizes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5L (1.3GAL)\u003c\/li\u003e\n\u003cli\u003e15L (4GAL)\u003c\/li\u003e\n\u003cli\u003e20L (5.3GAL)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to Use Forti-Col™\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e Always test on an inconspicuous area and allow to dry to check the result.\u003c\/p\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAnti-Dusting Treatment Instructions\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the concrete is dry inside before applying. If applying as an anti-dusting \/ treatment on freshly poured (green) concrete, give the concrete a minimum of 2 hours cure time to allow concrete to react and use up most of its water before applying.\u003c\/li\u003e\n\u003cli\u003eApply when surface temperature is above 2°Celsius (36° F) and below 27°Celsius (80°F).\u003c\/li\u003e\n\u003cli\u003eApply generously with a pump sprayer, saturating the surface evenly so it remains glistening wet for at least 5 – 10 minutes. Avoid pooling.\u003c\/li\u003e\n\u003cli\u003eIf all the Forti-Col™ penetrates within 10 minutes, apply a second coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication rate PER COAT:\u003c\/strong\u003e approximately 4 to 10 m²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDO NOT dilute\u003c\/strong\u003e – Forti-Col™ is ready-to-use out of the container. Tap water can reduce its penetrating power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eConcrete Polishing Instructions\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eForti-Col™ is best for the later stages of concrete polishing, after grouting and after 200 grit resin pads, in place of a Lithium Silicate.\u003c\/li\u003e\n\u003cli\u003eFor earlier stages of densification after grinding with 30 to 100 grit metal-bond pads, we recommend Forti-Col EG™ or Forti-Kal™.\u003c\/li\u003e\n\u003cli\u003eApply generously with a pump sprayer, saturating the surface evenly so it remains glistening wet for at least 5 – 10 minutes. Avoid pooling.\u003c\/li\u003e\n\u003cli\u003eIf all the Forti-Col™ penetrates within 10 minutes, apply another coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication rate PER COAT for later densification:\u003c\/strong\u003e approx 6 to 15 m² \/ L (240 to 600 square ft \/ G).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDO NOT dilute\u003c\/strong\u003e – Forti-Col™ is ready-to-use out of the container. Tap water can reduce its penetrating power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Chemforce","offers":[{"title":"5L","offer_id":40715649548352,"sku":"CF-FC-5L","price":72.5,"currency_code":"AUD","in_stock":true},{"title":"20L","offer_id":40715649581120,"sku":"CF-FC-20L","price":240.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/ChemforceForti-Col_ColloidalSilicaDensifier.png?v=1767827225"},{"product_id":"chemforce-forti-col-eg-silica-densifier","title":"Chemforce Forti-Col EG Silica Densifier","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eChemforce Forti-Col EG New Technology Colloidal Silica Densifier\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe ultimate densifier for concrete polishing, anti-dusting and slab curing.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatutres:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColloidal silica is the latest and best technology amongst the silicates.\u003c\/li\u003e\n\u003cli\u003eMinimal (usually zero) colour change with Forti-Col EG™.\u003c\/li\u003e\n\u003cli\u003eContains a high concentration of a range of the smallest nano colloidal particles which means:\n\u003cul\u003e\n\u003cli\u003eDeeper penetration\u003c\/li\u003e\n\u003cli\u003eFast reactivity \u0026amp; curing\u003c\/li\u003e\n\u003cli\u003eMore reactive sites resulting in more complex structures \u0026amp; more SiO\u003csub\u003e2\u003c\/sub\u003e inside the pores for greater density and better polish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMakes concrete polishing much quicker as excess product on the surface does not form a hard, gummy film which takes hours to grind off.\u003c\/li\u003e\n\u003cli\u003eFormulated with advanced additives to optimize penetration.\u003c\/li\u003e\n\u003cli\u003eLower, non-caustic pH is safer for people \u0026amp; surfaces.\u003c\/li\u003e\n\u003cli\u003eDoes not break down under UV so lasts for decades, even outdoors.\u003c\/li\u003e\n\u003cli\u003eWater-based, zero VOC.\u003c\/li\u003e\n\u003cli\u003eMade at our factory in Melbourne, Australia.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eProduct Applications\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch4\u003eConcrete Densifier for Concrete Polishing:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh concentration colloidal silica densifier with the smallest particle sizes – smaller than traditional silicates and other colloidal silica densifiers.\u003c\/li\u003e\n\u003cli\u003eDespite the small particle size and greater penetrating power, the high concentration makes it ideal for EARLY densification after 30 to 100 grit metal grinding pads.\u003c\/li\u003e\n\u003cli\u003eCan be used for later densification after 50 to 400 grit resin pads, but Standard Forti-Col™ is more cost effective for later densification as concrete is less porous and doesn’t usually require a super concentrated product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eConcrete Slab Curing and Anti-Dusting:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHighly concentrated which makes it ideal to treat fresh slabs to minimize water evaporation and optimize concrete curing.\u003c\/li\u003e\n\u003cli\u003eTrowelled slabs should be trowelled with Forti-Trowel™ and then treated with Forti-Col EG™.\u003c\/li\u003e\n\u003cli\u003eForti-Trowel™ is formulated with special colloidal particles with a delayed reaction time so it doesn’t interfere with the initial reaction of the cement and hardening of the concrete, while improving trowelling and creating a tighter pore structure on the surface of the concrete.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to Use\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e Always test on an inconspicuous area and allow to dry to check the result.\u003c\/p\u003e\n\u003ch4\u003eSlab Curing \u0026amp; Anti-Dusting Treatment:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the concrete is dry inside before applying. If applying on freshly poured (green) concrete, give the concrete a minimum of 2 hours cure time to allow concrete to react and use up most of its water before applying.\u003c\/li\u003e\n\u003cli\u003eApply when surface temperature is above 2°C (36°F) and ideally below 32°C (90°F).\u003c\/li\u003e\n\u003cli\u003eApply generously with a pump sprayer, saturating the surface evenly so it remains glistening wet for at least 5–10 minutes. Avoid pooling.\u003c\/li\u003e\n\u003cli\u003eIf all the Forti-Col EG™ fully penetrates within 10 minutes, apply a second coat.\u003c\/li\u003e\n\u003cli\u003eDO NOT dilute – Forti-Col EG™ is ready-to-use out of the container. Tap water can reduce its penetrating power.\u003c\/li\u003e\n\u003cli\u003eApplication rate per coat: approximately 4 to 10 m²\/L. Application rate will be lower if applying to a trowelled concrete surface, particularly if trowelled using Forti-Trowel™.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eConcrete Polishing:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBest choice for the earlier stages of densification when concrete is rough and pores are very open – after grinding with 30 to 80 grit metal-bond pads.\u003c\/li\u003e\n\u003cli\u003eCan also be used for later densification – recommended after 200 resin pads, but can be used after 50 to 200 grit resin pads. Standard Forti-Col™ is more cost effective for later densification.\u003c\/li\u003e\n\u003cli\u003eApply generously with a pump sprayer, saturating the surface evenly so it remains glistening wet for at least 5–10 minutes. Avoid pooling.\u003c\/li\u003e\n\u003cli\u003eIf all the Forti-Col EG™ penetrates within 10 minutes, apply a second coat.\u003c\/li\u003e\n\u003cli\u003eApplication rate per coat: approximately 4 to 10 m²\/L for early densification.\u003c\/li\u003e\n\u003cli\u003eDO NOT dilute – Forti-Col EG™ is ready-to-use out of the container. Tap water can reduce its penetrating power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAppearance\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Clear to slightly opaque, colourless to light straw yellow liquid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDownload Datasheet for full application details.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Chemforce","offers":[{"title":"5L","offer_id":40715759255616,"sku":"CH-FCEG-5","price":85.0,"currency_code":"AUD","in_stock":true},{"title":"20L","offer_id":40715759288384,"sku":"CH-FCEG-20","price":295.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/ChemforceForti-ColEGSilicaDensifier.png?v=1767827345"},{"product_id":"chemforce-forti-trowel-colloidal-silica-trowelling-aid","title":"Chemforce Forti-Trowel Colloidal Silica Trowelling Aid","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eChemforce Forti-Trowel – Advanced Colloidal Silica Trowelling \u0026amp; Finishing Aid\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eForti-Trowel™ is a premium new-technology colloidal silica trowelling and finishing aid designed for freshly poured concrete slabs. This product enhances trowelling performance, improves surface quality, and optimizes slab curing while being safe, eco-friendly, and UV-resistant.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eKey Benefits of Forti-Trowel\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpecial spherical nano-silica particles lubricate the wet concrete surface for smoother trowelling.\u003c\/li\u003e\n\u003cli\u003eEnables quicker helicopter trowelling with a superior finish.\u003c\/li\u003e\n\u003cli\u003eReduces stickiness in low water content, plasticised, and pozzolan-enriched concrete for cleaner, easier roller screeding.\u003c\/li\u003e\n\u003cli\u003eCreates complex silicate structures in the outer concrete layer, resulting in smaller pores and slower water evaporation.\u003c\/li\u003e\n\u003cli\u003eMay extend trowelling time in warm weather (not recommended for pouring above 32 °C).\u003c\/li\u003e\n\u003cli\u003eFor optimal curing, apply Forti-Col EG™ to the trowelled surface 2–4 hours after pouring.\u003c\/li\u003e\n\u003cli\u003eLower, non-caustic pH – safer for workers and surfaces.\u003c\/li\u003e\n\u003cli\u003eWater-based, UV-resistant, and zero VOC formulation.\u003c\/li\u003e\n\u003cli\u003eProudly manufactured in Melbourne, Australia.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to Use Forti-Trowel\u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eApply a generous, even coat of Forti-Trowel™ over the freshly poured concrete using a pump sprayer and begin trowelling immediately.\u003c\/li\u003e\n\u003cli\u003eWhen using a roller screed, spray evenly before screeding to reduce sticking and improve results.\u003c\/li\u003e\n\u003cli\u003eHelicopter trowel as usual, spraying additional Forti-Trowel™ in areas where performance needs improvement.\u003c\/li\u003e\n\u003cli\u003eDo not dilute – product is ready-to-use at optimal concentration. Adding tap water may reduce effectiveness.\u003c\/li\u003e\n\u003cli\u003eFor prefabricated concrete panels, consider spraying the trowelled face and all other sides with Forti-Col EG™ for enhanced curing, densification, and anti-dusting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eImportant Safety Tips\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eYour trowel will glide more easily over the surface – work slowly near edges to avoid overshooting the slab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownload Datasheets for full application details. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Chemforce","offers":[{"title":"5L","offer_id":40715759321152,"sku":"CH-TC-5","price":52.0,"currency_code":"AUD","in_stock":true},{"title":"20L","offer_id":40715759353920,"sku":"CH-TC-20","price":185.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/ChemforceForti-Trowel.png?v=1767827285"},{"product_id":"chemforce-fortifier-plus","title":"Chemforce Fortifier Plus","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eChemforce Fortifier Plus \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003ePremium protection from salt spalling \u0026amp; freeze-thaw spalling. Superior protection for very porous building materials, including natural stone, which are exposed to saltwater or freeze-thaw conditions.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBenefits of Fortifier Plus\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFortified Plus has 2 main uses: Premium protection from salt spalling and freeze-thaw spalling for softer, very porous natural stone, brick and concrete in a salt water or freeze-thaw environment (e.g. around a salt water swimming pool).\u003c\/li\u003e\n\u003cli\u003ePremium quality, breathable water repellent for terraces, paths, walls, cladding and pool surrounds which Nano consolidation of very porous stones can increase strength by up to 40%.\u003c\/li\u003e\n\u003cli\u003ePremium water-repelling silane provides optimal protection against water ingress.\u003c\/li\u003e\n\u003cli\u003eProtects against picture framing and efflorescence, reduces mould growth and water-based staining, makes maintenance easier and keeping surfaces looking good.\u003c\/li\u003e\n\u003cli\u003eVery small sealing molecules are up to 500 x smaller than competing technologies and penetrate deeply into pores to create a substantial water repellent and strengthened layer.\u003c\/li\u003e\n\u003cli\u003eOptimized to form permanent bonds inside the pores of various types of porous stones, concrete, brick, grout and other very porous materials.\u003c\/li\u003e\n\u003cli\u003eNon film-forming and retains natural colour.\u003c\/li\u003e\n\u003cli\u003eKeeps surfaces looking new for longer, makes cleaning easier.\u003c\/li\u003e\n\u003cli\u003eFully breathable, allowing water vapor to escape freely, avoiding harmful moisture build-up inside the material.\u003c\/li\u003e\n\u003cli\u003eDesigned for indoor (for e.g. bathrooms, wet rooms and showers) and for outdoor surfaces on residential and commercial projects which require premium water repellence.\u003c\/li\u003e\n\u003cli\u003eNegligible change to slip resistance when applied according to our written instructions and guidelines.\u003c\/li\u003e\n\u003cli\u003eHigh resistance to alkaline (high pH) environments. Concrete is highly alkaline\/base and can severely shorten the life of other technologies.\u003c\/li\u003e\n\u003cli\u003eHighly UV resistant.\u003c\/li\u003e\n\u003cli\u003e15 Year Performance Warranty when applied according to our guidelines by an Approved Applicator who records the project in our online warranty system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE:\u003c\/strong\u003e While Fortifier Plus can substantially increase the life of stone, brick or concrete in a salt water or freeze-thaw environment it cannot turn a pig’s ear into a silk purse – i.e. if a stone or other material is too soft, too porous or too friable, it should not be used in a salt water or freeze-thaw environment and Fortifier Plus may not be enough to stop it from deteriorating quickly.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSuitable Surfaces\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSalt-water or mineral pool surrounds.\u003c\/li\u003e\n\u003cli\u003eTerraces, paths, walls, stone cladding, all pool surrounds – wherever premium water repellence is desirable.\u003c\/li\u003e\n\u003cli\u003eHorizontal and vertical surfaces, including building envelopes (verticals), saltwater pool surrounds, cladding, pavers, blockwork, brickwork.\u003c\/li\u003e\n\u003cli\u003eAppropriate for new and restored natural stone and other porous building materials, including: Travertine, sandstone, limestone, marble, precast concrete, cast stone, Saltillo, terracotta, grout, concrete pavers, concrete blockwork and very porous bricks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePLEASE NOTE:\u003c\/strong\u003e For indoor and outdoor entertaining areas where oil repellence is needed, seal with \u003ca rel=\"noopener\" href=\"https:\/\/protradewarehouse.com.au\/products\/chemforce-stain-protector-5l?_pos=1\u0026amp;_psq=stain+pro\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003eStain Protector\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eAppropriate for new and restored materials, including: Travertine, sandstone, limestone, precast concrete, cast stone, Saltillo, terracotta, grout, concrete blockwork and very porous bricks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHow to Use\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24-hour cure time to determine the ease of application and desired results. Note: Fortifier Plus takes 2 to 4 weeks to fully cure inside the pores of the material and reach maximum hardness.\u003c\/li\u003e\n\u003cli\u003eWear suitable solvent-resistant gloves, protective clothing, safety goggles and an organic vapour respirator during application.\u003c\/li\u003e\n\u003cli\u003eEnsure surfaces to be treated are dry, clean and free of residues.\u003c\/li\u003e\n\u003cli\u003eSurface temperature should be 40 – 95°Fahrenheit \/ 5 – 35°Celsius.\u003c\/li\u003e\n\u003cli\u003eProduct is not to be diluted \/ thinned.\u003c\/li\u003e\n\u003cli\u003eMask or otherwise protect surrounding surfaces such as window frames from overspray. If they receive overspray, clean immediately with clean, dry white cotton or other suitable absorbent cloths. Alcohol, methylated spirits or acetone can be used, taking care not to damage paintwork or other coatings.\u003c\/li\u003e\n\u003cli\u003eOn very porous materials, apply the product using a low-pressure sprayer with a fan spray nozzle, working from the lowest sections upwards. On dense surfaces, such as marble, apply with a natural bristle brush or lamb’s wool applicator. If you use a brush or applicator made from synthetic material, test to ensure it is not dissolved by Fortifier Plus™.\u003c\/li\u003e\n\u003cli\u003eHorizontal surfaces: Apply 2 generous coats, at least 10 minutes apart. For the best results, wait longer between coats, but it is important to apply each coat before the previous coat has dried.\u003c\/li\u003e\n\u003cli\u003eVertical surfaces: To minimize dripping and running it is best to apply 4 lighter coats rather than 2 heavy coats and to begin at the bottom of a surface and work upwards.\u003c\/li\u003e\n\u003cli\u003eThe material must be allowed to cure for at least 2 weeks before it comes into contact with salt water or solvents.\u003c\/li\u003e\n\u003cli\u003eTotal application rate (total of all coats) varies widely depending on the material, porosity and finish: 4 to 12 sq. m. per litre (160 – 480 sq. ft. per gallon).\u003c\/li\u003e\n\u003cli\u003eThoroughly polish off any excess product residue on the surface with clean, white absorbent cloths before the final coat dries.\u003c\/li\u003e\n\u003cli\u003eClean equipment with methylated spirits, alcohol or acetone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMPORTANT – DIP SEALING:\u003c\/strong\u003e Surface materials which are in regular contact with salt water, including the splash zone around salt water pools, must be dip sealed prior to installation to achieve the best result. The material must be fully submerged for a minimum of 15 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eLimitations \u0026amp; Technical\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWARNING:\u003c\/strong\u003e Fortifier Plus™ will not prevent acid etching or physical wear of the surface. Fortifier Plus™ increases the strength of the surface by up to 40% – this may not be enough to make a very soft, unsuitable stone fit for purpose in a salt water or freeze-thaw environment.\u003c\/li\u003e\n\u003cli\u003eFortifier Plus™ is breathable, so will not resist static water pressure and should not be used as a waterproof membrane.\u003c\/li\u003e\n\u003cli\u003eYield: 3 to 7 sq m. per litre (120 – 280 sq. ft. per Gallon).\u003c\/li\u003e\n\u003cli\u003eTechnical data – Active Content: \u0026gt;50%; SG: ~0.89; VOCs \u0026gt;400g\/L; Pack sizes: 5L (1.3G) = 4.8Kg, 20L (5.3G) = 19Kg; Typical Penetration: 5 – 20mm depending on application rate and surface porosity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDownload datasheets for full application information.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Chemforce","offers":[{"title":"1L","offer_id":40717642629184,"sku":"CH-FP-1","price":75.0,"currency_code":"AUD","in_stock":true},{"title":"5L","offer_id":40717642661952,"sku":"CH-FP-5","price":230.0,"currency_code":"AUD","in_stock":true},{"title":"20L","offer_id":40717642694720,"sku":"CH-FP-20","price":850.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/chemforce-fortifier-plus-1L--5L-and-20L.png?v=1767827465"},{"product_id":"crommelin-lithium-densifier-15l-clear","title":"Crommelin Lithium Densifier 15L Clear","description":"\u003ch2 data-start=\"124\" data-end=\"190\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eConcrete Hardener and Dust Proofer\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp data-start=\"192\" data-end=\"610\"\u003eCrommelin Lithium Densifier is the perfect solution for enhancing the strength and durability of concrete surfaces. This premium densifier and hardener is specially formulated to increase abrasion resistance and dustproofing, making your concrete surfaces more durable, attractive, and long-lasting. It’s the ideal choice for anyone looking to quickly and economically improve the performance of their concrete floors.\u003c\/p\u003e\n\u003cp data-start=\"612\" data-end=\"910\"\u003eLithium Densifier’s lithium silicate formula penetrates deep into concrete to form insoluble calcium silicate hydrate, densifying the concrete from within. This unique formula increases surface strength up to six times and improves the appearance and light reflectance of both new and old concrete.\u003c\/p\u003e\n\u003ch3 data-start=\"912\" data-end=\"934\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-start=\"935\" data-end=\"1354\"\u003e\n\u003cli data-start=\"935\" data-end=\"998\"\u003eImproves the performance and appearance of concrete surfaces.\u003c\/li\u003e\n\u003cli data-start=\"999\" data-end=\"1054\"\u003eIncreases concrete surface strength by up to 6 times.\u003c\/li\u003e\n\u003cli data-start=\"1055\" data-end=\"1117\"\u003eOne-step application with no scrubbing or flushing required.\u003c\/li\u003e\n\u003cli data-start=\"1118\" data-end=\"1189\"\u003eBreathable and UV stable; will not yellow, discolour, peel, or flake.\u003c\/li\u003e\n\u003cli data-start=\"1190\" data-end=\"1240\"\u003eLow VOC, non-toxic, non-flammable, and low odor.\u003c\/li\u003e\n\u003cli data-start=\"1241\" data-end=\"1292\"\u003eTreated surfaces are ready for use within 1 hour.\u003c\/li\u003e\n\u003cli data-start=\"1293\" data-end=\"1354\"\u003eSuitable for polishing and speeds up the polishing process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1356\" data-end=\"1391\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSuitable Surfaces \u0026amp; Substrates:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-start=\"1392\" data-end=\"1402\"\u003e\n\u003cli data-start=\"1392\" data-end=\"1402\"\u003eConcrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1404\" data-end=\"1426\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eLocations for use:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-start=\"1427\" data-end=\"1561\"\u003e\n\u003cli data-start=\"1427\" data-end=\"1444\"\u003eConcrete Floors\u003c\/li\u003e\n\u003cli data-start=\"1445\" data-end=\"1456\"\u003eCar Parks\u003c\/li\u003e\n\u003cli data-start=\"1457\" data-end=\"1474\"\u003eDomestic Floors\u003c\/li\u003e\n\u003cli data-start=\"1475\" data-end=\"1486\"\u003eFactories\u003c\/li\u003e\n\u003cli data-start=\"1487\" data-end=\"1496\"\u003eGarages\u003c\/li\u003e\n\u003cli data-start=\"1497\" data-end=\"1515\"\u003eShopping Centres\u003c\/li\u003e\n\u003cli data-start=\"1516\" data-end=\"1527\"\u003eShowrooms\u003c\/li\u003e\n\u003cli data-start=\"1528\" data-end=\"1546\"\u003eWarehouse Floors\u003c\/li\u003e\n\u003cli data-start=\"1547\" data-end=\"1561\"\u003eExterior Use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Crommelin","offers":[{"title":"Default Title","offer_id":40754645860416,"sku":"CM-LD-15-C","price":245.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Crommelin-Lithium-Densifier.jpg?v=1767827524"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/collections\/Concrete_densifiers_category_thumbnail.jpg?v=1767847415","url":"https:\/\/protradewarehouse.com.au\/collections\/concrete-densifiers\/densifier_colloidal-silica.oembed","provider":"Protrade Warehouse | Trade \u0026 DIY Supplies Australia-Wide","version":"1.0","type":"link"}