{"title":"Cementitious Grouts","description":"","products":[{"product_id":"sikagrout-212-hp-structural-grout","title":"SikaGrout 212 HP High Strength Non Shrink Cementitious Grout - 20KG Bag","description":"\u003cp\u003eSikaGrout-212 HP is a high-performance, cementitious, non-shrink grout that expands in two stages (plastic and hardened) to counteract shrinkage. It offers high early and 28-day strengths, flowable consistency, and is designed not to segregate or bleed. Suitable for applications from 10mm to 100mm. Available from ProTrade Warehouse across Australia.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eUses\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eSikaGrout 212HP is used for flowable grouting applications such as machine baseplates, anchor bolts, bridge bearing pads and shear key grouting, pre-cast concrete sections, cavities, gaps, and recesses requiring high performance.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eCharacteristics \/ Advantages\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShrinkage compensating properties (non-shrink grout as per CRD-C 621-81).\u003c\/li\u003e\n\u003cli\u003eHigh early strengths.\u003c\/li\u003e\n\u003cli\u003eHigh 28 day strengths.\u003c\/li\u003e\n\u003cli\u003eFlowable consistency.\u003c\/li\u003e\n\u003cli\u003eAdjustable consistency.\u003c\/li\u003e\n\u003cli\u003eFormulated to not segregate or bleed.\u003c\/li\u003e\n\u003cli\u003eExcellent impact and thermal resistance.\u003c\/li\u003e\n\u003cli\u003eNon corrosive to steel or iron.\u003c\/li\u003e\n\u003cli\u003eLab tested in accordance with AS 1478.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eProduct Information\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20 kg bag\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e 9 months.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage conditions:\u003c\/strong\u003e Store in dry conditions in unopened original packaging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance and colour:\u003c\/strong\u003e Grey concrete in appearance\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum grain size:\u003c\/strong\u003e Maximum aggregate size is 1mm for pumping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDensity:\u003c\/strong\u003e ~ 2,200 kg\/m³ approx. (dependent on water addition rate)\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eImportant Considerations\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStrength values are average laboratory results and may vary on-site due to environment and curing.\u003c\/li\u003e\n\u003cli\u003eRefer to Sika Grouting Method Statement for detailed application guidelines.\u003c\/li\u003e\n\u003cli\u003eStore in dry conditions in unopened original packaging.\u003c\/li\u003e\n\u003cli\u003eNever apply to a dry substrate.\u003c\/li\u003e\n\u003cli\u003eTrials are recommended when adding Sika admixtures.\u003c\/li\u003e\n\u003cli\u003eSika Ferrogard-901 can be added to enhance steel reinforcement protection.\u003c\/li\u003e\n\u003cli\u003eFor dry pack consistency, use Sika Grout-GP.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eApplication Instructions\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch4\u003eEquipment\u003c\/h4\u003e\n\u003cp\u003eSikaGrout®-212 HP must be mechanically mixed using a mechanical grout mixer or a suitable drum mixer. The grout mixer will reduce the chances of the mix becoming lumpy or aerated. Smaller quantities should be mixed in clean drum using an electric drill and spiral drill and spiral mixer at a speed of approximately 500 rpm. DO NOT MIX BY HAND.\u003c\/p\u003e\n\u003ch4\u003eSubstrate Quality\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Prep:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCorrect and thorough surface preparation is essential to achieve the high performance qualities of SikaGrout®-212 HP.\u003cbr\u003eAll surfaces must be clean, sound and free from dust, ice, oils, grease or other surface contaminants such as curing membranes and form release agent etc. Bolt holes and fixing pockets should be free of dirt and debris by air blasting. For maximum bond, surfaces should be abraded or roughened, preferably by mechanical means such as needle gun, grit blasting, grinding etc.\u003cbr\u003eAll prepared surfaces must be saturated with water several hours prior to grouting, ensuring it is free of any surface water or puddles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFormwork:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe formwork used must be leak proof to allow for free flowing SikaGrout®-212 HP. The formwork should be arranged so that the grout head is maintained on the side above the level of the underside of the base plate. This will allow gravity flow to completely fill the void to be grouted.\u003cbr\u003eFormwork should be coated with form oil to allow easy removal of forms. Ensure adequate air holes are provided.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTemperature Control:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTemperature affects setting time and rate of increase for strength. For optimum performance maintain grout, concrete and\/or steel substrates within the range of 18-25 °C prior to, during, and for 48 hours after placement of the grout.\u003c\/p\u003e\n\u003ch4\u003eMixing\u003c\/h4\u003e\n\u003cp\u003ePlace about 70–80 % of the premeasured clean water (depending on consistency required – refer to “Mix Ratio”) into a clean container and gradually add the whole bag of SikaGrout®-212 HP into it while continuously mixing. Add the remaining water until the desired consistency is obtained. Mix for 3–5 minutes with a low speed drill (500 rpm max.). Allow to stand so any entrapped air can escape. Do not add more water to increase flow of the grout if a mix has stiffened due to time delays. If the grout is unworkable discard.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eSikaGrout-212 HP can be placed by gravity flow or by pump. It is essential that proper placing on the job site is practised to ensure placement is completed without problems. Sufficient labour, grout and equipment must be present to ensure continuous placement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGravity Flow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMixed grout should be poured one side of the void to avoid air entrapment. Grout is best poured over short distances to ensure this. Use a suitable header box, maintaining the grout head at all times to ensure continuous flow. To facilitate grout compaction and top plate contact, use rodding, tamping or flexible strapping in short strokes while maintaining an adequate head of grout. Do not vibrate as this will cause segregation. Any adjacent machinery or equipment causing vibration should be shut down until initial set (5 to 6hours).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePumping\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhen pumping SikaGrout-212 HP, ensure the pump is suitable for the grout consistency and for the distance and height it is to be pumped. A positive displacement pump is recommended. Place grout by pumping into the farthest corner, filling the space gradually. Ensure that air is not entrapped under the base plate.\u003c\/p\u003e\n\u003cp\u003eGet SikaGrout-212 HP high-strength grout from ProTrade Warehouse. Collect from any Sika warehouse or our Silverwater store. Delivery available Australia wide.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567431888960,"sku":"212-HP-20","price":37.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/SikaGrout_212_HP.png?v=1767827525"},{"product_id":"sikagrout-gp-au-cementitious-grout","title":"SikaGrout GP Cementitious Grout - 20kg","description":"\u003cp\u003eSikaGrout GP AU is a pumpable, shrinkage-compensated, flowable cementitious \"Class A\" grout with an extended working time, designed for general purpose grouting applications across Australia. ProTrade Warehouse offers this easy-to-mix and apply Sika grout.\u003c\/p\u003e\n\u003ch3\u003eUses\u003c\/h3\u003e\n\u003cp\u003eSuitable for general purpose grouting, machine foundations, anchor bolts, precast grouting, and filling cavities, gaps, and recesses. For precision grouting, SikaGrout-212HP is recommended.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to mix and apply\u003c\/li\u003e\n\u003cli\u003eFlowable consistency (according to mix)\u003c\/li\u003e\n\u003cli\u003eRapid strength development\u003c\/li\u003e\n\u003cli\u003eNon-corrosive and non-toxic\u003c\/li\u003e\n\u003cli\u003eIron and chloride free\u003c\/li\u003e\n\u003cli\u003eShrinkage-compensated\u003c\/li\u003e\n\u003cli\u003eGood pumping properties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20 kg bag\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e 9 months from the date of production\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage conditions:\u003c\/strong\u003e Dry conditions, +10 °C to +35 °C in original, unopened packaging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance and colour:\u003c\/strong\u003e Grey premixed powder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum grain size:\u003c\/strong\u003e Dmax: 0.4 mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDensity:\u003c\/strong\u003e ~ 2.2 kg\/l (depending on consistency and temperature)\u003c\/p\u003e\n\u003ch3\u003eApplication Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eConsumption:\u003c\/strong\u003e Approximate 90-96 bags per 1.0 m³ depending on consistency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYield:\u003c\/strong\u003e Stiff: 10.4 litres, Plastic: 10.6 litres, Flowable: 11.1 litres per 20 kg bag.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e Stiff \u0026amp; Plastic: 10 mm min. \/ 100 mm max.; Flowable: 10 mm min. \/ 50 mm max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmbient air temperature:\u003c\/strong\u003e +10 °C min. \/ +35 °C max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing ratio (Water per 20 kg bag):\u003c\/strong\u003e Stiff: 2.9 - 3.0 litres, Plastic: 3.2 - 3.4 litres, Flowable: 4.0 - 4.6 litres (guide only).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate temperature:\u003c\/strong\u003e +10 °C min. \/ +35 °C max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePot Life:\u003c\/strong\u003e 30 mins approx.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSetting time (at 23 °C):\u003c\/strong\u003e Initial Set: ~ 3 hrs, Final Set: ~ 4 hrs 45 mins (AS 2350.4:2006).\u003c\/p\u003e\n\u003ch3\u003eImportant Considerations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLower temperatures slow setting and strength development.\u003c\/li\u003e\n\u003cli\u003e\"Non-shrink\" properties are most effective when water loss is prevented.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Instructions\u003c\/h3\u003e\n\u003ch4\u003eSubstrate quality \/ pre-treatment\u003c\/h4\u003e\n\u003cp\u003ePrepare substrate mechanically (high pressure water, grit blasting, etc.). Absorbent surfaces must be saturated with clean water but free of standing water. Concrete, mortar, and stone must be sound, clean, and free of contaminants. Metal surfaces should be clean and free of scale, rust, oil, and grease.\u003c\/p\u003e\n\u003ch4\u003eMixing\u003c\/h4\u003e\n\u003cp\u003eAdd 70-80% of clean water to a clean container and gradually add the entire bag of SikaGrout GP AU while mixing. Add remaining water to achieve desired consistency. Mix for 3-5 minutes with a low speed drill (max. 500 rpm).\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eStir lightly after mixing to release trapped air. Pour immediately into prepared formwork, maintaining sufficient pressure head for baseplate grouting. For large areas, maintain continuous flow; pumping with heavy-duty diaphragm, screw feed, or piston pumps is possible. For sections \u0026gt; 100 mm, mix with up to 1 part 10 mm silt-free aggregates to 1 part grout by weight. Use breather holes and steel rods\/chains to aid flow if needed. Preliminary trials are recommended.\u003c\/p\u003e\n\u003ch4\u003eCuring treatment\u003c\/h4\u003e\n\u003cp\u003eLeave formwork for at least 3 days. Upon removal, cure exposed surfaces immediately with Antisol curing compound or other approved methods.\u003c\/p\u003e\n\u003ch4\u003eCleaning of equipment\u003c\/h4\u003e\n\u003cp\u003eClean tools with water immediately after use. Hardened material can only be removed mechanically.\u003c\/p\u003e\n\u003cp\u003eOrder SikaGrout GP AU for your general purpose grouting needs in Australia from ProTrade Warehouse. This Class A, shrinkage-compensated grout offers easy application and rapid strength gain. \u003c\/p\u003e\n\u003cp\u003eGet your SikaGrout GP AU today from ProTrade Warehouse. For your convenience, you can collect from any Sika warehouse location or directly from our Silverwater store. We also offer delivery Australia wide.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567432314944,"sku":"BE783B","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/SikaGrout_GP_AU.png?v=1767827525"},{"product_id":"sikagrout-hes-structural-grout","title":"Sika Grout HES High Early Strength Structural Grout - 20kg","description":"\u003cp\u003eSika Grout HES is a ready-mixed, high-quality, Class C shrinkage-compensated grout that sets rapidly with high early strength gain. ProTrade Warehouse, as a trusted Sika distributor, offers Sika Grout HES at competitive trade prices for applications requiring fast strength development.\u003c\/p\u003e\n\u003ch3\u003eUses\u003c\/h3\u003e\n\u003cp\u003eSikaGrout HES is used in a wide range of applications where rapid strength and return to service is required, such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine base plates\u003c\/li\u003e\n\u003cli\u003eAnchoring\u003c\/li\u003e\n\u003cli\u003eStarter bars\u003c\/li\u003e\n\u003cli\u003eBridge bearing pads\u003c\/li\u003e\n\u003cli\u003ePre-cast panel grouting\u003c\/li\u003e\n\u003cli\u003eCavities, gaps and recesses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh early strengths (even at low temperatures).\u003c\/li\u003e\n\u003cli\u003eHigh 28-day strengths.\u003c\/li\u003e\n\u003cli\u003eGood flow characteristic.\u003c\/li\u003e\n\u003cli\u003eRapid set times.\u003c\/li\u003e\n\u003cli\u003eAdjustable consistency.\u003c\/li\u003e\n\u003cli\u003eDoes not segregate or bleed.\u003c\/li\u003e\n\u003cli\u003eHigh impact and thermal resistance.\u003c\/li\u003e\n\u003cli\u003eNon-corrosive to steel or iron.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20kg bag\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e 9 months\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage conditions:\u003c\/strong\u003e Stored in a dry, unopened original containers protected from direct sunlight and frost.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance and colour:\u003c\/strong\u003e Grey Powder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum grain size:\u003c\/strong\u003e Maximum particle size for pumping ~2.0mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDensity:\u003c\/strong\u003e ~2,200 kg\/m³ approx. (dependent on water addition rate)\u003c\/p\u003e\n\u003ch3\u003eApplication Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eYield:\u003c\/strong\u003e Trowellable ~ 10.3 litres per 20kg bag, Flowable ~ 10.7 litres per 20kg bag\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e min. 10mm \/ 150mm @ 23°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlowability:\u003c\/strong\u003e ~ 70 sec (Flow Cone - Flowable consistency)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing ratio:\u003c\/strong\u003e Flowable consistency add 3.2 to 3.5 litres of water per 20 kg bag. Trowellable consistency add 2.5 to 2.8 litres of water per 20kg bag.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePot Life:\u003c\/strong\u003e ~ 20 minutes at 23 °C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSetting time (AS 2350.4:2006 at 23 °C):\u003c\/strong\u003e Initial Set ~ 25 mins, Final Set ~ 30 mins\u003c\/p\u003e\n\u003ch3\u003eImportant Considerations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not mix SikaGrout HES with any Portland cement-based materials.\u003c\/li\u003e\n\u003cli\u003eFor detailed information on grouting application and guidelines, refer to Sika Grouting Method Statement.\u003c\/li\u003e\n\u003cli\u003eStore SikaGrout HES in dry conditions in unopened original packaging.\u003c\/li\u003e\n\u003cli\u003eNever apply to a dry substrate.\u003c\/li\u003e\n\u003cli\u003eTrials should always be conducted SikaGrout HES to determine performance under local conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Instructions\u003c\/h3\u003e\n\u003ch4\u003eSubstrate Quality \/ Pre-treatment\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eConcrete:\u003c\/strong\u003e Correct and thorough surface preparation is essential to achieve the high-performance qualities of SikaGrout HES. All surfaces must be clean, sound and free from dust, ice, oils, grease or other surface contaminants such as curing membranes and form release agent etc. Bolt holes and fixing pockets should be free of dirt and debris by air blasting. For maximum bond, surfaces should be abraded or roughened, preferably by mechanical means such as needle gun, grit blasting, grinding etc. All prepared surfaces must be saturated with water several hours prior to grouting, ensuring it is free of any surface water or puddles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFormwork:\u003c\/strong\u003e Where formwork is to be used, all formwork must be of adequate strength, treated with release agent and sealed to prevent leakage of pre-wetting water and grout. Ensure formwork includes outlets for removal of the pre-soaking water if vacuum extraction equipment to remove water will not be used. For manual grout application, a header box or hopper must be constructed on one side of the formwork so that a grout head can be maintained during the grouting operation.\u003c\/p\u003e\n\u003ch4\u003eMixing\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eEquipment:\u003c\/strong\u003e Sika Grout HES must be mixed using a mechanical grout mixer or a suitable drum mixer. The grout mixer will reduce the mix becoming lumpy or aerated. Smaller quantities should be mixed in a clean drum using an electric drill. i.e. Festo or similar spiral mixer at a speed of approximately 500RPM. DO NOT MIX BY HAND or MIX PART BAGS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMethod:\u003c\/strong\u003e Add approx. 70% of water to 20kg pail, slowly add powder while mixing to wet out product fully, add remaining water at a steady rate while continuing to mix. Continue to mix for an additional 3-5 mins. Do not add more water to increase flow if material has stiffened due to time delays on resting, remixing can reactivate. If grout is unworkable discard.\u003c\/p\u003e\n\u003cp\u003eThe aggregate shape, and the quantity added, will effect the workability of the mix. Smooth rounded aggregate is found to produce the most workable mix. The recommended maximum aggregate addition rate is 20kg per 20kg bag of Sika Grout HES. The other option will be to add Sika Grout Aggregate to the mix to increase the thickness of the grout placed.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eSika Grout HES can be placed by gravity flow or by pump. It is essential that proper placing is completed without problems. Sufficient labour, grout and equipment must be present to ensure continuous placement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGravity Flow:\u003c\/strong\u003e Mixed grout should be poured one side of the void to avoid air entrapment. Grout is best poured over short distances to ensure this. Use a suitable header box, maintaining the grout head at all times to ensure continuous flow. To facilitate grout compaction and top plate contact, use rodding, tamping or flexible strapping in short strokes while maintaining an adequate head of grout. Do not vibrate as this will cause segregation. Any adjacent machinery or equipment causing vibration should be shut down until initial set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePumping:\u003c\/strong\u003e When pumping Sika Grout HES, ensure the pump is suitable for the grout consistency and for the distance and height it is to be pumped. A positive displacement pump is recommended. Place grout by pumping into the farthest corner, filling the space gradually. Ensure that air is not entrapped under the base plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlacement Thickness:\u003c\/strong\u003e Minimum thickness is 10 mm. Maximum thickness in one pass is 150 mm. Any grout pour that exceeds this should be done in stages, or have stone aggregate added to it, to reduce the exothermic heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAggregate Addition:\u003c\/strong\u003e Coarse aggregate can be added to mixed SikaGrout HES to achieve a stronger grout, to increase the thickness of grout placed in one pass, or to increase yield. It is recommended that aggregate size be 10 mm, however as a guide the maximum aggregate size should not be more than 1\/5 of the thickness of the section to be cast.\u003c\/p\u003e\n\u003ch4\u003eCuring Treatment\u003c\/h4\u003e\n\u003cp\u003eSuitable curing methods such as plastic sheet, wet hessian, curing compounds (eg, Sika Film for initial placement then Sika Antisol curing compounds after initial set) etc. must be used to protect the freshly applied grout from the drying effects of sun and wind. Curing must commence immediately after placement, and continue for at least 7 days. Curing is vital to the ultimate performance of grout as it allows optimum strength development and ensures tight contact with the baseplate.\u003c\/p\u003e\n\u003ch4\u003eCleaning of Equipment\u003c\/h4\u003e\n\u003cp\u003eRemove uncured Sika Grout-HES from tools and equipment with water. Hardened material can only be removed mechanically.\u003c\/p\u003e\n\u003cp\u003eOrder Sika Grout HES High Early Strength Structural Grout from ProTrade Warehouse for your rapid setting and high-strength structural grouting needs. Benefit from our trade prices and fast Australia-wide delivery, with convenient pickup options available.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567433756736,"sku":"SG-HES-20","price":60.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sika_Cementitious_Grout_Sikagrout_HES.png?v=1767827345"},{"product_id":"sikagrout-deep-pour","title":"SikaGrout Deep Pour Cementitious Grout - 20kg","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHigh Strength, Shrinkage Compensating Grout for Deep Pours up to 500mm\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSikaGrout Deep Pour is a ready-mixed, high-quality Portland cement grout designed for deep pour applications up to 500mm. It features a unique two-stage expansion mechanism (Class A and C) to counteract shrinkage, achieves high early and 28-day strengths, and offers excellent flow characteristics.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eUses:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMass grouting\/concreting\u003c\/li\u003e\n\u003cli\u003eMachine bedplates\u003c\/li\u003e\n\u003cli\u003eAnchor bolts\u003c\/li\u003e\n\u003cli\u003eBridge bearing pads\u003c\/li\u003e\n\u003cli\u003ePre-cast concrete sections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShrinkage compensating properties\u003c\/li\u003e\n\u003cli\u003eHigh early strengths\u003c\/li\u003e\n\u003cli\u003eHigh 28 day strengths\u003c\/li\u003e\n\u003cli\u003eGood flow characteristics\u003c\/li\u003e\n\u003cli\u003eAdjustable consistency\u003c\/li\u003e\n\u003cli\u003eGood impact and thermal resistance\u003c\/li\u003e\n\u003cli\u003eNon-corrosive to steel or iron\u003c\/li\u003e\n\u003cli\u003eLab tested in accordance with AS 1478.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComposition: Cement, selected aggregates and special additives\u003c\/li\u003e\n\u003cli\u003ePackaging: 20 kg bags\u003c\/li\u003e\n\u003cli\u003eAppearance and colour: Grey powder\u003c\/li\u003e\n\u003cli\u003eMaximum grain size: Dmax: 4.0 mm\u003c\/li\u003e\n\u003cli\u003eFresh mortar density: ~ 2,300 kg\/m³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio:\u003c\/strong\u003e 2.5 - 2.8 litres of water for 20kg powder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYield:\u003c\/strong\u003e 20 kg of powder yields approximately 9.8 litres of grout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e min. 20 mm \/ max. 500 mm (for \u0026gt; 500 mm, add clean aggregate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlowability:\u003c\/strong\u003e ~ 500 mm (Flow trough)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot Life (at +20°C):\u003c\/strong\u003e ~30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetting time (at 23°C):\u003c\/strong\u003e Initial Set ~ 4 hrs 40 mins, Final Set ~ 7 hrs 45 mins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Instructions:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate Quality \/ Pre-treatment:\u003c\/strong\u003e Surfaces must be clean, sound, and free of contaminants. Roughen surfaces for maximum bond. Saturate surfaces with water several hours prior to grouting, ensuring no standing water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing:\u003c\/strong\u003e Mechanically mix a full bag with 2.5 - 2.8 litres of water for 3-5 minutes until lump-free. Do not exceed maximum water amount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Can be placed by gravity flow or pump. Pour from one side to avoid air entrapment. Maintain grout head for continuous flow. Rodding or tamping can aid compaction. Cure for at least 7 days using appropriate methods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning of Equipment:\u003c\/strong\u003e Clean all tools with water immediately after use. Hardened material can only be removed mechanically.\u003c\/p\u003e\n\u003cp\u003eNeed a reliable grout for deep pours? SikaGrout Deep Pour offers exceptional strength and shrinkage compensation.\u003c\/p\u003e\n\u003cp\u003e Get unbeatable trade prices and fast nationwide shipping on all Sika products. Pick up your order from our store, Sika Wetherill Park in Sydney, or any Sika warehouse nationwide. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567437787200,"sku":"2CBCC4","price":50.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/sikagroutDeeppour.png?v=1767827345"},{"product_id":"sikagrout-300pt-cement-grout","title":"SikaGrout 300PT AU - High Performance Cementitious Grout - 20KG","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSand-Free, Zero Bleed Grout for Post-Tensioning Applications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSikaGrout-300 PT AU is a non-shrink (Class A and C), cementitious grout designed for post-tensioning applications. Its unique 2-phase shrinkage compensating mechanism ensures excellent performance in filling and repairing voids within ducts of post-tensioned structures.\u003c\/p\u003e\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal and vertical grouting of ducts within bonded, post-tensioned structures.\u003c\/li\u003e\n\u003cli\u003eGrouting and filling or repairing voids within ducts of post-tensioning strands for corrosion protection.\u003c\/li\u003e\n\u003cli\u003eGrouting with tight clearance requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCharacteristics \/ Advantages:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSand-free: Allows filling and repairing of voids within ducts of post-tensioned structures.\u003c\/li\u003e\n\u003cli\u003eDoes not contain aluminium powder or any components which generate hydrogen gas, carbon dioxide or oxygen.\u003c\/li\u003e\n\u003cli\u003eSilica fume enhanced for low permeability.\u003c\/li\u003e\n\u003cli\u003eEasy to use, just add water.\u003c\/li\u003e\n\u003cli\u003eNon-metallic, will not stain or rust.\u003c\/li\u003e\n\u003cli\u003eZero bleeding, even at high flow.\u003c\/li\u003e\n\u003cli\u003eLow heat build-up.\u003c\/li\u003e\n\u003cli\u003eExcellent for pumping. Does not segregate even at high flow.\u003c\/li\u003e\n\u003cli\u003eNon-corrosive, does not contain chlorides.\u003c\/li\u003e\n\u003cli\u003eSuperior freeze\/thaw resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApprovals \/ Certificates:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRMS B113- Post Tensioning of Concrete\u003c\/li\u003e\n\u003cli\u003eRMS R56 Ground Anchors\u003c\/li\u003e\n\u003cli\u003eRMS R64 Soil Nailing\u003c\/li\u003e\n\u003cli\u003eDept Transport Qld (TMR )- Product Index for bridges and other Structures Section 5. Registered and Conforming Products Part 5.30 Post Tensioning Grout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposition:\u003c\/strong\u003e Portland cement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20 kg bags\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e ~ 2.0 kg\/litre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum grain size:\u003c\/strong\u003e None (sand free)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Information (Typical values @ 23°C):\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e1 day: ~ 15 MPa\u003c\/li\u003e\n\u003cli\u003e7 days: ~ 55 MPa\u003c\/li\u003e\n\u003cli\u003e28 days: ~ 65 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrinkage:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e1 day: 0 - 0.1%\u003c\/li\u003e\n\u003cli\u003e28 days: 0 - 0.2%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion:\u003c\/strong\u003e \u0026lt; 2% after 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBleeding:\u003c\/strong\u003e \u0026lt;0.5%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio:\u003c\/strong\u003e 6.6 litres of water per 20kg bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYield:\u003c\/strong\u003e 1 bag yields approx. 12.4 - 13.6 litres of grout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot Life:\u003c\/strong\u003e ~ 60 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Instructions:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate Quality \/ Pre-treatment:\u003c\/strong\u003e Ensure ducts are clean and free of debris. Remove contaminants from surfaces. Concrete should be sound and roughened. Surface should be SSD (saturated surface dry) prior to application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing:\u003c\/strong\u003e Use a colloidal mixer or high speed drill (2500 rpm) with a Sika® jiffy paddle. Mix for approximately 3 minutes. Add 5.4 litres of water per 20kg bag initially, adding up to 6.6 litres to achieve desired flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Grout must be used within 60 minutes of mixing. Ensure complete filling of ducts. Experienced, trained technicians are highly recommended for critical elements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning of Equipment:\u003c\/strong\u003e Clean all tools and equipment with water immediately after use. Hardened\/cured material can only be mechanically removed.\u003c\/p\u003e\n\u003cp\u003eReady to purchase? Pick up from our store, Sika Wetherill Park in Sydney, or any Sika warehouse nationwide. We also offer convenient online ordering with delivery across Australia.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567437951040,"sku":"1CE7BC","price":62.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/SikaGrout_300PT_AU.png?v=1767827285"}],"url":"https:\/\/protradewarehouse.com.au\/collections\/cementitious-grouts\/brand_sika.oembed","provider":"Protrade Warehouse | Trade \u0026 DIY Supplies Australia-Wide","version":"1.0","type":"link"}