{"title":"Sika Cement Levelling Systems","description":"","products":[{"product_id":"sikafloor-050-ramp-and-patch","title":"Sikafloor 050 Ramp and Patch 20kg","description":"\u003cp\u003eSikafloor-050 Ramp and Patch is a fast setting ramping \/ patching mortar used for internal \u0026amp; external concrete surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUSES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplied by its self, or part of a system with suitable materials from Sikafloor®, Sikadur® SikaBond, SikaTite \u0026amp; Davco ranges\u003c\/li\u003e\n\u003cli\u003eRamping\/grading to create a smooth transition between two types of flooring\u003c\/li\u003e\n\u003cli\u003ePatching damaged concrete floors, stairs, \u0026amp; walls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS AND ADVANTAGES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery Low VOC (1 grams per litre)\u003c\/li\u003e\n\u003cli\u003eRapid drying\u003c\/li\u003e\n\u003cli\u003eInternal \u0026amp; external applications\u003c\/li\u003e\n\u003cli\u003eNon-combustible\u003c\/li\u003e\n\u003cli\u003eFast setting\u003c\/li\u003e\n\u003cli\u003eSmooth flat surface is achievable\u003c\/li\u003e\n\u003cli\u003eHigh early strength 24hrs = 28 - 30MPa\u003c\/li\u003e\n\u003cli\u003eWalkable in as little as 40 - 50 minutes\u003c\/li\u003e\n\u003cli\u003eInstallation of flooring in 60-90 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOUR\u003c\/strong\u003e\u003cbr\u003eGrey Powder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePACKAGING\u003c\/strong\u003e\u003cbr\u003e20kg Bag - 48 bags per pallet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEQUIPMENT\u003c\/strong\u003e\u003cbr\u003eHigh speed heavy duty electric drill and mixing paddle. Suitable size bucket\/vessel - 20L +\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING\u003c\/strong\u003e\u003cbr\u003eMix the entire 20kg bag of powder with 4.1 - 4.3 Litres of clean, cool water. Slowly add powder to the water while mixing with a suitable electric drill and mixing paddle. Thoroughly mix for only 1 minutes to a lump free consistency and apply directly. Not mixing for the recommended time or additional water may result in product irregularities and possible product failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003cbr\u003eUsing Sikafloor-050 Ramp and Patch prior to floor coverings:\u003cbr\u003eRamping:\u003cbr\u003eOnce product is mixed immediately apply and begin working to heights required. Product can be worked\/shaped\/shaved with the back of a trowel up to 20 minutes after application.\u003c\/p\u003e\n\u003cp\u003eUsing Sikafloor 050 Ramp and Patch to repair concrete:\u003cbr\u003ePatching concrete\u003cbr\u003eOn a well prepared clean and roughened concrete surface a bonding primer is generally not required, but pre-dampening of the surface with\u003cbr\u003ewater is recommended. After water has been applied and allowed to soak the concrete surface should achieve a dark matt appearance without\u003cbr\u003eglistening and surface pores and pits shall not contain water. The surface shall not be allowed to completely dry before application of Sikafloor®-050 Ramp and Patch. If priming is preferred first diluted Sikafloor® 01 Primer 1:3 with water then apply by way of a brush till all areas have been coated and allow to dry. Once placed, a trowel is used to pack \u0026amp; shape Sikafloor 050 Ramp and Patch into the concrete void. Sikafloor 050 Ramp and Patch can also be left high of the finished surface required and shaved using the trowel until full set. Working time 15 - 20 min @ 23°C. Note: Freshly applied Sikafloor®-050 Ramp and Patch must be protected from damp, condensation and all forms of water while curing for at least 24 hours.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567431430208,"sku":"050-SF-20","price":66.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sikafloor_050_Ramp_and_Patch.png?v=1767827585"},{"product_id":"sikafloor-level-ultra","title":"Sikafloor Level Ultra - 20 KG","description":"\u003cp\u003eSikafloor Level Ultra is a Fiber Reinforced Self Levelling Compound that can be applied on exterior or interior concrete substrates.\u003c\/p\u003e\n\u003cp\u003eWe are Sika's Authorised Distributor and have access to all Sika's products. Contact us for a free quote\u003c\/p\u003e\n\u003ch3\u003eUSES of Sikafloor Level Ultra\u003c\/h3\u003e\n\u003cp\u003eApplied in combination with suitable materials from Sikafloor, SikaBond, Sikadur, SikaTite \u0026amp; Davco ranges.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended underlayment for all Commercial \u0026amp; Domestic floor coverings\u003c\/li\u003e\n\u003cli\u003eSuitable to be applied prior to Sikafloor® epoxy or polyurethane colour coatings, in light to medium traffic areas (retail, commercial \u0026amp; car parks)\u003c\/li\u003e\n\u003cli\u003eLevelling of new or old concrete substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCHARACTERISTICS AND ADVANTAGES of Sikafloor Level Ultra\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFiber reinforced\u003c\/li\u003e\n\u003cli\u003eVery Low VOC (~1 gram per litre)\u003c\/li\u003e\n\u003cli\u003eGreen star certified\u003c\/li\u003e\n\u003cli\u003eHigh flexural strength\u003c\/li\u003e\n\u003cli\u003eHigh compressive strength\u003c\/li\u003e\n\u003cli\u003eUnderfloor heating suitable\u003c\/li\u003e\n\u003cli\u003eFast drying - Install tiles after 5-6hrs \u0026amp; moisture sensitive flooring after 7-8hrs @ 23°C\u003c\/li\u003e\n\u003cli\u003eHighly fluid with great self-healing properties\u003c\/li\u003e\n\u003cli\u003eSimply mix \u0026amp; apply - No slaking or re-mixing required\u003c\/li\u003e\n\u003cli\u003ePump or manual application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePACKAGING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e20kg Bag\u003c\/p\u003e\n\u003cp\u003ePallet = 48 bags\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567431659584,"sku":"SF-LU-20","price":57.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sikafloor_Level_Ultra.png?v=1767827465"},{"product_id":"sikafloor-level-top","title":"Sikafloor Level TOP - Self Levelling \u0026 Smoothing Compound - 20kg","description":"\u003cp\u003eSikafloor Level TOP is a high-flowing self-levelling underlayment designed to level concrete substrates before the installation of various floor coverings. It boasts very low VOC content, is Green Star certified, and offers excellent self-healing properties. Simply mix and apply – no slaking or re-mixing is needed. Ideal for large floor applications with a good pot life and working time, suitable for pump or manual application. Available from ProTrade Warehouse across Australia.\u003c\/p\u003e\n\u003ch3\u003eUses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApplied in combination with suitable materials from Sikafloor, SikaBond, Sikadur, SikaTite \u0026amp; Davco ranges.\u003c\/li\u003e\n\u003cli\u003eRecommended underlayment for all commercial \u0026amp; residential floorcoverings.\u003c\/li\u003e\n\u003cli\u003eLevelling of uneven concrete.\u003c\/li\u003e\n\u003cli\u003eSuitable for new or old internal concrete substrates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVery Low VOC (3 Grams per litre).\u003c\/li\u003e\n\u003cli\u003eGreen star certified.\u003c\/li\u003e\n\u003cli\u003eGreat self-healing properties.\u003c\/li\u003e\n\u003cli\u003eSimply mix \u0026amp; apply - No slaking or re-mixing required.\u003c\/li\u003e\n\u003cli\u003eDesigned for large floor applications.\u003c\/li\u003e\n\u003cli\u003eGood pot life and working time (18 minutes at 23°C).\u003c\/li\u003e\n\u003cli\u003ePump or manual application.\u003c\/li\u003e\n\u003cli\u003eHighly fluid with excellent flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eComposition:\u003c\/strong\u003e Polymer modified cement compound\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20kg Bag - 64 bags per pallet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance and colour:\u003c\/strong\u003e Grey powder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e Unopened bags can be stored for up to 12 months in a cool, dry and weatherproof environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage conditions:\u003c\/strong\u003e Bags must be stored off the floor. Avoid sitting bags in direct sunlight prior to application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.24kg\/m³\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolatile organic compound (VOC) content:\u003c\/strong\u003e 3 Grams per litre.\u003c\/p\u003e\n\u003ch3\u003eApplication Information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio:\u003c\/strong\u003e 5 - 5.2 Litres of clean, cool water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYield:\u003c\/strong\u003e 12L - 4m² @ 3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e 1 - 30mm (neat), 10 - 50mm (bulked with 1-2mm aggregate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient air temperature:\u003c\/strong\u003e 10°C - 35°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot Life:\u003c\/strong\u003e 18 minutes @ 23°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaiting time to overcoating:\u003c\/strong\u003e Allow 18 hours at 23°C prior to the application of impervious floor coverings. Drying is dependent on thickness of application, temperature, air flow \u0026amp; relative humidity. Increased air flow will help with drying speeds in cooler temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitial set time:\u003c\/strong\u003e 55-95 minutes at 23°C \u0026amp; 50% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal set time:\u003c\/strong\u003e 60-100 minutes at 23°C \u0026amp; 50% relative humidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations of Use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not install over particleboard, hardwood floors, parquet floors or metal. Suitable for concrete substrates only.\u003c\/li\u003e\n\u003cli\u003eDo not mix or apply below 10°C and above 35°C and under hot and windy conditions.\u003c\/li\u003e\n\u003cli\u003eKeep product cool prior to mixing and do not leave bags in direct sun for extended periods.\u003c\/li\u003e\n\u003cli\u003eProtect from hot or strong winds and extremes of temperature for 12hrs after being applied.\u003c\/li\u003e\n\u003cli\u003eAll construction\/expansion joints in existing concrete must be reflected through subsequent floor coverings.\u003c\/li\u003e\n\u003cli\u003eDo not use on sloped surfaces requiring drainage (wet areas) or in exterior applications.\u003c\/li\u003e\n\u003cli\u003eSikafloor® Level TOP is an underlayment and not designed to be left exposed. Apply a suitable floor covering once dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Instructions\u003c\/h3\u003e\n\u003ch4\u003eEquipment\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh speed heavy duty electric drill with stirrer attachment\u003c\/li\u003e\n\u003cli\u003eSuitable size bucket - 20Lt+\u003c\/li\u003e\n\u003cli\u003ePurpose built mechanical pump\u003c\/li\u003e\n\u003cli\u003eMulti-bag mixing station\u003c\/li\u003e\n\u003cli\u003ePersonal protective equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSubstrate Quality\u003c\/h4\u003e\n\u003cp\u003eConcrete floors should be fully cured, structurally sound, clean, dry, and free of surface contaminates and dust for Eg. Concrete must be porous and accept water penetration.\u003cbr\u003eTest by lightly sprinkling water on various areas of the substrate. If water penetrates, then a good bond with a selected primer can be achieved. If water beads and fails to be absorbed by the concrete surface contaminants are present then loss of adhesion may occur.\u003cbr\u003eContaminates that are present should be mechanically removed before installation.\u003cbr\u003eConcrete must be free of efflorescence and not subject to hydrostatic pressure. If the concrete substrate has efflorescence or high moisture (RH) and moisture sensitive flooring is being installed Sikafloor® Moisture Barrier System may be considered (Sikafloor®-158 W Fast Barrier + Sikafloor®-14 Prep N Prime + Sikafloor® Level Top).\u003cbr\u003eContact your local Sika® office for further information.\u003c\/p\u003e\n\u003ch4\u003ePriming\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRefer to the primer product data sheet for additional specific instructions\u003c\/li\u003e\n\u003cli\u003eChosen primer shall be completely dry prior to the application of SikaFloor ® Levelling Systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePorous Priming\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSikafloor® 01 Primer @ 1:1 - 1:2 - 1:3 with water\u003cbr\u003eor\u003cbr\u003e▪ Sikafloor® Level Pro Primer - undiluted (Neat)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Correct amount of priming liquid should always be applied to the prepared substrate giving good penetration and film build. Thin applications may result in pinholing or debonding levelling compound from the substrate. Do Not Allow primer to pool while drying. On particularly porous (mechanically prepared) surfaces or where the initial prime coat absorbs immediately a second coat is recommended. Average dry time ~20–30 min (per coat)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Porous Priming\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSikafloor®-14 Prep N Prime – undiluted (Neat)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: When applying primer to Non-porous surface use a paint roller and apply one thin even coat.\u003cbr\u003eSikafloor®-14 Prep N Prime Must Be Completely Dry (50 min+) prior to applying Sikafloor® products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Moisture Content Concrete Priming\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSikaFloor® 158 Fast Barrier followed by SikaFloor®-14 Prep N Prime\u003c\/li\u003e\n\u003cli\u003eApply the SikaFloor®- 158 Fast Barrier and allow to dry. Then apply a single coat of SikaFloor®-14 Prep N Prime and allow to dry prior to subsequent application of Sikafloor® Level TOP.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMixing\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNot mixing for the recommended time or additional water may result in product finish irregularities and possible failure.\u003c\/li\u003e\n\u003cli\u003eOnly mix Sikafloor® Level TOP in full bags and not part bags.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Bag Mixing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMix the entire 20kg bag of powder with 5 - 5.2 Litres of clean, cool water. Slowly add powder to the water while mixing with a suitable electric drill and mixing paddle. Thoroughly mix at high speed for 2 minutes to a lump free consistency.\u003c\/p\u003e\n\u003cp\u003eWhen extending the Sikafloor® Level TOP with aggregate (bulking out purposes) add 10kg of clean 1-2mm aggregate with 20kg of Sikafloor® Level TOP and Thoroughly mix at high speed for 2 minutes to a lump free consistency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti Bag mixing Station\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePre-measure the correct amount of water for the number of bags being mixed. Add the water to the mixing station then slowly add the powder to the water while mixing. Ensure the product is thoroughly mixed for a minimum of 2 minutes from the last bag added to the mixing station.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePump Machine Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnsure pump machines are calibrated to avoid over watering of the mixture.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003ePour or Pump Sikafloor® Level Top, then spread with a long handled gauged spreader or trowel to heights as required. Sikafloor® Level Top will seek its own level during the first 12 minutes. For touch-ups, use a flat steel trowel.\u003cbr\u003eFor best results use a spike roller as necessary.\u003c\/p\u003e\n\u003ch4\u003eCleaning Of Equipment\u003c\/h4\u003e\n\u003cp\u003eTools and equipment can be cleaned with water product the the material drying.\u003c\/p\u003e\n\u003cp\u003eGet Sikafloor Level TOP self-levelling compound from ProTrade Warehouse. Collect from any Sika warehouse or our Silverwater store. Delivery available Australia wide.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"350\" height=\"350\" src=\"https:\/\/www.youtube.com\/embed\/4lE81uPfA64\" title=\"Sika Applied Series: Sikafloor Level TOP\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567432118336,"sku":"SL-20-KG","price":46.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sikafloor_Level_TOP.png?v=1767827585"},{"product_id":"sikafloor-158-w-fast-barrier","title":"Sikafloor 158 W Fast Barrier","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSikafloor 158 W Fast Barrier - Rapid Drying Hydrostatic Moisture \u0026amp; Incontinence Barrier\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSikafloor-158 W Fast Barrier is a fast-drying, 2-component, water-based epoxy resin forming a permanent barrier against hydrostatic pressure and incontinence. Suitable for concrete on grade, green concrete, and consolidating weak surfaces. This very low VOC, Green Star certified product is available from ProTrade Warehouse for experienced professionals across Australia.\u003c\/p\u003e\n\u003ch3\u003eUses\u003c\/h3\u003e\n\u003cp\u003eEffectively stops rising moisture in concrete (even green concrete), provides an incontinence barrier for aged and healthcare facilities, consolidates weakened or damaged concrete surfaces, and is compatible with Sikafloor epoxy flooring systems and SikaBond wood flooring adhesives.\u003c\/p\u003e\n\u003ch3\u003eCharacteristics \/ Advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVery Low VOC (4 g\/L)\u003c\/li\u003e\n\u003cli\u003eVery Low Moisture Vapour Transmission (3.7 gm\/m²\/24hrs as per ASTM E96)\u003c\/li\u003e\n\u003cli\u003eWater-based and user-friendly with very low odour during application\u003c\/li\u003e\n\u003cli\u003eGreen Star Certified\u003c\/li\u003e\n\u003cli\u003eSingle coat application on most substrates\u003c\/li\u003e\n\u003cli\u003eSolvent-free and Non DG storage\u003c\/li\u003e\n\u003cli\u003eExcellent penetration into porous construction materials\u003c\/li\u003e\n\u003cli\u003eEasy 2:1 mix ratio (A:B by weight)\u003c\/li\u003e\n\u003cli\u003eRapid drying: 2-3 hours at 23°C\u003c\/li\u003e\n\u003cli\u003eHighly fluid and easy to apply with a roller\u003c\/li\u003e\n\u003cli\u003eResists up to 4 bar negative water pressure\u003c\/li\u003e\n\u003cli\u003eSuitable for use with underfloor heating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eComposition:\u003c\/strong\u003e 2-Component, water-based epoxy resin\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 4.2kg kit (2.8kg Part A \u0026amp; 1.4kg Part B - 3.9L) and 18kg kit (12kg Part A \u0026amp; 6kg Part B - 16.66L)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e 15 months from the date of production\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage conditions:\u003c\/strong\u003e Cool, dry conditions between +5 °C and +35 °C, protected from direct sunlight and freezing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance and colour:\u003c\/strong\u003e Wet - White, Cured - Transparent (CLEAR)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDensity (mixed):\u003c\/strong\u003e ~1.08 kg\/l\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVOC Content:\u003c\/strong\u003e 4 grams per litre\u003c\/p\u003e\n\u003ch3\u003eApplication Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMixing ratio (Component A : Component B by weight):\u003c\/strong\u003e 2:1\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsumption:\u003c\/strong\u003e 4-6 m²\/L on smooth concrete or cement-based compounds. Mechanically profiled or very porous surfaces may require a second coat at 6-8 m²\/L. Average consumption depends on substrate absorbency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate temperature:\u003c\/strong\u003e +10°C min. \/ +30°C max.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePot Life:\u003c\/strong\u003e +15°C: 40 min, +23°C: 30 min, +30°C: 15 min. Mix only what can be used within the pot life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaiting time to overcoating:\u003c\/strong\u003e Minimum 2 hours at +23 °C with suitable Sika primers, adhesives, or a second coat of Sikafloor-158 W Fast Barrier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplied product ready for use:\u003c\/strong\u003e 2 hours+\u003c\/p\u003e\n\u003ch3\u003eImportant Considerations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOvercoating should ideally occur as soon as the primer is dry, but within 24 hours. Abrade, vacuum, and wipe with clean water if this is exceeded.\u003c\/li\u003e\n\u003cli\u003ePrevent dust contamination before subsequent applications. Sand and re-apply if contamination occurs or if the initial coat exceeds 24 hours.\u003c\/li\u003e\n\u003cli\u003eProtect from freezing at all times.\u003c\/li\u003e\n\u003cli\u003eConstruction joints require pre-treatment with Sikadur or Sikafloor epoxy resins (static cracks) or elastomeric materials\/movement joints (dynamic cracks).\u003c\/li\u003e\n\u003cli\u003eProtect freshly applied material from damp, condensation, and water for at least 24 hours.\u003c\/li\u003e\n\u003cli\u003eDo not dilute under any circumstances.\u003c\/li\u003e\n\u003cli\u003eWhen used with SikaBond wood floor adhesives, do not broadcast with sand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Instructions\u003c\/h3\u003e\n\u003ch4\u003eEquipment\u003c\/h4\u003e\n\u003cp\u003eA low-speed electric drill with a mixing paddle is required for the 18kg kit. Use a ~10mm nap roller for application.\u003c\/p\u003e\n\u003ch4\u003eSubstrate Quality \/ Pre-treatment\u003c\/h4\u003e\n\u003cp\u003eThe substrate must be fully cured, structurally sound, clean, dry, and free of surface contaminants like curing compounds, efflorescence, and dust. It needs to be porous, allowing water penetration (test by sprinkling water). If water beads, contaminants are present and must be mechanically removed before application.\u003c\/p\u003e\n\u003ch4\u003eMixing\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e4.2kg kit:\u003c\/strong\u003e Plug Component B upright into Component A until empty, then close the cap and shake thoroughly for at least 1 minute, re-shaking if the mixture is not homogeneous.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e18kg kit:\u003c\/strong\u003e Pour Part A into Part B (2:1 ratio) and mix with a low-speed electric drill and paint mixer type paddle for 2-3 minutes until a homogeneous mix is achieved. Scrape the sides and bottom of the pails to ensure thorough mixing. Insufficiently mixed material will not cure properly.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eApply one generous coat of Sikafloor-158 Fast Barrier to the porous substrate using a ~10mm nap roller, ensuring a continuous, wet reflective (CLEAR) appearance over the entire surface. On very porous or mechanically prepared surfaces, a second coat is recommended after a minimum of 2 hours. Ensure the first coat has a wet reflective appearance; if it absorbs immediately, re-apply directly.\u003c\/p\u003e\n\u003ch4\u003eCleaning of Equipment\u003c\/h4\u003e\n\u003cp\u003eClean all tools and application equipment with water immediately after use.\u003c\/p\u003e\n\u003cp\u003eGet the rapid-drying Sikafloor-158 W Fast Barrier from ProTrade Warehouse. Collect from any Sika warehouse or our Silverwater store. Delivery available Australia wide.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"350\" height=\"350\" src=\"https:\/\/www.youtube.com\/embed\/l2dYD5GxLSI\" title=\"Sika Applied Series - Sikafloor 158 W Fast Barrier\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Sika","offers":[{"title":"4.2Kg","offer_id":40567432249408,"sku":"BEB65A-42-KG","price":255.0,"currency_code":"AUD","in_stock":true},{"title":"18kg","offer_id":40567432282176,"sku":"BEB65A-18-KG","price":725.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sikafloor_158_W_Fast_Barrier.png?v=1767827225"},{"product_id":"sikafloor-level-pro-finish","title":"Sikafloor Level Pro Finish - 9kg","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSikafloor Level PRO Finish - Self Priming Finishing \u0026amp; Smoothing Cement\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSikafloor Level PRO Finish is a fast-drying, self-priming skim coat that provides a smooth, flat surface when dry. ProTrade Warehouse, as a trusted Sika distributor, offers this product at competitive trade prices.\u003c\/p\u003e\n\u003ch3\u003eUses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApplied in combination with suitable materials from Sikafloor, SikaBond, Sikadur, SikaTite \u0026amp; Davco ranges.\u003c\/li\u003e\n\u003cli\u003eInstalled as a skim coat over internal concrete substrates, masonite underlay, or CFC sheeting prior to subsequent flooring materials.\u003c\/li\u003e\n\u003cli\u003eCan be used on walls and floors to smooth roughened\/damaged concrete.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCharacteristics \/ Advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVery low VOC\u003c\/li\u003e\n\u003cli\u003eGreen star certified\u003c\/li\u003e\n\u003cli\u003eHigh moisture tolerance\u003c\/li\u003e\n\u003cli\u003eSuitable for castor wheel loadings\u003c\/li\u003e\n\u003cli\u003eNon-combustible\u003c\/li\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003eSelf-priming on smooth trowel finish concrete\u003c\/li\u003e\n\u003cli\u003eApplied from feather edge up to 4mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eComposition:\u003c\/strong\u003e Polymer modified cement compound\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 9kg (3x3kg) Pail - 64 per pallet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e Unopened packaging can be stored for up to 24 months in a cool, dry, and weatherproof environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage conditions:\u003c\/strong\u003e Pails must be stored off the floor. Avoid sitting product in direct sunlight prior to application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAppearance and colour:\u003c\/strong\u003e Grey powder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWater absorption:\u003c\/strong\u003e Porous\u003c\/p\u003e\n\u003ch3\u003eApplication Information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMixing ratio:\u003c\/strong\u003e 1.4 - 1.5 Litres of clean, cool water per 3kg of powder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsumption:\u003c\/strong\u003e 25-30m² can be reached with 3kg when applying as a skim coat over a smooth porous concrete surface. Consumption will vary depending on surface conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e 0 - 4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmbient air temperature:\u003c\/strong\u003e Minimum 10°C, Maximum 35°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePot Life:\u003c\/strong\u003e 10 - 15 Minutes @ 23°C. Do not mix more product than can be applied within 15 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaiting time to overcoating:\u003c\/strong\u003e Flooring can be installed only when the surface is dry and can be worked on without damage (usually 20 – 30 minutes @ 23°C).\u003c\/p\u003e\n\u003ch3\u003eImportant Considerations \/ Limitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not bond directly to timber, parquet, sponge back vinyl flooring, metal, fiberglass, plastic, or OSB panels.\u003c\/li\u003e\n\u003cli\u003eSikafloor Level PRO Finish must not be installed over surfaces with continual movement.\u003c\/li\u003e\n\u003cli\u003eDo not use when the temperature is below 10°C.\u003c\/li\u003e\n\u003cli\u003eDo not use in exterior applications.\u003c\/li\u003e\n\u003cli\u003eKeep product cool prior to mixing and do not leave in direct sun for extended periods.\u003c\/li\u003e\n\u003cli\u003eAll construction\/expansion joints in existing concrete must be reflected through the Sikafloor product as soon as possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Instructions\u003c\/h3\u003e\n\u003ch4\u003eEquipment\u003c\/h4\u003e\n\u003cp\u003eHigh speed drill \u0026amp; mixing paddle, bucket + trowel\u003c\/p\u003e\n\u003ch4\u003eSubstrate Quality \/ Pre-treatment\u003c\/h4\u003e\n\u003cp\u003eConcrete floors should be fully cured, structurally sound, clean, dry, and free of surface contaminates and dust for Eg. Concrete must be porous and accept water penetration. Test by lightly sprinkling water on various areas of the substrate. If water penetrates, then a good bond with Sikafloor Level PRO Finish can be achieved. If water beads and fails to be absorbed by the concrete surface contaminants are present then loss of adhesion may occur. Contaminates that are present should be mechanically removed before installation. Concrete must be free of efflorescence and not subject to hydrostatic pressure. If efflorescence or high moisture is identified, Sikafloor Moisture Barrier System may be considered (Sikafloor-158 W Fast Barrier + Sikafloor-14 Prep N Prime + Sikafloor Level Pro Finish). Masonite or CFC underlay must be mechanically fixed + adhered as per manufacturers guidelines and AS standards.\u003c\/p\u003e\n\u003ch4\u003ePriming:\u003c\/h4\u003e\n\u003cp\u003ePriming is generally not required over trowelled concrete, however very porous (mechanically prepared) surfaces should be primed with diluted Sikafloor 01 Primer before applying Sikafloor Level PRO Finish. Non-porous Surfaces: Clean thoroughly to remove all dust residue before applying Sikafloor 14 Prep N Prime to tiled\/epoxy surface followed by Sikafloor Level PRO Finish. Note: Multiple coats of Sikafloor Level PRO Finish may be required with non-porous applications over Sikafloor 14 Prep N Prime\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eApply mixed product to the prepared surface with a flat steal trowel. While using force against the surface a thin layer is applied to seal the concrete and fill minor imperfections.\u003c\/p\u003e\n\u003ch4\u003eCleaning of Equipment\u003c\/h4\u003e\n\u003cp\u003eClean tools and equipment with warm water while the product is still wet.\u003c\/p\u003e\n\u003cp\u003eOrder Sikafloor Level PRO Finish from ProTrade Warehouse for reliable trade prices and fast delivery across Australia. We also offer convenient pickup options from Sika warehouses and our Silverwater store. As a leading Sika distributor, we provide quality products and excellent service.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567433920576,"sku":"SF-LP-9","price":100.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sikafloorlevelprofinish.png?v=1767827586"},{"product_id":"sika-sikafloor-level-eco","title":"Sikafloor Level Eco 20 KG","description":"\u003cp\u003eSikafloor Level Eco is an economical, polymer-modified cementitious levelling and smoothing compound designed for high build applications up to 75mm. It's suitable for both manual and pump application in commercial and residential projects, providing a smooth underlayment for various floor coverings.\u003c\/p\u003e\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApplied as an underlayment in combination with suitable materials from Sikafloor, SikaBond, Sikadur, SikaTite, SikaTile \u0026amp; Davco ranges.\u003c\/li\u003e\n\u003cli\u003eSuitable for pumping application over large areas.\u003c\/li\u003e\n\u003cli\u003eLevelling uneven concrete substrates up to 75mm in thickness.\u003c\/li\u003e\n\u003cli\u003eFor use on new or old internal concrete substrates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVery Low VOC\u003c\/li\u003e\n\u003cli\u003eNon-combustible\u003c\/li\u003e\n\u003cli\u003eGreen Star Certified\u003c\/li\u003e\n\u003cli\u003eHigh strength\u003c\/li\u003e\n\u003cli\u003eEconomical levelling solution\u003c\/li\u003e\n\u003cli\u003eSimply mix \u0026amp; apply - No slaking or re-mixing required\u003c\/li\u003e\n\u003cli\u003eGood pot life and working time - slow setting\u003c\/li\u003e\n\u003cli\u003ePump or manual application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposition:\u003c\/strong\u003e Polymer modified cement compound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20kg Bag (48 bags per pallet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance and colour:\u003c\/strong\u003e Grey powder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolatile organic compound (VOC) content:\u003c\/strong\u003e 1 Gram per litre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength:\u003c\/strong\u003e 1 day cure – 14-15 MPa, 28 day cure – 25-30 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength (28 day cure):\u003c\/strong\u003e 5-5.5 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater absorption:\u003c\/strong\u003e Porous\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYield:\u003c\/strong\u003e 12 litres - 4 m² at 3mm thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e 3 - 75mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio:\u003c\/strong\u003e 3.5 - 3.8 litres of clean, cool water per 20kg bag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot Life (at 23°C):\u003c\/strong\u003e 20 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitial set time (at 23°C):\u003c\/strong\u003e 80 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaiting time to overcoating (at 23°C):\u003c\/strong\u003e Allow 24+ hours (dependent on thickness and conditions).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimitations of Use:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not install over particleboard, hardwood, parquet, or metal. Suitable for concrete only.\u003c\/li\u003e\n\u003cli\u003eDo not apply below 10°C or above 35°C, or in hot and windy conditions.\u003c\/li\u003e\n\u003cli\u003eProtect from extreme temperatures and winds for 12 hours after application.\u003c\/li\u003e\n\u003cli\u003eExisting concrete joints must be reflected through the Sikafloor product.\u003c\/li\u003e\n\u003cli\u003eNot recommended as a trafficable surface or for sloped\/wet areas or exterior applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Instructions:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate Quality \/ Pre-treatment:\u003c\/strong\u003e Concrete should be cured, sound (min. pull off 1.5 MPa), clean, dry, and porous. Prime with Sikafloor 01 Primer or Sikafloor Level Pro Primer (for porous) or Sikafloor-14 Prep 'N' Prime (for non-porous\/high moisture).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing:\u003c\/strong\u003e Mix one 20kg bag with 3.5 - 3.8 litres of clean, cool water for at least 2 minutes to a lump-free consistency. Avoid part-bag mixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Pour or pump and spread with a gauged spreader. Use a flat steel trowel for touch-ups. Ensure good airflow for drying. For a second coat (\"wet-on-wet\"), apply within 2-4 hours. Otherwise, re-prime and apply the next day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning of Equipment:\u003c\/strong\u003e Clean tools with warm water and detergent while wet.\u003c\/p\u003e\n\u003cp\u003e Get unbeatable trade prices and fast nationwide shipping on all Sika products. Pick up your order from our store, Sika Wetherill Park in Sydney, or any Sika warehouse nationwide. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"Sika Applied Series - Sikafloor Level Eco\" src=\"https:\/\/www.youtube.com\/embed\/hktvQHTnhgg\" height=\"300\" width=\"350\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567437754432,"sku":"2DF75D","price":48.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sikafloor_Level_Eco.png?v=1767827644"},{"product_id":"sikafloor-01-primer","title":"Sikafloor 01 Primer - 5L","description":"\u003ch3\u003eConcentrated Primer for Flooring \u0026amp; Tiling Systems\u003c\/h3\u003e\n\u003cp\u003eSikafloor-01 Primer is a concentrated synthetic resin primer designed for pre-treating surfaces before the application of cement and gypsum-based products. This solvent-free primer seals porous concrete, enhances bond strength, and eliminates dust.\u003c\/p\u003e\n\u003ch3\u003eUses:\u003c\/h3\u003e\n\u003cp\u003eApplied in combination with suitable materials from Sikafloor®, SikaBond®, Sikadur®, SikaTite®, \u0026amp; Davco® ranges. It is suitable for pre-treating various surfaces to enhance bond strength for internal and external commercial, residential, and industrial installations.\u003c\/p\u003e\n\u003ch3\u003eCharacteristics \/ Advantages:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEMICODE EC 1PLUS certified (Very Low VOC)\u003c\/li\u003e\n\u003cli\u003eBLUE ANGEL certified (Eco-friendly)\u003c\/li\u003e\n\u003cli\u003eSolvent-free\u003c\/li\u003e\n\u003cli\u003eSeals porous concrete\u003c\/li\u003e\n\u003cli\u003eLow consumption - high coverage\u003c\/li\u003e\n\u003cli\u003eNon-combustible\u003c\/li\u003e\n\u003cli\u003eGreat penetration into porous concrete surfaces\u003c\/li\u003e\n\u003cli\u003eCan be applied neat over timber\/wood, CFC \u0026amp; Scyon\u003c\/li\u003e\n\u003cli\u003eSuitable for application on subfloor heating systems\u003c\/li\u003e\n\u003cli\u003eEliminates dust\u003c\/li\u003e\n\u003cli\u003eVersatile water dilution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSustainability:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGreen Star VOC-SCQMD Rule 1168\u003c\/li\u003e\n\u003cli\u003eEPD according to ISO 14025 and EN 15804\u003c\/li\u003e\n\u003cli\u003eSolvent-free according to TRGS 610\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposition:\u003c\/strong\u003e Synthetic resin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 5L plastic bottle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance and colour:\u003c\/strong\u003e Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1L = 1kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio:\u003c\/strong\u003e 1:3 with clean cool water (refer to datasheet for substrate-specific dilution)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption:\u003c\/strong\u003e 1:3 dilution ~ 7 - 8 m² per mixed litre (average, depends on substrate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient air temperature:\u003c\/strong\u003e +5 °C to +35 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate temperature:\u003c\/strong\u003e +5 °C to +35 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaiting time to overcoating:\u003c\/strong\u003e Refer to the datasheet for substrate-specific waiting times (approx. 10 mins to 24 hours per coat at 23 °C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Considerations:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not mix or apply Sikafloor-01 Primer in temperatures below 10°C and above 35°C.\u003c\/li\u003e\n\u003cli\u003eSikafloor-01 Primer is not recommended as a trafficable seal coat over cement-based materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Instructions:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate Quality \/ Pre-treatment:\u003c\/strong\u003e Concrete should be cured, sound (min. pull off 1.5 MPa), clean, dry, and porous. Timber should be clean and sanded. Refer to datasheet for specific substrate preparation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing:\u003c\/strong\u003e Mix Sikafloor-01 Primer with clean cool water at the recommended ratio (1:3 is common for porous concrete).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Apply diluted primer with a soft bristle broom or long-napped roller, ensuring good penetration and film build. For very porous surfaces, a second coat is recommended. Apply neat on timber\/wood, CFC \u0026amp; Scyon. Apply subsequent materials as soon as primer is dry (within 24 hours).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning of Equipment:\u003c\/strong\u003e Clean all tools with water immediately after use.\u003c\/p\u003e\n\u003cp\u003e Get unbeatable trade prices and fast nationwide shipping on all Sika products. Pick up your order from our store, Sika Wetherill Park in Sydney, or any Sika warehouse nationwide. \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"300\" height=\"300\" src=\"https:\/\/www.youtube.com\/embed\/cLWEMb-P3RI\" title=\"Sika Applied Series - Sikafloor 01 Primer\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567437819968,"sku":"2C50F7","price":125.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sikafloor_01_Primer.png?v=1767827165"},{"product_id":"sika-floor-4020-fiberlevel-floor-levelling-compound","title":"Sikafloor 4020 FiberLevel - 20kg - Cement Levelling Systems","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSikafloor 4020 FiberLevel - Fast Drying Self Levelling Compound \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eLooking for a fast-drying and fiber-reinforced self-levelling compound in Australia? Sikafloor-4020 FiberLevel is a hybrid technology solution ideal for levelling subfloors before installing various floor coverings. Its unique formulation makes it suitable for both rigid and semi-flexible substrates, including timber and plywood.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Sikafloor-4020 FiberLevel in Australia?\u003c\/h3\u003e\n\u003cp\u003eThis self-levelling compound offers several key advantages for your flooring projects:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Reinforced:\u003c\/strong\u003e Embedded fibers provide reinforcement, making it suitable for timber and CFC type subfloors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Drying:\u003c\/strong\u003e Allows for light foot traffic after approximately 2 hours and installation of moisture-sensitive flooring after 6-7 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Strength:\u003c\/strong\u003e Offers high compressive and flexural strength for a durable and stable base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Substrate Application:\u003c\/strong\u003e Suitable for use over concrete, timber, plywood, CFC sheets, and soundly adhered tiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Underfloor Heating:\u003c\/strong\u003e Can be used with underfloor heating systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery Low VOC:\u003c\/strong\u003e Contributes to better indoor air quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood Pot Life:\u003c\/strong\u003e Provides sufficient working time for application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere Can You Use Sikafloor-4020 FiberLevel in Australia?\u003c\/h3\u003e\n\u003cp\u003eThis self-levelling compound is recommended for interior applications in:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCommercial and domestic settings as an underlayment for all types of floor coverings.\u003c\/li\u003e\n\u003cli\u003eApplications over semi-flexible substrates like soundly fixed timber, chipboard, plywood, or CFC sheets.\u003c\/li\u003e\n\u003cli\u003eLevelling new or old concrete substrates.\u003c\/li\u003e\n\u003cli\u003eLevelling over soundly adhered tiles, stone, or vinyl.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Product Features:\u003c\/h3\u003e\n\u003cp\u003eHere's a summary of the key features of Sikafloor-4020 FiberLevel:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHybrid Technology (Calcium Sulphate and Cement)\u003c\/li\u003e\n\u003cli\u003eFiber Reinforced\u003c\/li\u003e\n\u003cli\u003eFast Drying\u003c\/li\u003e\n\u003cli\u003eHigh Compressive Strength\u003c\/li\u003e\n\u003cli\u003eHigh Flexural Strength\u003c\/li\u003e\n\u003cli\u003eVery Low VOC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eColour:\u003c\/h3\u003e\n\u003cp\u003eThe product is a powder, white in colour.\u003c\/p\u003e\n\u003ch3\u003eConsumption:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eYield: \u003c\/strong\u003e\u003cspan\u003e12L - 4m2 @ 3mm thickness\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNote: These figures are theoretical. Actual coverage may vary depending on the substrate's profile and application technique.\u003c\/p\u003e\n\u003ch3\u003eApplication Guidelines (Refer to Full Product Data Sheet for Detailed Instructions):\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing Ratio:\u003c\/strong\u003e 4.3 - 4.4 Litres of clean, cool water per 20 kg bag of powder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Thickness:\u003c\/strong\u003e 3 - 20 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate Preparation:\u003c\/strong\u003e Proper preparation is crucial and varies depending on the substrate type (concrete, timber, tiles, etc.). Priming is generally required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePriming:\u003c\/strong\u003e Specific primers and dilution ratios are required depending on the substrate (refer to the product data sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying Times:\u003c\/strong\u003e Vary depending on temperature, humidity, and substrate. Check the data sheet for specific times before installing floor coverings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Considerations:\u003c\/h3\u003e\n\u003cp\u003ePlease note the following important points before using Sikafloor-4020 FiberLevel:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull bags should be mixed to ensure even fiber distribution.\u003c\/li\u003e\n\u003cli\u003eThis product is not compatible with other cements.\u003c\/li\u003e\n\u003cli\u003eAvoid contact with metal pipes.\u003c\/li\u003e\n\u003cli\u003eFollow all relevant Australian\/New Zealand standards.\u003c\/li\u003e\n\u003cli\u003eDo not apply in extreme temperatures.\u003c\/li\u003e\n\u003cli\u003eProtect bags from direct sunlight.\u003c\/li\u003e\n\u003cli\u003eExisting concrete joints must be reflected through the levelling compound.\u003c\/li\u003e\n\u003cli\u003eNot recommended for sloped surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Note:\u003c\/strong\u003e Before tiling, the dry Sikafloor-4020 FiberLevel surface must be primed with Sikafloor 01 Primer (AU) or Sikafloor 08 Primer (AU)\"NEAT\" undiluted. The undiluted applied Sikafloor 01 Primer (AU) or Sikafloor 08 Primer (AU)must dry for 2 hours minimum before tiling begins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20 kg bags\u003c\/p\u003e\n\u003cp\u003eAchieve a smooth, level base for your flooring in Australia with the fast-drying and fiber-reinforced Sikafloor-4020 FiberLevel!\u003c\/p\u003e\n\u003cp\u003eFor detailed product specifications, substrate preparation instructions, priming recommendations, and safety information, please refer to the latest Product Data Sheet and Safety Data Sheet available for Australia.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"Sika Subfloor System\" src=\"https:\/\/www.youtube.com\/embed\/o8WOSYQEvv8\" height=\"256\" width=\"455\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"Sika Applied Series - Sikafloor 4020 FiberLevel\" src=\"https:\/\/www.youtube.com\/embed\/WMCqBoApUIA\" height=\"256\" width=\"455\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567438999616,"sku":"07CB99","price":100.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/sikafloor_4020_fiberlevel.png?v=1767827405"},{"product_id":"sikafloor-14-prep-n-prime-primer","title":"Sikafloor 14 Prep 'N' Prime 10L","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePrepare Non-Porous Surfaces with Sikafloor 14 Prep 'N' Prime \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eLooking for a reliable primer to ensure excellent adhesion on smooth, non-absorbent surfaces in your Australian construction projects? Sikafloor®-14 Prep 'N' Prime is a solvent-free, 1-component primer specifically designed to create a strong bond for subsequent flooring materials.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Sikafloor 14 Prep 'N' Prime for Non-Porous Substrates in Australia?\u003c\/h3\u003e\n\u003cp\u003eThis advanced primer offers several key advantages for preparing challenging surfaces:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Adhesion:\u003c\/strong\u003e Specially formulated for sound, smooth, and non-absorbent substrates like tiles and existing coatings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to Use:\u003c\/strong\u003e Single component and requires no mixing, saving you time and effort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent Free \u0026amp; Very Low VOC:\u003c\/strong\u003e A more environmentally friendly and user-friendly option for indoor and outdoor applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Drying:\u003c\/strong\u003e Typically dries in 50 minutes or more at 23°C, allowing for quick overcoating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal \u0026amp; External Use:\u003c\/strong\u003e Suitable for a wide range of projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Application:\u003c\/strong\u003e Can be easily applied with a brush or roller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePromotes Grip:\u003c\/strong\u003e Dries to a keyed surface that enhances the adhesion of subsequent levelling compounds and other materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime-Saving:\u003c\/strong\u003e A practical alternative to mechanical grinding on non-porous surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Sika Systems:\u003c\/strong\u003e Designed for use with various Sikafloor®, SikaBond®, Sikadur®, SikaTite®, and Davco® products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere Can You Use Sikafloor®-14 Prep 'N' Prime in Australia?\u003c\/h3\u003e\n\u003cp\u003eThis primer is ideal for preparing the following clean and bonded surfaces:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCeramic \u0026amp; porcelain tiles\u003c\/li\u003e\n\u003cli\u003eTerrazzo\u003c\/li\u003e\n\u003cli\u003eNon-porous coatings\u003c\/li\u003e\n\u003cli\u003eSikafloor®-158 W Fast Barrier (Moisture Barrier)\u003c\/li\u003e\n\u003cli\u003eVinyl flooring\u003c\/li\u003e\n\u003cli\u003eDavco® or SikaTite® acrylic membranes\u003c\/li\u003e\n\u003cli\u003eSikafloor® Epoxy Coatings (cured for at least 24 hours)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Product Features:\u003c\/h3\u003e\n\u003cp\u003eHere's a summary of the key features of Sikafloor®-14 Prep 'N' Prime:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolvent Free\u003c\/li\u003e\n\u003cli\u003e1-Component, Ready to Use\u003c\/li\u003e\n\u003cli\u003eVery Low VOC\u003c\/li\u003e\n\u003cli\u003eFast Drying\u003c\/li\u003e\n\u003cli\u003eNon DG Storage\u003c\/li\u003e\n\u003cli\u003eLight Blue Liquid (easy to see coverage)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Guidelines (Refer to Full Product Data Sheet for Detailed Instructions):\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption:\u003c\/strong\u003e Approximately ~ 8m² per litre (may vary based on substrate texture and application).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient Temperature:\u003c\/strong\u003e +5 °C to 35 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaiting Time to Overcoating:\u003c\/strong\u003e Minimum 50 minutes at 23°C (must be completely dry).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Considerations:\u003c\/h3\u003e\n\u003cp\u003ePlease note the following important points before using Sikafloor®-14 Prep 'N' Prime:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not apply over concrete surfaces.\u003c\/li\u003e\n\u003cli\u003eShould not be applied over solvent-based finishes.\u003c\/li\u003e\n\u003cli\u003eExternal applications require full drainage and are not suitable for submerged conditions.\u003c\/li\u003e\n\u003cli\u003eOnly apply over SikaTite® or Davco® acrylic membranes.\u003c\/li\u003e\n\u003cli\u003eSikafloor® 100% Solids Epoxy must be cured for at least 24 hours before application.\u003c\/li\u003e\n\u003cli\u003eDo not apply onto wet or damp substrates.\u003c\/li\u003e\n\u003cli\u003eBond testing is recommended to verify product suitability for specific substrates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 10 Ltr Pail\u003c\/p\u003e\n\u003cp\u003eEnsure a strong foundation for your flooring projects in Australia with Sikafloor®-14 Prep 'N' Prime!\u003c\/p\u003e\n\u003cp\u003eFor detailed product specifications, substrate preparation instructions, and safety information, please refer to the latest local Product Data Sheet and Safety Data Sheet available for Australia.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567439556672,"sku":"843254","price":292.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sikafloor_14_prep_N_Prime.png?v=1767827164"},{"product_id":"sikafloor-215-rapid-screed-20kg","title":"Sikafloor 215 Rapid Screed - 20kg","description":"\u003csection\u003e\n\u003cp\u003e\u003cstrong\u003eNeed a fast-setting, high-strength screed?\u003c\/strong\u003e Sikafloor 215 Rapid Screed is a premium, pre-mixed screed designed for quick and reliable flooring results. It offers easy application, a good working time, and achieves high strength with low moisture within 24 hours. Ideal for both internal and external applications, this screed is perfect for residential and commercial flooring installations. \u003c\/p\u003e\n\u003csection id=\"details\"\u003e\n\u003cp\u003eCompatible products: Sikafloor, SikaBond, Sikadur, SikaTite \u0026amp; Davco ranges.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\u003c\/section\u003e\n\u003c\/section\u003e\n\u003csection id=\"details\"\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eKey Features \u0026amp; Benefits:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-mixed binder with selected aggregates for consistent quality.\u003c\/li\u003e\n\u003cli\u003eHigh strength: ~40MPa after 28 days.\u003c\/li\u003e\n\u003cli\u003eGood working time: 20-30 minutes at 23°C.\u003c\/li\u003e\n\u003cli\u003eLow shrinkage for durable results.\u003c\/li\u003e\n\u003cli\u003eFast tile installation: Tiles can be installed after 15 hours.\u003c\/li\u003e\n\u003cli\u003eVersatile application: Suitable for all residential and commercial flooring installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eUses:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInternal spaces\u003c\/li\u003e\n\u003cli\u003eExternal spaces\u003c\/li\u003e\n\u003cli\u003eBonded screed: 10mm - 60mm\u003c\/li\u003e\n\u003cli\u003eUn-bonded screed: 30mm - 80mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eTechnical Information:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMixing ratio: 1.9 - 2.1 Litres of clean, cool water per 20kg bag.\u003c\/li\u003e\n\u003cli\u003eAmbient air temperature: 5°C - 35°C.\u003c\/li\u003e\n\u003cli\u003ePot life: 20 - 30 minutes at 23°C.\u003c\/li\u003e\n\u003cli\u003eWaiting time to overcoating:\n\u003cul\u003e\n\u003cli\u003eTiles or levelling systems: 15 hours at 23°C.\u003c\/li\u003e\n\u003cli\u003eImpervious floor coverings or membranes: 3 days at 23°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDrying: Drying is dependent on thickness of application, temperature, air flow \u0026amp; relative humidity. Increased air flow will help with drying speeds in cooler temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePackaging:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e20kg bag.\u003c\/li\u003e\n\u003cli\u003ePallet: 48 bags.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003cp\u003e\u003cstrong\u003eReady to get started?\u003c\/strong\u003e Contact Us for more information on Sikafloor 215 Rapid Screed.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":40567439786048,"sku":"493630","price":30.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6210\/1824\/files\/Sikafloor_215_Rapid_Screed.png?v=1767827525"}],"url":"https:\/\/protradewarehouse.com.au\/collections\/cement-levelling-systems\/epoxy-system_solid-colour.oembed","provider":"Protrade Warehouse | Trade \u0026 DIY Supplies Australia-Wide","version":"1.0","type":"link"}